Goodman 2.5 Ton Cooling / 80,000 BTU Heating 81% AFUE 14.6 SEER2 2-Stage Gas/Electric Package Unit - GPGM53008041
The Goodman 3 Ton Cooling / 80,000 BTU Heating 81% AFUE 15.2 SEER2 2-Stage Gas/Electric Package Unit - GPGM53608041 utilizes a reliable Direct-Spark Ignition System and integrated controls with on-board diagnostics, plus a combination redundant gas valve and regulator for further safety and reliability. The Goodman 3 Ton Cooling / 80,000 BTU Heating 81% AFUE 15.2 SEER2 2-Stage Gas/Electric Package Unit - GPGM53608041 also boasts a high-performance, energy-efficient compressor, which operates in tandem with our high-efficiency coil. The coil is made of refrigeration-grade copper tubing and aluminum fins in a design that maximizes surface area. These high-quality components together cool your home effectively while saving you money on your energy bills as compared to lower SEER units.
Standard Features:
- Durable, corrosion-resistant T-140 aluminized steel tubular heat exchanger
- High-efficiency two-stage scroll compressor
- Convertible airflow: horizontal or downflow application
- Variable-speed ECM indoor blower motor
- Copper tube/aluminum fin condenser coil
- All-aluminum evaporator coil on 2- to 4-ton units
- Aluminum-copper evaporator coil on 5-ton units
- Power-assisted combustion
- Loss-of-charge protection & high-pressure switch
- Two-stage gas valve; natural gas with easy conversion to propane with accessory kit
- Direct spark ignition system includes a microprocessor-based control for the entire ignition sequence
- All blower operation and all safety circuits complete with self-diagnostics
- All models comply with California Low NOx emission standards (40ng/J NOx)
- This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD)
- AHRI Certified; ETL Listed
Cabinet Features:
- Fully insulated heavy-gauge, zinc-coated steel cabinet with UV-resistant powder-paint finish
- Aluminum foil-facing internal insulation reinforced with fiberglass scrim
- Convenient access panels
- One roof curb fits 2-4 ton units
- Bottom, 2” high base rails for easier handling
- 2-4 ton models fit a standard-size pick-up truck
- When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
- Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
Specifications:
| Brand | Goodman |
| Model | GPGM53608041 |
| Warranty |
10 Year Parts Warranty with online registration 10 Year Compressor Warranty with online registration 20 Year Heat Exchanger Warranty with online registration |
| Refrigerant | R-410A |
| Configuration | Downflow / Horizontal |
| Energy Star Certified | No |
| Cooling Capacity |
Total BTU/h: 35,000 Sensible BTU/h: 28,700 SEER2 / EER2: 15.2 / 11.2 Decibels: 79 AHRI Number: 209319563 |
| Heating Capacity (BTU/H) |
High-Fire Input / Output: 80,000 / 64,800 Low-Fire Input / Output: 60,000 / 48,600 AFUE: 81 High/Low Temperature Rise Range: 35 - 65/35-65 No. of Burners: 4 |
| Evaporator Motor |
Type: ECM Wheel (D x W): 11” x 10” Indoor Nominal CFM: 1,200 No. of Speeds: 5 Horsepower: 3/4 |
| Evaporator Coil |
Face Area (ft²): 5.7 Rows Deep/Fins per Inch: 4 / 14 Piston Size (Cooling): TXV Filter Size (ft²): (1)25X25X1 Drain Size (NPT): 3/4" Refrigerant Charge (oz.): 114 |
| Condenser Fan/Coil |
Horsepower - RPM: 1/4 - 1075 Diameter / # of Blades: 22” / 3 Outdoor Nominal CFM: 3,100 Face Area (ft²): 14.4 Rows Deep/Fins per Inch: 2 / 27 |
| Compressor |
Quantity / Type / Stage: 1 / Scroll / 2 Compressor RLA/LRA: 14.1 / 84.2 |
| Electrical Data |
Voltage-Phase (Frequency 60Hz): 208/230-1 Indoor Blower FLA/LRA: 6.8 Outdoor Fan FLA/LRA: 1.4 / 3.2 Min. Circuit Ampacity: 25.8 Max. Overcurrent Protection: 35 amps |
| Operating / Ship Weights (lbs) | 490 / 500 |
| Dimensions (W x D x H) | 47 x 51 x 42-1/2 inches |
| Duct Openings Dimensions |
Supply (W x H): 16 x 18 inches Return (W x H): 16 x 18 inches |
Product Information and Guides:
Let customers speak for us
What customers think about the store
Mini Split Systems Direct offers HVAC equipment with fast shipping, competitive pricing, and responsive customer service. Customers appreciate product quality, ease of installation, efficient delivery, and helpful technical support. The store provides complete...