1-800-315-4345
![Off-Grid EG4 System Bundle - 12kW 120/240V Output / 48VDC - 30.72kWh EG4 Lithium Battery Bank | 2 x EG4 6000XP | 6x EG4 Server Rack Batteries [BNDL-E0008]](http://minisplitsystemsdirect.com/cdn/shop/files/bndl-e0008__50911_600x.jpg?v=1724202023)
![Complete Hybrid Solar Kit - EG4 PowerPro ESS | 12 kW AC Output | Up To 45 kWh Battery Backup [Kit-E0007]](http://minisplitsystemsdirect.com/cdn/shop/files/490_source_1719931806_600x.webp?v=1726195104)
36,000 BTU ACiQ 3- Zone Wall Mounted Mini Split System w/ Central Air Handler 9+9+18
ACiQ's multi zone mini split systems are designed to give you intelligent technology and superior comfort, all at a reasonable cost. With the ACiQ Extreme Heat multi zone series ACiQ-36Z-HH-M4B/ACiQ-09W-HH-MC-2/ACiQ-18AHB-HH-M-1 system, you get higher SEER and better low ambient (hyper heat) performance than the competition.
36,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat
Overview
ACiQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ACiQ-36Z-HH-M4, you can have up to 4 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.
Quick Facts
- 36,000 BTU, 21.5 SEER multi zone heat pump condenser
- Designed to function with up to 4 attached air handlers
- Efficient cooling from 5°F to 122°F outdoor temperatures
- Efficient heating from -22°F to 75°F outdoor temperatures
- Integrated Extreme Heat technology with base pan heater
- Gold Fin full-protection coating on condenser coil
- Quiet operation at even the highest workloads
36,000 BTU, 21.5 SEER
The 36,000 BTU, ACiQ-36Z-HH-M4 is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 21.5 SEER, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.
Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section above on this page. For all multi zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.
Extreme Heat Base Pan Heater Technology
Each ACiQ condenser has integrated Extreme Heat technology to maximize heat performance in extreme cold weather. Extended heat pump performance (HyperHeat) harnesses the power of inverter condenser with outdoor temp sensing, variable refrigerant flow and variable condenser fan speed to maximize heat extraction all the way down to -22°F. Plus, every Extreme Heat ACiQ condenser includes a base pan heater to keep ice from collecting on the condenser coil during heat pump operation.
Quality Construction
State-of-the-Art manufacturing is behind every ACiQ product, resulting in quiet, effective operation over a long service life. Most models have low ambient heating and cooling.
Highest Efficiency
ACiQ saves you money up front, but also over time by reducing energy bills. Every ACiQ condenser features a variable inverter twin rotary compressor, lowering wear and increasing performance. Compare specs against other brands in the same price category, and you will agree, ACiQ is the best value.
Longer life, longer warranty
Intelligent design goes into every element of ACiQ’s manufacturing ensuring flawless performance for years. Low friction, variable inverter twin rotary compressors give bulletproof reliability. This system is protected by ACiQ's 7 years parts, and 12 years compressor warranty.
Installation and Maintenance
ACiQ multi zone condensers are pre-charged with R410-A refrigerant for 25' per air handler connection. In many cases, no additional refrigerant is needed. All units are run-tested at the factory for years of trouble-free performance. Troubleshooting is easy thanks to unit's self diagnosing control board with alerts that are sent to each connected air handler.
9,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi
Platinum Performance
ACiQ Platinum air handlers can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system. This air handler can handle small to medium sized rooms using adaptive technology to constantly monitor and maintain your ideal temperature no matter what the weather outside.
- 9,000 BTU wall mounted air handler with included remote control
- WiFi capable using free Net Home Plus app , Google Home or Alexa
- Easier maintenance and installation
- Multizone compatible heat or cool multiple rooms on one outdoor unit
- Enhanced Dry mode, intelligent sleep mode, power save mode.
Intelligent Heating and Cooling
The ACiQ-09W-HH-MB air handler includes a soft LED display on the front of the unit giving you information at a glance. The display shows room temperature by default but can also show temperature setpoint changes and mode changes. To ensure your unit runs properly throughout its lifetime, this display will also show any error codes from its self-diagnosing control board. The display can be switched off if desired, and the included smart remote has a built-in LCD display to show these notifications as well.
WiFi Options
ACiQ is WiFi ready! The wall mounted air handlers come with everything you need to control your home's heating and cooling via smart device (iOS or Android) from anywhere in the world. ACiQ is also compatible with Amazon Alexa and Google Assistant.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost if not already included in this product bundle.
Wall Mounted
Traditional wall-mounted air handlers are the most popular ductless choice due to low cost and ease of installation. Wall mounted units are located high on an outside wall, with refrigerant lines and condensation drain hose exiting the back through a 3" wall penetration. Return air is brought in through vents in the top of the unit, and cooled or heated air exits the lower front through a sweepable louver. Wall mounted air handlers are WiFi compatible and can be controlled by the free NetHome Plus app or by voice assistants such as Alexa or Google Home.
Smartphone App
In addition to the handheld or wired remote that is already included, wall mounted units are WiFi ready, and can be controlled from anywhere with a free app on your tablet or smartphone.
Quiet Comfort
Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.
18,000 BTU ACiQ Multi Zone Ducted Air Handler
The Ductless Multi Zone air handlers seamlessly connect to your existing ductwork, allowing you to combine ducted heating and cooling with traditional mini split air handlers. This comprehensive system, powered by a single outside condenser, ensures maximum comfort, energy efficiency, and zoned control for independent temperature regulation in different areas of your home. The indoor units draw power from the outdoor condenser, eliminating the need for additional circuits unless you choose to install optional electric backup heat. These air handlers are particularly suitable for homes that have existing ductwork in some areas but lack it in others, such as finished basements, attics, or additions.
Features
- 18,000 BTU, 1.5 Ton central ducted air handler
- Matches with Multi Zone and Platinum Single Zone condensers
- Can be used as part of a Multi Zone system with other air handlers
- Variable DC blower
- Upflow, downflow, horizontal left or right
- Manufactured home and mobile home approved
- Wired controller included, with remote control for setup
- Can be wired to 24V thermostats - see Quick Start Guide below
- Wifi compatible with optional KJR-120N controller
What's Included:
- 1x 36,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat
- 2x 9,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi
- 1x 18,000 BTU ACiQ Multi Zone Ducted Air Handler
Condenser Specifications:
| Manufacture | ACiQ |
| SKU | ACiQ-36Z-HH-M4B |
| Refrigerant Charge |
100' |
| Weight |
255.070000 |
| AHRI Certificate Number |
207825582 |
| HSPF | 10.5 |
| Cooling BTU | 36000 BTU |
| Heating BTU | 36000 BTU |
| Decibel Level (dBA) | 64 |
| Electric Heat | Heat Pump |
| Energy Star | Yes |
| Refrigerant | R410A |
| SEER | 21-22 |
| SEER2 | 22.2 |
| EER | 13.5 |
| Compressor Type | Rotary |
| Liquid Line | 1/4" (4) |
| Suction Line |
3/8" (3); 1/2" (1) |
| Electrical | 208/230V 1 Phase 60 Hz |
| Max Breaker Size |
60 Amps |
| Min. Breaker Size |
40 Amps |
| Tonnage |
3 Ton |
| BTU/Tonnage | 36,000 BTU/3 Ton |
| Mini-Split Type | Wall Mounted |
| Zone Compatibility | Multi Zone |
| Ambient Temperature Range | -22 ~ 122 |
| Height |
52-1/2" |
| Width |
37-1/2" |
| Depth |
16-2/5" |
| Warranty | 12 year compressor, 7 year parts with online registration |
| Resources | |
| Safety Information | Proposition 65 Warning |
9K Air Handler Specifications:
| Manufacturer | ACiQ |
| SKU | ACiQ-09W-HH-MC |
| Weight | 22.700000 |
| Cooling BTU | 9000 BTU |
| Heating BTU | 10000 BTU |
| Maximum CFM | 247 |
| Decibel Level (dBA) | 38 |
| Electric Heat | Heat Pump |
| Refrigerant | R410A |
| SEER | 23-24 |
| SEER2 | 22.3 |
| Liquid Line | 1/4" |
| Suction Line | 3/8" |
| Electrical | 208/230V 1 Phase 60 Hz |
| BTU/Tonnage | 9,000 BTU/0.75 Ton |
| Mini-Split Type | Wall Mounted |
| Zone Compatibility | Multi Zone |
| Height | 11-4/5" |
| Width | 33-2/5" |
| Depth | 9-1/5" |
| Warranty | 12 year compressor, 7 year parts with online registration |
| Resources | |
| Safety Information | Proposition 65 Warning |
18K Air Handler Specifications:
| Manufacturer | ACIQ |
| SKU |
ACIQ-18AHB-HH-M |
| Refrigerant Charge | 25' |
| Weight | 127.210000 |
| HSPF2 | 9.6 |
| Cooling BTU | 18000 BTU |
| Heating BTU | 18000 BTU |
| Maximum CFM | 617 |
| Decibel Level (dBA) | 39 |
| Electric Heat | Heat Pump |
| Electric Backup Heat Capabilities (Optional) | 5 Kilowatts, 10 Kilowatts |
| Energy Star | Yes |
| Refrigerant | R410A |
| SEER2 | 17.5 |
| Liquid Line | 1/4" |
| Suction Line | 1/2" |
| Electrical | 208/230V 1 Phase 60 Hz |
| Max Breaker Size | 25 |
| Min. Breaker Size | 20 |
| Tonnage | 1.5 Ton |
| Tonnage Bundle | 1.5 Ton |
| BTU/Tonnage | 18,000 BTU/1.5 Ton |
| Mini-Split Type | Multi-Positional |
| Zone Compatibility | Single Zone |
| Height | 45" |
| Width |
21.02" |
| Depth | 17.52" |
| Warranty | 12 year compressor, 7 year parts with online registration |
| Resources | |
| Safety Information | Proposition 65 Warning |
Beginner’s Guide to Choosing the Right Size BTU HVAC System
If you’re new to HVAC (Heating, Ventilation, and Air Conditioning) systems, selecting the right size BTU (British Thermal Unit) system can seem daunting. This guide will break down the process into simple steps.
1. What is BTU?
- Definition: BTU measures the amount of energy needed to heat or cool a space. More BTUs mean more heating or cooling power.
2. Why Size Matters
- An undersized system will struggle to heat or cool your home, leading to discomfort.
- An oversized system will cycle on and off too frequently, wasting energy and causing wear and tear.
3. Measure Your Space
-
Find Your Square Footage:
- Measure the length and width of each room.
- Multiply the length by the width for each room, then add them up for the total square footage.
-
Example:
- Living Room: 15 ft x 20 ft = 300 sq. ft.
- Bedroom: 10 ft x 12 ft = 120 sq. ft.
- Total = 300 + 120 = 420 sq. ft.
4. General BTU Guidelines
- A rough estimate is 20 BTUs per square foot.
- Example: For 420 sq. ft.: 420 sq. ft. × 20 BTUs/sq. ft. = 8,400 BTUs
5. Adjusting BTU Calculations Based on Specific Factors
When determining the right BTU size for your HVAC system, it's important to consider various factors that can affect your heating and cooling needs. Here’s a more detailed breakdown:
- Ceiling Height
- Standard Ceiling (8 feet): The basic BTU calculation (20 BTUs per square foot) works well.
-
Higher Ceilings: For ceilings taller than 8 feet, you’ll need to increase the BTU calculation. A common rule of thumb is to add about 10% for each additional foot of height.
-
Example: If you have a 10-foot ceiling in a 400 sq. ft. room:
- Base BTUs:
- Increase for height:
- Total BTUs Needed:
-
Example: If you have a 10-foot ceiling in a 400 sq. ft. room:
- Insulation Quality
- Well-Insulated Homes: If your home has good insulation, you can stick with the basic BTU calculation.
- Average Insulation: If your home has average insulation, consider adding 10% to your BTU needs.
-
Poor Insulation: For homes with poor insulation, you may need to add 20% or more. Check for drafts, gaps, or insufficient insulation in walls and attics.
-
Example: If your calculated BTUs are 10,000 and you have poor insulation:
- Increase by 20%:
- Total BTUs Needed:
-
Example: If your calculated BTUs are 10,000 and you have poor insulation:
- Windows
- Standard Windows: If you have standard double-pane windows, the basic BTU estimate should suffice.
-
Large or Single-Pane Windows: If you have large windows or single-pane windows (which are less efficient), add extra BTUs:
- For each large window, add 500-1,000 BTUs.
- For single-pane windows, consider adding 10-20% to your BTU needs.
-
Example: If your home requires 10,000 BTUs and you have two large windows:
- Add 1,000 BTUs per window:
- Total BTUs Needed:
- Climate Zone
- Hot Climates: If you live in a region with extreme heat, consider increasing your BTUs by 10-20%.
- Cold Climates: In very cold areas, you might also need to add 10-20% for heating.
-
Mild Climates: For areas with mild weather, the basic calculation should suffice.
-
Example: If your calculated BTUs are 10,000 and you live in a hot climate:
- Increase by 15%:
- Total BTUs Needed:
-
Example: If your calculated BTUs are 10,000 and you live in a hot climate:
- Occupancy
- General Rule: Each additional person beyond the first two generates about 600 BTUs of heat.
-
Frequent Guests or Large Families: If you regularly have guests or a large family, factor in the additional heat.
-
Example: If your home is sized for 10,000 BTUs and you expect 4 additional occupants:
- Add BTUs.
- Total BTUs Needed:
-
Example: If your home is sized for 10,000 BTUs and you expect 4 additional occupants:
6. Consult Professionals
- It’s a good idea to consult an HVAC professional for an accurate assessment. They can perform a detailed analysis (often called a Manual J calculation) to determine the exact BTUs needed based on your home’s specifics.
We've also left a chart below to help you determine the right size BTU for your home or business using the above guide.
| Square Footage | BTU Capacity |
|---|---|
| How many BTUs for 100 square feet? | 2,000 BTU |
| How many BTUs for 200 square feet? | 4,000 BTU |
| How many BTUs for 300 square feet? | 6,000 BTU |
| How many BTUs for 400 square feet? | 8,000 BTU |
| How many BTUs for 500 square feet? | 10,000 BTU |
| How many BTUs for 600 square feet? | 12,000 BTU |
| How many BTUs for 700 square feet? | 14,000 BTU |
| How many BTUs for 800 square feet? | 16,000 BTU |
| How many BTUs for 900 square feet? | 18,000 BTU |
| How many BTUs for 1000 square feet? | 20,000 BTU |
| How many BTUs for 1100 square feet? | 22,000 BTU |
| How many BTUs for 1200 square feet? | 24,000 BTU |
| How many BTUs for 1300 square feet? | 26,000 BTU |
| How many BTUs for 1400 square feet? | 28,000 BTU |
| How many BTUs for 1500 square feet? | 30,000 BTU |
| How many BTUs for 1600 square feet? | 32,000 BTU |
| How many BTUs for 1700 square feet? | 34,000 BTU |
| How many BTUs for 1800 square feet? | 36,000 BTU |
| How many BTUs for 1900 square feet? | 38,000 BTU |
| How many BTUs for 2000 square feet? | 40,000 BTU |
| How many BTUs for 2500 square feet? | 50,000 BTU |
| How many BTUs for 3000 square feet? | 60,000 BTU |
Thank you for visiting and shopping at Mini Split Systems Direct. Following are the terms and conditions that constitute our Shipping Policy.
Domestic Shipping Policy
Shipment processing time
All orders made before 2:00 PM EST are processed within 2-3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping rates & delivery estimates
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States. We do not currently ship to international locations.
| Destination | Shipping method | Processing Time | Estimated Delivery Time | Shipment cost |
| United States | Free Shipping |
2 - 3 business days | 3 - 7 days | Free |
Delivery delays can occasionally occur.
Shipment confirmation & Order tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Customs, Duties and Taxes
Mini Split Systems Direct is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Damages & Missing Items
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Pre-Orders, Backorders, and Out-of-Stock Items:
Mini Split Systems Direct is dedicated to sourcing any item you may need and getting it to you as quickly as possible. Any items that are out of stock, or available for Pre-Order will be noted on the product page. You are welcome to place an order for Pre-Order items, backorder items, and for items that are out of stock, and will ship them the second they become available from the manufacturer, ensuring you get the item before anyone else. If you have questions about lead times, please refer to the product page or contact us at info@minisplitsystemsdirect.com or give a call or text at 1-800-315-4345
Returns
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted.
You can always contact us for any return questions at info@minisplitsystemsdirect.com, or call us at 1-800-315-4345.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. A 15% restocking fee and the cost of return shipping will be deducted from the refund. Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
Cancellations
All orders canceled after 24 hours are subject to a 5% administration fee, If your order has not been shipped yet, this is the only fee you will incur. This is a fee that covers administrative and personnel fees.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order.
Damages and issues
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Exchanges
The fastest way to ensure you get what you want is to return the item you have (see return process above), and once the return is accepted, make a separate purchase for the new item.
Our goal is to consistently provide the best pricing in the marketplace online and we work very diligently to do so. If you happen to see another online shop that offers a lower price than us within six months of your date please let us know and we’ll be happy to refund the difference on your original payment method. Moreover, because we are consistently working with our suppliers to get better rates we know that you can feel very comfortable and confident that you are seeing the best prices that can be provided for the products listed on our site.
Moving forward if you find the same item that we carry on another website that has a lower price please submit that to us within six months of your purchase date and we will refund you the difference.
If it is a case of seeing a lower price on another website and we need to send a partial refund simply email us the link to the exact product and brand from our site and also the link from our competitors site so we can inspect the pricing. Again this needs to be within six months from the date of your order and we will review your submission and apply a credit if necessary.
Our Price Match Policy has some limitations:
- The item must have already been purchased from our site prior to asking for this to be reviewed and submitted.
- This does not include rebate programs or specific retailer programs such as buy three get one free type offers or any combination such as that are not eligible.
- The item will need to be in stock from the competitors site that you’re submitting the information from.
- The competitor must be an online store, they may not have a retail location, warehouse, showroom, or physical location.
- The website cannot be a wholesaler, liquidator, distributor, or auction website. Examples are eBay, Liquadation.com, Via Trading, Overstock, Wayfair, Amazon, Home Depot, Lowes, etc.
- The competitor must also be someone who has been authorized by the supplier and/or manufacturer to resell the product you are inquiring about.
- The price match will include the product listing price, but will exclude any sales tax.
Can I add a discount code to my order post-purchase?
Unfortunately were unable to add a discount code to your order after you've checked out, but, were happy to provide you with discount for your next purchase.
Can I add items to my order?
Yes, please contact us a soon as possible if you need to make changes to your order and will send an invoice for the remaining amount due. Please note this may result in you receiving your order in multiple packages, and yes, you will receive a tracking number for each package.
Can I change or modify my order?
Yes, you can change or modify your order within the first 24 hours after placing your order, after that, it will depend on the status of your order. If you need to change or modify your order, please contact us as soon as possible at info@minisplitsystemsdirect.com. If your order has already been processed and shipped, then we may be unable to change or modify your order.
Can I place my order to be delivered outside the United States?
At this time we do not ship internationally, but please contact us we may be able to accommodate you.
How can I remove items from my order?
If you need to remove items from your order, please contact us at info@minisplitsystemsdirect.com within the first 24 hours after you placed your order. After 24 hours, you are subject to a 5% fee for the item that is cancelled to cover incurred credit card processing fees. If your order has not been shipped yet, this is the only fee you will incur.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order. For more information, please see our return & refund policy here.
Do all the products you carry come with a warranty?
Yes, every product we carry includes a manufacturer warranty. If you need help with a warranty claim, please contact us at info@minisplitsystemsdirect.com and will help you resolve any issues you are experiencing with your product.
Do you have a storefront?
At this time we do not have a storefront, we're an online only Authorized Dealer for all the brand we carry. We do have plans to open a storefront in the future.
How do I check the status of my order?
After placing your order you'll receive a confirmation email, and after a Shipment Confirmation email once your order has shipped which will contain your tracking number(s). The tracking number will be active within 24 hours. If you have any other questions regarding the status of your order please contact us at info@minisplitsystemsdirect.com or message us by live chat.
How long is shipping and delivery?
All orders made before 2:00 PM EST are processed within 2 - 3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day. Estimated delivery time is 3 - 7 days.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Who do you ship with?
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States.
How long will it take to receive my refund?
Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
What is your return policy?
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted. Please see our full return & refund policy here.
What forms of payment do you accept?
We accept all credit cards, PayPal, Apple Pay, and you can pay in installments with Sezzle at checkout.
What should I do if my order is damaged or I'm missing items?
Please contact us within 48 hours of receiving your order at info@minisplitsystemsdirect.com and we'll resolve the issue ASAP.
What should I do if my order was marked as delivered but I haven't received it?
Although we cannot control what happens once your order leaves the warehouse and is in the hands of the shipping carrier, we will do everything we can to make sure you receive your order. If you have not received your order, please contact us at info@minisplitsystemsdirect.com with your order number, and provide us with any details that may help and rest assured, we will resolve the issue.
I’m having trouble tracking my order. What should I do?
If your order has just been shipped, please wait 24 hours for your tracking number to be updated properly with your latest tracking information. If after 24 hours your tracking information is not populating, please contact us at info@minisplitsystemsdirect.com and we will be more than happy to assist you.
Description
36,000 BTU ACiQ 3- Zone Wall Mounted Mini Split System w/ Central Air Handler 9+9+18
ACiQ's multi zone mini split systems are designed to give you intelligent technology and superior comfort, all at a reasonable cost. With the ACiQ Extreme Heat multi zone series ACiQ-36Z-HH-M4B/ACiQ-09W-HH-MC-2/ACiQ-18AHB-HH-M-1 system, you get higher SEER and better low ambient (hyper heat) performance than the competition.
36,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat
Overview
ACiQ is the smart solution to adaptive heating and cooling in almost any space and climate -all at an affordable cost. With the ACiQ-36Z-HH-M4, you can have up to 4 air handlers run off a single condenser, saving space outside and keeping you perfectly comfortable in your home.
Quick Facts
- 36,000 BTU, 21.5 SEER multi zone heat pump condenser
- Designed to function with up to 4 attached air handlers
- Efficient cooling from 5°F to 122°F outdoor temperatures
- Efficient heating from -22°F to 75°F outdoor temperatures
- Integrated Extreme Heat technology with base pan heater
- Gold Fin full-protection coating on condenser coil
- Quiet operation at even the highest workloads
36,000 BTU, 21.5 SEER
The 36,000 BTU, ACiQ-36Z-HH-M4 is designed to easily support up to 4 air handlers at up to 1.25 times the condenser BTU rating, or 45,000 BTU across all air handlers. This adaptive, inverter condenser is constantly self-adjusting to provide the precise amount of heating or cooling needed to maintain your desired temperature in each room or zone. You can set different temperatures room by room, even turn off heating and cooling in unused areas. This, combined with a high efficiency rating of 21.5 SEER, means you are buying a system designed to intelligently save you money both up front and over the lifetime of the unit.
Although the condenser is pre-charged, please note that this model of equipment does not have quick connect line set connectors and is not a self-install unit. You will need a professional to add more refrigerant and vacuum the lines as needed. Installation materials such as line sets, control wire, drain hose, whip and disconnect are not included, but are available at additional cost in the Accessories section above on this page. For all multi zone ACiQ condensers, a minimum of two air handlers is needed for the unit to function.
Extreme Heat Base Pan Heater Technology
Each ACiQ condenser has integrated Extreme Heat technology to maximize heat performance in extreme cold weather. Extended heat pump performance (HyperHeat) harnesses the power of inverter condenser with outdoor temp sensing, variable refrigerant flow and variable condenser fan speed to maximize heat extraction all the way down to -22°F. Plus, every Extreme Heat ACiQ condenser includes a base pan heater to keep ice from collecting on the condenser coil during heat pump operation.
Quality Construction
State-of-the-Art manufacturing is behind every ACiQ product, resulting in quiet, effective operation over a long service life. Most models have low ambient heating and cooling.
Highest Efficiency
ACiQ saves you money up front, but also over time by reducing energy bills. Every ACiQ condenser features a variable inverter twin rotary compressor, lowering wear and increasing performance. Compare specs against other brands in the same price category, and you will agree, ACiQ is the best value.
Longer life, longer warranty
Intelligent design goes into every element of ACiQ’s manufacturing ensuring flawless performance for years. Low friction, variable inverter twin rotary compressors give bulletproof reliability. This system is protected by ACiQ's 7 years parts, and 12 years compressor warranty.
Installation and Maintenance
ACiQ multi zone condensers are pre-charged with R410-A refrigerant for 25' per air handler connection. In many cases, no additional refrigerant is needed. All units are run-tested at the factory for years of trouble-free performance. Troubleshooting is easy thanks to unit's self diagnosing control board with alerts that are sent to each connected air handler.
9,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi
Platinum Performance
ACiQ Platinum air handlers can be used with any ACiQ Multizone condenser or the Platinum Single Zone condenser to create a highly efficient, Hyper Heat system. This air handler can handle small to medium sized rooms using adaptive technology to constantly monitor and maintain your ideal temperature no matter what the weather outside.
- 9,000 BTU wall mounted air handler with included remote control
- WiFi capable using free Net Home Plus app , Google Home or Alexa
- Easier maintenance and installation
- Multizone compatible heat or cool multiple rooms on one outdoor unit
- Enhanced Dry mode, intelligent sleep mode, power save mode.
Intelligent Heating and Cooling
The ACiQ-09W-HH-MB air handler includes a soft LED display on the front of the unit giving you information at a glance. The display shows room temperature by default but can also show temperature setpoint changes and mode changes. To ensure your unit runs properly throughout its lifetime, this display will also show any error codes from its self-diagnosing control board. The display can be switched off if desired, and the included smart remote has a built-in LCD display to show these notifications as well.
WiFi Options
ACiQ is WiFi ready! The wall mounted air handlers come with everything you need to control your home's heating and cooling via smart device (iOS or Android) from anywhere in the world. ACiQ is also compatible with Amazon Alexa and Google Assistant.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost if not already included in this product bundle.
Wall Mounted
Traditional wall-mounted air handlers are the most popular ductless choice due to low cost and ease of installation. Wall mounted units are located high on an outside wall, with refrigerant lines and condensation drain hose exiting the back through a 3" wall penetration. Return air is brought in through vents in the top of the unit, and cooled or heated air exits the lower front through a sweepable louver. Wall mounted air handlers are WiFi compatible and can be controlled by the free NetHome Plus app or by voice assistants such as Alexa or Google Home.
Smartphone App
In addition to the handheld or wired remote that is already included, wall mounted units are WiFi ready, and can be controlled from anywhere with a free app on your tablet or smartphone.
Quiet Comfort
Every ACiQ system is precision engineered to quickly achieve set temperature and hold it there, no matter what the weather is outside. With whisper quiet indoor and outdoor units, ACiQ never intrudes on your peace and quiet.
18,000 BTU ACiQ Multi Zone Ducted Air Handler
The Ductless Multi Zone air handlers seamlessly connect to your existing ductwork, allowing you to combine ducted heating and cooling with traditional mini split air handlers. This comprehensive system, powered by a single outside condenser, ensures maximum comfort, energy efficiency, and zoned control for independent temperature regulation in different areas of your home. The indoor units draw power from the outdoor condenser, eliminating the need for additional circuits unless you choose to install optional electric backup heat. These air handlers are particularly suitable for homes that have existing ductwork in some areas but lack it in others, such as finished basements, attics, or additions.
Features
- 18,000 BTU, 1.5 Ton central ducted air handler
- Matches with Multi Zone and Platinum Single Zone condensers
- Can be used as part of a Multi Zone system with other air handlers
- Variable DC blower
- Upflow, downflow, horizontal left or right
- Manufactured home and mobile home approved
- Wired controller included, with remote control for setup
- Can be wired to 24V thermostats - see Quick Start Guide below
- Wifi compatible with optional KJR-120N controller
What's Included:
- 1x 36,000 BTU ACiQ Multi Zone Condenser w/ Extreme Heat
- 2x 9,000 BTU ACiQ Platinum Multi Zone Air Handler w/ WiFi
- 1x 18,000 BTU ACiQ Multi Zone Ducted Air Handler
Condenser Specifications:
| Manufacture | ACiQ |
| SKU | ACiQ-36Z-HH-M4B |
| Refrigerant Charge |
100' |
| Weight |
255.070000 |
| AHRI Certificate Number |
207825582 |
| HSPF | 10.5 |
| Cooling BTU | 36000 BTU |
| Heating BTU | 36000 BTU |
| Decibel Level (dBA) | 64 |
| Electric Heat | Heat Pump |
| Energy Star | Yes |
| Refrigerant | R410A |
| SEER | 21-22 |
| SEER2 | 22.2 |
| EER | 13.5 |
| Compressor Type | Rotary |
| Liquid Line | 1/4" (4) |
| Suction Line |
3/8" (3); 1/2" (1) |
| Electrical | 208/230V 1 Phase 60 Hz |
| Max Breaker Size |
60 Amps |
| Min. Breaker Size |
40 Amps |
| Tonnage |
3 Ton |
| BTU/Tonnage | 36,000 BTU/3 Ton |
| Mini-Split Type | Wall Mounted |
| Zone Compatibility | Multi Zone |
| Ambient Temperature Range | -22 ~ 122 |
| Height |
52-1/2" |
| Width |
37-1/2" |
| Depth |
16-2/5" |
| Warranty | 12 year compressor, 7 year parts with online registration |
| Resources | |
| Safety Information | Proposition 65 Warning |
9K Air Handler Specifications:
| Manufacturer | ACiQ |
| SKU | ACiQ-09W-HH-MC |
| Weight | 22.700000 |
| Cooling BTU | 9000 BTU |
| Heating BTU | 10000 BTU |
| Maximum CFM | 247 |
| Decibel Level (dBA) | 38 |
| Electric Heat | Heat Pump |
| Refrigerant | R410A |
| SEER | 23-24 |
| SEER2 | 22.3 |
| Liquid Line | 1/4" |
| Suction Line | 3/8" |
| Electrical | 208/230V 1 Phase 60 Hz |
| BTU/Tonnage | 9,000 BTU/0.75 Ton |
| Mini-Split Type | Wall Mounted |
| Zone Compatibility | Multi Zone |
| Height | 11-4/5" |
| Width | 33-2/5" |
| Depth | 9-1/5" |
| Warranty | 12 year compressor, 7 year parts with online registration |
| Resources | |
| Safety Information | Proposition 65 Warning |
18K Air Handler Specifications:
| Manufacturer | ACIQ |
| SKU |
ACIQ-18AHB-HH-M |
| Refrigerant Charge | 25' |
| Weight | 127.210000 |
| HSPF2 | 9.6 |
| Cooling BTU | 18000 BTU |
| Heating BTU | 18000 BTU |
| Maximum CFM | 617 |
| Decibel Level (dBA) | 39 |
| Electric Heat | Heat Pump |
| Electric Backup Heat Capabilities (Optional) | 5 Kilowatts, 10 Kilowatts |
| Energy Star | Yes |
| Refrigerant | R410A |
| SEER2 | 17.5 |
| Liquid Line | 1/4" |
| Suction Line | 1/2" |
| Electrical | 208/230V 1 Phase 60 Hz |
| Max Breaker Size | 25 |
| Min. Breaker Size | 20 |
| Tonnage | 1.5 Ton |
| Tonnage Bundle | 1.5 Ton |
| BTU/Tonnage | 18,000 BTU/1.5 Ton |
| Mini-Split Type | Multi-Positional |
| Zone Compatibility | Single Zone |
| Height | 45" |
| Width |
21.02" |
| Depth | 17.52" |
| Warranty | 12 year compressor, 7 year parts with online registration |
| Resources | |
| Safety Information | Proposition 65 Warning |
Size your System
Beginner’s Guide to Choosing the Right Size BTU HVAC System
If you’re new to HVAC (Heating, Ventilation, and Air Conditioning) systems, selecting the right size BTU (British Thermal Unit) system can seem daunting. This guide will break down the process into simple steps.
1. What is BTU?
- Definition: BTU measures the amount of energy needed to heat or cool a space. More BTUs mean more heating or cooling power.
2. Why Size Matters
- An undersized system will struggle to heat or cool your home, leading to discomfort.
- An oversized system will cycle on and off too frequently, wasting energy and causing wear and tear.
3. Measure Your Space
-
Find Your Square Footage:
- Measure the length and width of each room.
- Multiply the length by the width for each room, then add them up for the total square footage.
-
Example:
- Living Room: 15 ft x 20 ft = 300 sq. ft.
- Bedroom: 10 ft x 12 ft = 120 sq. ft.
- Total = 300 + 120 = 420 sq. ft.
4. General BTU Guidelines
- A rough estimate is 20 BTUs per square foot.
- Example: For 420 sq. ft.: 420 sq. ft. × 20 BTUs/sq. ft. = 8,400 BTUs
5. Adjusting BTU Calculations Based on Specific Factors
When determining the right BTU size for your HVAC system, it's important to consider various factors that can affect your heating and cooling needs. Here’s a more detailed breakdown:
- Ceiling Height
- Standard Ceiling (8 feet): The basic BTU calculation (20 BTUs per square foot) works well.
-
Higher Ceilings: For ceilings taller than 8 feet, you’ll need to increase the BTU calculation. A common rule of thumb is to add about 10% for each additional foot of height.
-
Example: If you have a 10-foot ceiling in a 400 sq. ft. room:
- Base BTUs:
- Increase for height:
- Total BTUs Needed:
-
Example: If you have a 10-foot ceiling in a 400 sq. ft. room:
- Insulation Quality
- Well-Insulated Homes: If your home has good insulation, you can stick with the basic BTU calculation.
- Average Insulation: If your home has average insulation, consider adding 10% to your BTU needs.
-
Poor Insulation: For homes with poor insulation, you may need to add 20% or more. Check for drafts, gaps, or insufficient insulation in walls and attics.
-
Example: If your calculated BTUs are 10,000 and you have poor insulation:
- Increase by 20%:
- Total BTUs Needed:
-
Example: If your calculated BTUs are 10,000 and you have poor insulation:
- Windows
- Standard Windows: If you have standard double-pane windows, the basic BTU estimate should suffice.
-
Large or Single-Pane Windows: If you have large windows or single-pane windows (which are less efficient), add extra BTUs:
- For each large window, add 500-1,000 BTUs.
- For single-pane windows, consider adding 10-20% to your BTU needs.
-
Example: If your home requires 10,000 BTUs and you have two large windows:
- Add 1,000 BTUs per window:
- Total BTUs Needed:
- Climate Zone
- Hot Climates: If you live in a region with extreme heat, consider increasing your BTUs by 10-20%.
- Cold Climates: In very cold areas, you might also need to add 10-20% for heating.
-
Mild Climates: For areas with mild weather, the basic calculation should suffice.
-
Example: If your calculated BTUs are 10,000 and you live in a hot climate:
- Increase by 15%:
- Total BTUs Needed:
-
Example: If your calculated BTUs are 10,000 and you live in a hot climate:
- Occupancy
- General Rule: Each additional person beyond the first two generates about 600 BTUs of heat.
-
Frequent Guests or Large Families: If you regularly have guests or a large family, factor in the additional heat.
-
Example: If your home is sized for 10,000 BTUs and you expect 4 additional occupants:
- Add BTUs.
- Total BTUs Needed:
-
Example: If your home is sized for 10,000 BTUs and you expect 4 additional occupants:
6. Consult Professionals
- It’s a good idea to consult an HVAC professional for an accurate assessment. They can perform a detailed analysis (often called a Manual J calculation) to determine the exact BTUs needed based on your home’s specifics.
We've also left a chart below to help you determine the right size BTU for your home or business using the above guide.
| Square Footage | BTU Capacity |
|---|---|
| How many BTUs for 100 square feet? | 2,000 BTU |
| How many BTUs for 200 square feet? | 4,000 BTU |
| How many BTUs for 300 square feet? | 6,000 BTU |
| How many BTUs for 400 square feet? | 8,000 BTU |
| How many BTUs for 500 square feet? | 10,000 BTU |
| How many BTUs for 600 square feet? | 12,000 BTU |
| How many BTUs for 700 square feet? | 14,000 BTU |
| How many BTUs for 800 square feet? | 16,000 BTU |
| How many BTUs for 900 square feet? | 18,000 BTU |
| How many BTUs for 1000 square feet? | 20,000 BTU |
| How many BTUs for 1100 square feet? | 22,000 BTU |
| How many BTUs for 1200 square feet? | 24,000 BTU |
| How many BTUs for 1300 square feet? | 26,000 BTU |
| How many BTUs for 1400 square feet? | 28,000 BTU |
| How many BTUs for 1500 square feet? | 30,000 BTU |
| How many BTUs for 1600 square feet? | 32,000 BTU |
| How many BTUs for 1700 square feet? | 34,000 BTU |
| How many BTUs for 1800 square feet? | 36,000 BTU |
| How many BTUs for 1900 square feet? | 38,000 BTU |
| How many BTUs for 2000 square feet? | 40,000 BTU |
| How many BTUs for 2500 square feet? | 50,000 BTU |
| How many BTUs for 3000 square feet? | 60,000 BTU |
Shipping Policy
Thank you for visiting and shopping at Mini Split Systems Direct. Following are the terms and conditions that constitute our Shipping Policy.
Domestic Shipping Policy
Shipment processing time
All orders made before 2:00 PM EST are processed within 2-3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping rates & delivery estimates
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States. We do not currently ship to international locations.
| Destination | Shipping method | Processing Time | Estimated Delivery Time | Shipment cost |
| United States | Free Shipping |
2 - 3 business days | 3 - 7 days | Free |
Delivery delays can occasionally occur.
Shipment confirmation & Order tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Customs, Duties and Taxes
Mini Split Systems Direct is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Damages & Missing Items
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Pre-Orders, Backorders, and Out-of-Stock Items:
Mini Split Systems Direct is dedicated to sourcing any item you may need and getting it to you as quickly as possible. Any items that are out of stock, or available for Pre-Order will be noted on the product page. You are welcome to place an order for Pre-Order items, backorder items, and for items that are out of stock, and will ship them the second they become available from the manufacturer, ensuring you get the item before anyone else. If you have questions about lead times, please refer to the product page or contact us at info@minisplitsystemsdirect.com or give a call or text at 1-800-315-4345
Return and Refund Policy
Returns
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted.
You can always contact us for any return questions at info@minisplitsystemsdirect.com, or call us at 1-800-315-4345.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. A 15% restocking fee and the cost of return shipping will be deducted from the refund. Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
Cancellations
All orders canceled after 24 hours are subject to a 5% administration fee, If your order has not been shipped yet, this is the only fee you will incur. This is a fee that covers administrative and personnel fees.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order.
Damages and issues
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Exchanges
The fastest way to ensure you get what you want is to return the item you have (see return process above), and once the return is accepted, make a separate purchase for the new item.
Price Match Policy
Our goal is to consistently provide the best pricing in the marketplace online and we work very diligently to do so. If you happen to see another online shop that offers a lower price than us within six months of your date please let us know and we’ll be happy to refund the difference on your original payment method. Moreover, because we are consistently working with our suppliers to get better rates we know that you can feel very comfortable and confident that you are seeing the best prices that can be provided for the products listed on our site.
Moving forward if you find the same item that we carry on another website that has a lower price please submit that to us within six months of your purchase date and we will refund you the difference.
If it is a case of seeing a lower price on another website and we need to send a partial refund simply email us the link to the exact product and brand from our site and also the link from our competitors site so we can inspect the pricing. Again this needs to be within six months from the date of your order and we will review your submission and apply a credit if necessary.
Our Price Match Policy has some limitations:
- The item must have already been purchased from our site prior to asking for this to be reviewed and submitted.
- This does not include rebate programs or specific retailer programs such as buy three get one free type offers or any combination such as that are not eligible.
- The item will need to be in stock from the competitors site that you’re submitting the information from.
- The competitor must be an online store, they may not have a retail location, warehouse, showroom, or physical location.
- The website cannot be a wholesaler, liquidator, distributor, or auction website. Examples are eBay, Liquadation.com, Via Trading, Overstock, Wayfair, Amazon, Home Depot, Lowes, etc.
- The competitor must also be someone who has been authorized by the supplier and/or manufacturer to resell the product you are inquiring about.
- The price match will include the product listing price, but will exclude any sales tax.
FAQ
Can I add a discount code to my order post-purchase?
Unfortunately were unable to add a discount code to your order after you've checked out, but, were happy to provide you with discount for your next purchase.
Can I add items to my order?
Yes, please contact us a soon as possible if you need to make changes to your order and will send an invoice for the remaining amount due. Please note this may result in you receiving your order in multiple packages, and yes, you will receive a tracking number for each package.
Can I change or modify my order?
Yes, you can change or modify your order within the first 24 hours after placing your order, after that, it will depend on the status of your order. If you need to change or modify your order, please contact us as soon as possible at info@minisplitsystemsdirect.com. If your order has already been processed and shipped, then we may be unable to change or modify your order.
Can I place my order to be delivered outside the United States?
At this time we do not ship internationally, but please contact us we may be able to accommodate you.
How can I remove items from my order?
If you need to remove items from your order, please contact us at info@minisplitsystemsdirect.com within the first 24 hours after you placed your order. After 24 hours, you are subject to a 5% fee for the item that is cancelled to cover incurred credit card processing fees. If your order has not been shipped yet, this is the only fee you will incur.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order. For more information, please see our return & refund policy here.
Do all the products you carry come with a warranty?
Yes, every product we carry includes a manufacturer warranty. If you need help with a warranty claim, please contact us at info@minisplitsystemsdirect.com and will help you resolve any issues you are experiencing with your product.
Do you have a storefront?
At this time we do not have a storefront, we're an online only Authorized Dealer for all the brand we carry. We do have plans to open a storefront in the future.
How do I check the status of my order?
After placing your order you'll receive a confirmation email, and after a Shipment Confirmation email once your order has shipped which will contain your tracking number(s). The tracking number will be active within 24 hours. If you have any other questions regarding the status of your order please contact us at info@minisplitsystemsdirect.com or message us by live chat.
How long is shipping and delivery?
All orders made before 2:00 PM EST are processed within 2 - 3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day. Estimated delivery time is 3 - 7 days.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Who do you ship with?
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States.
How long will it take to receive my refund?
Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
What is your return policy?
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted. Please see our full return & refund policy here.
What forms of payment do you accept?
We accept all credit cards, PayPal, Apple Pay, and you can pay in installments with Sezzle at checkout.
What should I do if my order is damaged or I'm missing items?
Please contact us within 48 hours of receiving your order at info@minisplitsystemsdirect.com and we'll resolve the issue ASAP.
What should I do if my order was marked as delivered but I haven't received it?
Although we cannot control what happens once your order leaves the warehouse and is in the hands of the shipping carrier, we will do everything we can to make sure you receive your order. If you have not received your order, please contact us at info@minisplitsystemsdirect.com with your order number, and provide us with any details that may help and rest assured, we will resolve the issue.
I’m having trouble tracking my order. What should I do?
If your order has just been shipped, please wait 24 hours for your tracking number to be updated properly with your latest tracking information. If after 24 hours your tracking information is not populating, please contact us at info@minisplitsystemsdirect.com and we will be more than happy to assist you.
12,000 BTU 25 SEER ACiQ Platinum Single Zone Slim Ceiling Cassette Mini Split System w/ Extreme Heat
Line Set Length
12,000 BTU 25.5 SEER ACiQ Platinum Single Zone Ceiling Cassette Mini Split System w/ Extreme Heat
Installation Kit Options
12,000 BTU 25.5 SEER ACiQ Platinum Single Zone Wall Mount Mini Split System - Extreme Heat - WiFi Enabled
Installation Kit Options
12,000 BTU 25.5 SEER2 ACiQ Platinum Single Zone Floor Mount Mini Split System w/ Extreme Heat
Installation Kit Options
18,000 BTU 21.5 SEER2 ACiQ Platinum Single Zone Ceiling Cassette Mini Split System w/ Extreme Heat
Installation Kit Options
18,000 BTU 22 SEER2 ACiQ 2-Zone Wall Mounted Mini Split System - Extreme Heat - WiFi Enabled - 9K + 9K
Line Set Length for 9K Air Handler #1/Line Set Length for 9K Air Handler #2
18,000 BTU 22.9 SEER2 ACiQ 2-Zone Wall Mounted Mini Split System w/ WiFi - 9K + 9K
Lineset Length for 9K Air Handler #1/Lineset Length for 9K Air Handler #2
18,000 BTU 25 SEER ACiQ Platinum Single Zone Slim Ceiling Cassette Mini Split System w/ Extreme Heat
Line Set Length
12,000 BTU 25 SEER ACiQ Platinum Single Zone Slim Ceiling Cassette Mini Split System w/ Extreme Heat
Line Set Length
12,000 BTU 25.5 SEER ACiQ Platinum Single Zone Ceiling Cassette Mini Split System w/ Extreme Heat
Installation Kit Options
12,000 BTU 25.5 SEER ACiQ Platinum Single Zone Wall Mount Mini Split System - Extreme Heat - WiFi Enabled
Installation Kit Options
12,000 BTU 25.5 SEER2 ACiQ Platinum Single Zone Floor Mount Mini Split System w/ Extreme Heat
Installation Kit Options
18,000 BTU 21.5 SEER2 ACiQ Platinum Single Zone Ceiling Cassette Mini Split System w/ Extreme Heat
Installation Kit Options
18,000 BTU 22 SEER2 ACiQ 2-Zone Wall Mounted Mini Split System - Extreme Heat - WiFi Enabled - 9K + 9K
Line Set Length for 9K Air Handler #1/Line Set Length for 9K Air Handler #2
18,000 BTU 22.9 SEER2 ACiQ 2-Zone Wall Mounted Mini Split System w/ WiFi - 9K + 9K
Lineset Length for 9K Air Handler #1/Lineset Length for 9K Air Handler #2
18,000 BTU 25 SEER ACiQ Platinum Single Zone Slim Ceiling Cassette Mini Split System w/ Extreme Heat
Line Set Length
12,000 BTU 25 SEER ACiQ Platinum Single Zone Slim Ceiling Cassette Mini Split System w/ Extreme Heat
Line Set Length
12,000 BTU 25.5 SEER ACiQ Platinum Single Zone Ceiling Cassette Mini Split System w/ Extreme Heat
Installation Kit Options
12,000 BTU 25.5 SEER ACiQ Platinum Single Zone Wall Mount Mini Split System - Extreme Heat - WiFi Enabled
Installation Kit Options
12,000 BTU 25.5 SEER2 ACiQ Platinum Single Zone Floor Mount Mini Split System w/ Extreme Heat
Installation Kit Options
18,000 BTU 21.5 SEER2 ACiQ Platinum Single Zone Ceiling Cassette Mini Split System w/ Extreme Heat
Installation Kit Options
18,000 BTU 22 SEER2 ACiQ 2-Zone Wall Mounted Mini Split System - Extreme Heat - WiFi Enabled - 9K + 9K
Line Set Length for 9K Air Handler #1/Line Set Length for 9K Air Handler #2
18,000 BTU 22.9 SEER2 ACiQ 2-Zone Wall Mounted Mini Split System w/ WiFi - 9K + 9K
Lineset Length for 9K Air Handler #1/Lineset Length for 9K Air Handler #2
18,000 BTU 25 SEER ACiQ Platinum Single Zone Slim Ceiling Cassette Mini Split System w/ Extreme Heat
Line Set Length
Related Products
Let customers speak for us
Very well thought out product. I turned this from an upflow unit to a downflow with a 10kw heat strip. The air handler unit was a perfect fit from my old one (35 year old Lennox) so I didn’t have to do any sheet metal work which was nice. I used the 25 ft diy lineset which I was impressed with the no kink lineset. Made it much easier to make bends without kinking. Hooking up the lineset to the A coil and condenser was a breeze. I was impressed with the design, they put a lot of work into making this an install friendly unit. Their technical support was very knowledgeable. I’ve only been able to run the heat pump, the unit has very good air flow. If they were a little bit cheaper on their gas furnace units I would start putting these in my rentals.
I was pleased to find this kit for my heat pump replacement project. I’ve never done any ductwork, so was reluctant, but was pleasantly amazed at the finished job using this kit. The secret is to first do layout drawings for what you need, then factor in the overlaps, and then double check before you start cutting.
Order came very quick, 3 day and damage free. I installed the unit and it’s working great.
Four years ago I paid $12,000 to replace my AC central unit for my home 8100 ft.² , the unit doesn’t work in every room so I decided to buy eight Mr. cool units and place them around my home. My home has never been so comfortable, cool in the summer and warm in the winter and I live in Utah and it gets below 28° and Mr. cool still warms the rooms that I needs. Thousand percent satisfied
Efficient, quiet, wifi controls, what’s not to like
Very nice product made life a lot better
Efficient, quiet, wifi controls, what’s not to like
This unit surpassed every expectation I had. I researched mini splits for a year. (Barn rehab) I talked to people that have them and read a ton of reviews. I was told it is all about customer service. I got someone on the phone while my heating and cooling guy was standing right there.☆☆☆☆☆!! Then he made the simple connections and turned it on. I am in complete awe. Within 5 minutes the area was warming. I bought 24,000 btu for my 1000sqft area and it is outstanding. Now I will wait to see how efficient it is on electric. Fingers crossed. I would highly recommend this unit!!
Purchased 24KBtu unit for a 14x65 2Br Mobile Home. Relatively straightforward installation, but not for everyone. I made a dumb mistake in wiring between the indoor unit and outdoor, resulting in an error, so I called Mini Split Systems Direct up and we got it resolved. Purchased a vacuum pump, gauges, and line set covers from Mini Split Systems Direct to complete the project.
It has worked great since I rectified my wiring mistake. It's only been in heat mode (Jan in NC), and generates impressive heat and airflow at next to zero noise. The condenser unit outside is also very quiet. Time will tell on the reliability and efficiency, but everything I've seen thus far makes me optimistic.
Pretty quiet and compact unit, managed to DIY install 3 ton myself including ductwork, custom plenums and new electrical / drainage / thermostat wiring in 3 full weekends. Quick connect lineset made this possible (no vacuum or soldering needed!) Seems to be pretty efficient so far (northern california climate)
I take pride in my work and feel confident that my install was done better then hiring an HVAC company. I know many in that profession get their feelings hurt when you bring up doing it yourself. Was quoted $9k for system replacement and I was able to do for less than $4k. This is not for your average DYI person as custom duct work and electrical upgrades will likely be needed. I had about 31 hours into this replacement. That includes tarring out, pouring concrete pad, custom duct work, electrical upgrades, and system calibration. If your line set length is going to be close I recommend going up a size. I had planned to have about 6ft extra but due to line hookup locations I had just the right amount.
I had to call Mini Split Systems Direct support to ask about my thermostat compatibility and they were helpful.
I'm very happy with the results of this unit. The ac works amazingly well compared to the older carrier air conditioner. The lines were very hard to bend without damage and I would suggest have a line-set with elbows where needed installed. The unit is very quiet and worked with my Nest Thermostat.
The item was shipped quickly and arrived ahead of schedule. Unfortunately, after unpacking I noticed some damage on the outdoor condensing unit. This was a little concerning because I had to install it pretty quickly in order to get the air back on. I contacted. Mini Split Systems Direct and they got back with me within a few hours. I sent them some photos and a description and they took care of it immediately. The new part was shipped free of charge and arrived. Just a couple of days later.
Everything has been installed and working perfectly, I’m very pleased with both the product and Mini Split Systems Direct for fixing an issue that they may not have even created. so often you have people passing the buck, but they took care of me and I thank them for that. I would not hesitate to order from them again.
As for the Mr. cool unit and line set, it did take two people to install it and a little bit of troubleshooting with the thermostat, but it is working perfectly now for the last couple of weeks even in quite hot weather. The inside unit is extremely quiet, I used it to replace an old air conditioner which was much louder.
Time will tell if the annual energy consumption/cost goes down and how long it will last, but the workmanship seems to be very high-quality.
I've done AC work in the past but not at this level. This DIY kit made it easier as the lines were already charged, and no vacuum needed. My challenge was removing an old 3-ton Rheem propane gas-pack (see pic) which was R-22 and installed in the mid 80's in my 1792 farmhouse.
It took weeks to complete because of the ductwork that needed to be removed from the crawlspace and I had to fabricate ductwork including the air handler now located in the house (see pic).
I waited right before summer to do this job and have lots of pics and info on the Levi Creecy website.
living in NC our winters are not terrible, so I did not buy the heat pump model and opted for the heat kit.
My old unit was 3 tons and ran on a 50 amp breaker, now runs on a 35 amp, This Mr. Cool is very quite in comparison, AC Outputs are very impressive. Yes, my electric bill went down this summer.
My SENSI smart thermostat had to be rewired and reprogramed however I'm not missing any functions/features.
Using this guy to exhaust a laser engraver. It's got a quiet turn and can really move a bunch of air. So far it's been great.
What customers think about the store
Customers generally had positive experiences with this store, praising the quality of products, reasonable prices, efficient delivery, and helpful customer service. Many found the systems easy to install themselves with the guidance provided, though some prefe...