1-800-315-4345
1.5 Ton 15.2 SEER2 R32 Heat Pump Split System - Multi-Positional
The ACiQ Heat Pump Split System is a great choice to keep your home comfortable all season long. With tons of extra features and a great price, the ACiQ Heat Pump Split System is a perfect choice for all of your heating and cooling needs.
Product Features
- Complete all-electric heating and cooling system
- Pre-charged with R32 refrigerant
- Can be installed in upflow, downflow, or horizontal applications
- Well-suited for small homes in various climates
1.5 Ton 14.3 SEER2 Single Stage Heat Pump Condenser - R32
Overview
The ACiQ AQ-GLZS4BA1810 heat pump condenser is a standard efficiency, low-cost solution for an all-electric home when paired with a suitable heat pump coil or air handler. Just like all of ACiQ's equipment, the AQ-GLZS4BA1810 is manufactured with high-quality materials to provide a superior comfort in your home.
Utilizing advanced technology, the ACiQ heat pump condenser efficiently transfers heat between the indoors and outdoors, providing both heating and cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.
Quick Facts
- Ideal size to cover a smaller house in ideal climates
- 1.5 ton, 14.3 SEER2 heat pump condenser
- R32: Complies with Clean Air Act New Refrigerant Requirements
- Low sound output
- Fully charged for up to 15' of line set
- Factory-installed bi-flow filter drier
1.5 Ton
The ACiQ AQ-GLZS4BA1810 heat pump has a capacity of 1.5 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
14.3 SEER2
At 14.3 SEER2, the AQ-GLZS4BA1810 heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
Warranty
The AQ-GLZS4BA1810 condenser comes with ACiQ's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The ACiQ AQ-GLZS4BA1810 heat pump condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
Installation and Maintenance
The ACiQ AQ-GLZS4BA1810 has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
Comfort in Mind
With its sound control top insulation and SmartShift technology for quiet and reliable defrost cycles, the AQ-GLZS4BA1810 heat pump has some of the lowest sound outputs on a single stage unit on the market today.
Disclaimer: This condenser contains R32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty.
2 Ton Multi-Positional Air Handler - R32
Overview
The ACiQ AQ-AMST24BU1300 air handler is designed with an energy-saving, direct drive ECM blower motor and durable cabinet with multiple features that provide an easy installation. With this model, ACiQ upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.
Quick Facts
- 2 ton air handler
- Electric heat compatible
- Optimized for use with R32 refrigerant
- Multi-speed, direct drive ECM blower motor
- Multi-positional (upflow, downflow, or horizontal)
2 Tons
The ACiQ AQ-AMST24BU1300 air handler is rated for an output of 2 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.
Warranty
The AQ-AMST24BU1300 comes with ACiQ standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.
Durability and Reliability
With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the ACiQ AQ-AMST24BU1300 air handler is durable in design, making it a reliable solution for your home.
Installation and Maintenance
The ACiQ AQ-AMST24BU1300 utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there are two panels on the front to access vital areas on the air handler.
Enhanced Comfort
The AQ-AMST24BU1300 air handler lives up to ACiQ comfort expectations with its multi-speed ECM motor, which provides a more precise and efficient temperature control.
Condenser Specifications:
| SKU | AQ-GLZS4BA1810 |
| Weight | 165.000000 |
| Manufacturer | Private Brand |
| Replaces | GSZ140181, GSZ140191, GSZB401810 |
| Product Features | New Refrigerant Compliant |
| HSPF2 | 7.8 |
| Cooling BTU | 18,000 |
| Heating BTU | 18,000 |
| Decibel Level (dBA) | 74 |
| Horsepower | 1/6 HP |
| Refrigerant | R32 |
| SEER2 | 14.3 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208/230v 1 Phase 60 Hz |
| Max Breaker Size | 15 Amps |
| Min. Breaker Size | 11.2 Amps |
| Tonnage | 1.5 Ton |
| Connection | Sweat |
| Height | 32 1/2" |
| Width | 29" |
| Depth | 29" |
| Warranty | 10 Years Parts Limited Warranty with Online Registration |
| Resources | |
| Safety Information | PROPOSITION 65 WARNING |
Air Handler Specifications:
| SKU | AQ-AMST24BU1300 |
| Weight | 112.000000 |
| Manufacturer | Private Brand |
| Product Features | New Refrigerant Compliant |
| Blower Motor | Multi-Speed Direct Drive ECM Motor |
| Maximum CFM | 1215 |
| Horsepower | 0.75 HP |
| Electric Backup Heat Capabilities (Optional) | 3 Kilowatts, 5 Kilowatts, 8 Kilowatts, 10 Kilowatts, 15 Kilowatts |
| Refrigerant | R32 |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208/240v 1 Phase 60Hz |
| Max Breaker Size | 15 Amps |
| Min. Breaker Size | 5.8 Amps |
| Tonnage | 2 Ton |
| Connection | 3/4" FPT |
| Height | 45" |
| Width | 17 9/16" |
| Depth | 21" |
| Warranty | 10 Years Parts with Online Registration |
| Resources | |
| Safety Information | PROPOSITION 65 WARNING |
Thank you for visiting and shopping at Mini Split Systems Direct. Following are the terms and conditions that constitute our Shipping Policy.
Domestic Shipping Policy
Shipment processing time
All orders made before 2:00 PM EST are processed within 2-3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping rates & delivery estimates
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States. We do not currently ship to international locations.
| Destination | Shipping method | Processing Time | Estimated Delivery Time | Shipment cost |
| United States | Free Shipping |
2 - 3 business days | 3 - 7 days | Free |
Delivery delays can occasionally occur.
Shipment confirmation & Order tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Customs, Duties and Taxes
Mini Split Systems Direct is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Damages & Missing Items
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Pre-Orders, Backorders, and Out-of-Stock Items:
Mini Split Systems Direct is dedicated to sourcing any item you may need and getting it to you as quickly as possible. Any items that are out of stock, or available for Pre-Order will be noted on the product page. You are welcome to place an order for Pre-Order items, backorder items, and for items that are out of stock, and will ship them the second they become available from the manufacturer, ensuring you get the item before anyone else. If you have questions about lead times, please refer to the product page or contact us at info@minisplitsystemsdirect.com or give a call or text at 1-800-315-4345
Returns
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted.
You can always contact us for any return questions at info@minisplitsystemsdirect.com, or call us at 1-800-315-4345.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. A 15% restocking fee and the cost of return shipping will be deducted from the refund. Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
Cancellations
All orders canceled after 24 hours are subject to a 5% administration fee, If your order has not been shipped yet, this is the only fee you will incur. This is a fee that covers administrative and personnel fees.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order.
Damages and issues
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Exchanges
The fastest way to ensure you get what you want is to return the item you have (see return process above), and once the return is accepted, make a separate purchase for the new item.
Our goal is to consistently provide the best pricing in the marketplace online and we work very diligently to do so. If you happen to see another online shop that offers a lower price than us within six months of your date please let us know and we’ll be happy to refund the difference on your original payment method. Moreover, because we are consistently working with our suppliers to get better rates we know that you can feel very comfortable and confident that you are seeing the best prices that can be provided for the products listed on our site.
Moving forward if you find the same item that we carry on another website that has a lower price please submit that to us within six months of your purchase date and we will refund you the difference.
If it is a case of seeing a lower price on another website and we need to send a partial refund simply email us the link to the exact product and brand from our site and also the link from our competitors site so we can inspect the pricing. Again this needs to be within six months from the date of your order and we will review your submission and apply a credit if necessary.
Our Price Match Policy has some limitations:
- The item must have already been purchased from our site prior to asking for this to be reviewed and submitted.
- This does not include rebate programs or specific retailer programs such as buy three get one free type offers or any combination such as that are not eligible.
- The item will need to be in stock from the competitors site that you’re submitting the information from.
- The competitor must be an online store, they may not have a retail location, warehouse, showroom, or physical location.
- The website cannot be a wholesaler, liquidator, distributor, or auction website. Examples are eBay, Liquadation.com, Via Trading, Overstock, Wayfair, Amazon, Home Depot, Lowes, etc.
- The competitor must also be someone who has been authorized by the supplier and/or manufacturer to resell the product you are inquiring about.
- The price match will include the product listing price, but will exclude any sales tax.
Can I add a discount code to my order post-purchase?
Unfortunately were unable to add a discount code to your order after you've checked out, but, were happy to provide you with discount for your next purchase.
Can I add items to my order?
Yes, please contact us a soon as possible if you need to make changes to your order and will send an invoice for the remaining amount due. Please note this may result in you receiving your order in multiple packages, and yes, you will receive a tracking number for each package.
Can I change or modify my order?
Yes, you can change or modify your order within the first 24 hours after placing your order, after that, it will depend on the status of your order. If you need to change or modify your order, please contact us as soon as possible at info@minisplitsystemsdirect.com. If your order has already been processed and shipped, then we may be unable to change or modify your order.
Can I place my order to be delivered outside the United States?
At this time we do not ship internationally, but please contact us we may be able to accommodate you.
How can I remove items from my order?
If you need to remove items from your order, please contact us at info@minisplitsystemsdirect.com within the first 24 hours after you placed your order. After 24 hours, you are subject to a 5% fee for the item that is cancelled to cover incurred credit card processing fees. If your order has not been shipped yet, this is the only fee you will incur.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order. For more information, please see our return & refund policy here.
Do all the products you carry come with a warranty?
Yes, every product we carry includes a manufacturer warranty. If you need help with a warranty claim, please contact us at info@minisplitsystemsdirect.com and will help you resolve any issues you are experiencing with your product.
Do you have a storefront?
At this time we do not have a storefront, we're an online only Authorized Dealer for all the brand we carry. We do have plans to open a storefront in the future.
How do I check the status of my order?
After placing your order you'll receive a confirmation email, and after a Shipment Confirmation email once your order has shipped which will contain your tracking number(s). The tracking number will be active within 24 hours. If you have any other questions regarding the status of your order please contact us at info@minisplitsystemsdirect.com or message us by live chat.
How long is shipping and delivery?
All orders made before 2:00 PM EST are processed within 2 - 3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day. Estimated delivery time is 3 - 7 days.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Who do you ship with?
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States.
How long will it take to receive my refund?
Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
What is your return policy?
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted. Please see our full return & refund policy here.
What forms of payment do you accept?
We accept all credit cards, PayPal, Apple Pay, and you can pay in installments with Sezzle at checkout.
What should I do if my order is damaged or I'm missing items?
Please contact us within 48 hours of receiving your order at info@minisplitsystemsdirect.com and we'll resolve the issue ASAP.
What should I do if my order was marked as delivered but I haven't received it?
Although we cannot control what happens once your order leaves the warehouse and is in the hands of the shipping carrier, we will do everything we can to make sure you receive your order. If you have not received your order, please contact us at info@minisplitsystemsdirect.com with your order number, and provide us with any details that may help and rest assured, we will resolve the issue.
I’m having trouble tracking my order. What should I do?
If your order has just been shipped, please wait 24 hours for your tracking number to be updated properly with your latest tracking information. If after 24 hours your tracking information is not populating, please contact us at info@minisplitsystemsdirect.com and we will be more than happy to assist you.
Description
1.5 Ton 15.2 SEER2 R32 Heat Pump Split System - Multi-Positional
The ACiQ Heat Pump Split System is a great choice to keep your home comfortable all season long. With tons of extra features and a great price, the ACiQ Heat Pump Split System is a perfect choice for all of your heating and cooling needs.
Product Features
- Complete all-electric heating and cooling system
- Pre-charged with R32 refrigerant
- Can be installed in upflow, downflow, or horizontal applications
- Well-suited for small homes in various climates
1.5 Ton 14.3 SEER2 Single Stage Heat Pump Condenser - R32
Overview
The ACiQ AQ-GLZS4BA1810 heat pump condenser is a standard efficiency, low-cost solution for an all-electric home when paired with a suitable heat pump coil or air handler. Just like all of ACiQ's equipment, the AQ-GLZS4BA1810 is manufactured with high-quality materials to provide a superior comfort in your home.
Utilizing advanced technology, the ACiQ heat pump condenser efficiently transfers heat between the indoors and outdoors, providing both heating and cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.
Quick Facts
- Ideal size to cover a smaller house in ideal climates
- 1.5 ton, 14.3 SEER2 heat pump condenser
- R32: Complies with Clean Air Act New Refrigerant Requirements
- Low sound output
- Fully charged for up to 15' of line set
- Factory-installed bi-flow filter drier
1.5 Ton
The ACiQ AQ-GLZS4BA1810 heat pump has a capacity of 1.5 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.
14.3 SEER2
At 14.3 SEER2, the AQ-GLZS4BA1810 heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.
Warranty
The AQ-GLZS4BA1810 condenser comes with ACiQ's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
Durability and Reliability
The ACiQ AQ-GLZS4BA1810 heat pump condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.
Installation and Maintenance
The ACiQ AQ-GLZS4BA1810 has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.
Comfort in Mind
With its sound control top insulation and SmartShift technology for quiet and reliable defrost cycles, the AQ-GLZS4BA1810 heat pump has some of the lowest sound outputs on a single stage unit on the market today.
Disclaimer: This condenser contains R32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty.
2 Ton Multi-Positional Air Handler - R32
Overview
The ACiQ AQ-AMST24BU1300 air handler is designed with an energy-saving, direct drive ECM blower motor and durable cabinet with multiple features that provide an easy installation. With this model, ACiQ upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.
Quick Facts
- 2 ton air handler
- Electric heat compatible
- Optimized for use with R32 refrigerant
- Multi-speed, direct drive ECM blower motor
- Multi-positional (upflow, downflow, or horizontal)
2 Tons
The ACiQ AQ-AMST24BU1300 air handler is rated for an output of 2 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.
Warranty
The AQ-AMST24BU1300 comes with ACiQ standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.
Durability and Reliability
With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the ACiQ AQ-AMST24BU1300 air handler is durable in design, making it a reliable solution for your home.
Installation and Maintenance
The ACiQ AQ-AMST24BU1300 utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there are two panels on the front to access vital areas on the air handler.
Enhanced Comfort
The AQ-AMST24BU1300 air handler lives up to ACiQ comfort expectations with its multi-speed ECM motor, which provides a more precise and efficient temperature control.
Condenser Specifications:
| SKU | AQ-GLZS4BA1810 |
| Weight | 165.000000 |
| Manufacturer | Private Brand |
| Replaces | GSZ140181, GSZ140191, GSZB401810 |
| Product Features | New Refrigerant Compliant |
| HSPF2 | 7.8 |
| Cooling BTU | 18,000 |
| Heating BTU | 18,000 |
| Decibel Level (dBA) | 74 |
| Horsepower | 1/6 HP |
| Refrigerant | R32 |
| SEER2 | 14.3 |
| Condenser Stages | Single Stage |
| Compressor Type | Rotary |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208/230v 1 Phase 60 Hz |
| Max Breaker Size | 15 Amps |
| Min. Breaker Size | 11.2 Amps |
| Tonnage | 1.5 Ton |
| Connection | Sweat |
| Height | 32 1/2" |
| Width | 29" |
| Depth | 29" |
| Warranty | 10 Years Parts Limited Warranty with Online Registration |
| Resources | |
| Safety Information | PROPOSITION 65 WARNING |
Air Handler Specifications:
| SKU | AQ-AMST24BU1300 |
| Weight | 112.000000 |
| Manufacturer | Private Brand |
| Product Features | New Refrigerant Compliant |
| Blower Motor | Multi-Speed Direct Drive ECM Motor |
| Maximum CFM | 1215 |
| Horsepower | 0.75 HP |
| Electric Backup Heat Capabilities (Optional) | 3 Kilowatts, 5 Kilowatts, 8 Kilowatts, 10 Kilowatts, 15 Kilowatts |
| Refrigerant | R32 |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208/240v 1 Phase 60Hz |
| Max Breaker Size | 15 Amps |
| Min. Breaker Size | 5.8 Amps |
| Tonnage | 2 Ton |
| Connection | 3/4" FPT |
| Height | 45" |
| Width | 17 9/16" |
| Depth | 21" |
| Warranty | 10 Years Parts with Online Registration |
| Resources | |
| Safety Information | PROPOSITION 65 WARNING |
Shipping Policy
Thank you for visiting and shopping at Mini Split Systems Direct. Following are the terms and conditions that constitute our Shipping Policy.
Domestic Shipping Policy
Shipment processing time
All orders made before 2:00 PM EST are processed within 2-3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping rates & delivery estimates
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States. We do not currently ship to international locations.
| Destination | Shipping method | Processing Time | Estimated Delivery Time | Shipment cost |
| United States | Free Shipping |
2 - 3 business days | 3 - 7 days | Free |
Delivery delays can occasionally occur.
Shipment confirmation & Order tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Customs, Duties and Taxes
Mini Split Systems Direct is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Damages & Missing Items
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Pre-Orders, Backorders, and Out-of-Stock Items:
Mini Split Systems Direct is dedicated to sourcing any item you may need and getting it to you as quickly as possible. Any items that are out of stock, or available for Pre-Order will be noted on the product page. You are welcome to place an order for Pre-Order items, backorder items, and for items that are out of stock, and will ship them the second they become available from the manufacturer, ensuring you get the item before anyone else. If you have questions about lead times, please refer to the product page or contact us at info@minisplitsystemsdirect.com or give a call or text at 1-800-315-4345
Return and Refund Policy
Returns
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted.
You can always contact us for any return questions at info@minisplitsystemsdirect.com, or call us at 1-800-315-4345.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. A 15% restocking fee and the cost of return shipping will be deducted from the refund. Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
Cancellations
All orders canceled after 24 hours are subject to a 5% administration fee, If your order has not been shipped yet, this is the only fee you will incur. This is a fee that covers administrative and personnel fees.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order.
Damages and issues
Please inspect all packages for damaged or missing items before accepting your shipment. If any of the items are missing or appear to have any type of damage; Mark the Receipt Damaged and/or missing (write which items are missing, or damaged and describe the damage).
Only refuse the items that are damaged, keep and sign for the items that are in good condition and be sure to notate the items that are being refused for damages clearly on the delivery receipt. You must contact our Customer Service Department at info@minisplitsystemsdirect.com to report which product(s) were missing and/or refused for damages and which product(s) were accepted at the time of delivery. After our Shipping Department receives confirmation from the Freight LTL Company we will promptly ship out the replacement product(s) to you.
Although Mini Split Systems Direct is NOT responsible for shipping damage, if your item(s) do arrive damaged, please send photos to info@minisplitsystemsdirect.com and we can assist with filing a claim against the shipping carrier to cover the cost of damages.
Any damages or missing items have to be noted on the delivery receipt prior to signing for and accepting your shipment in order to file a claim. Do not let the delivery driver rush you. It is your right to inspect each and every item.
Exchanges
The fastest way to ensure you get what you want is to return the item you have (see return process above), and once the return is accepted, make a separate purchase for the new item.
Price Match Policy
Our goal is to consistently provide the best pricing in the marketplace online and we work very diligently to do so. If you happen to see another online shop that offers a lower price than us within six months of your date please let us know and we’ll be happy to refund the difference on your original payment method. Moreover, because we are consistently working with our suppliers to get better rates we know that you can feel very comfortable and confident that you are seeing the best prices that can be provided for the products listed on our site.
Moving forward if you find the same item that we carry on another website that has a lower price please submit that to us within six months of your purchase date and we will refund you the difference.
If it is a case of seeing a lower price on another website and we need to send a partial refund simply email us the link to the exact product and brand from our site and also the link from our competitors site so we can inspect the pricing. Again this needs to be within six months from the date of your order and we will review your submission and apply a credit if necessary.
Our Price Match Policy has some limitations:
- The item must have already been purchased from our site prior to asking for this to be reviewed and submitted.
- This does not include rebate programs or specific retailer programs such as buy three get one free type offers or any combination such as that are not eligible.
- The item will need to be in stock from the competitors site that you’re submitting the information from.
- The competitor must be an online store, they may not have a retail location, warehouse, showroom, or physical location.
- The website cannot be a wholesaler, liquidator, distributor, or auction website. Examples are eBay, Liquadation.com, Via Trading, Overstock, Wayfair, Amazon, Home Depot, Lowes, etc.
- The competitor must also be someone who has been authorized by the supplier and/or manufacturer to resell the product you are inquiring about.
- The price match will include the product listing price, but will exclude any sales tax.
FAQ
Can I add a discount code to my order post-purchase?
Unfortunately were unable to add a discount code to your order after you've checked out, but, were happy to provide you with discount for your next purchase.
Can I add items to my order?
Yes, please contact us a soon as possible if you need to make changes to your order and will send an invoice for the remaining amount due. Please note this may result in you receiving your order in multiple packages, and yes, you will receive a tracking number for each package.
Can I change or modify my order?
Yes, you can change or modify your order within the first 24 hours after placing your order, after that, it will depend on the status of your order. If you need to change or modify your order, please contact us as soon as possible at info@minisplitsystemsdirect.com. If your order has already been processed and shipped, then we may be unable to change or modify your order.
Can I place my order to be delivered outside the United States?
At this time we do not ship internationally, but please contact us we may be able to accommodate you.
How can I remove items from my order?
If you need to remove items from your order, please contact us at info@minisplitsystemsdirect.com within the first 24 hours after you placed your order. After 24 hours, you are subject to a 5% fee for the item that is cancelled to cover incurred credit card processing fees. If your order has not been shipped yet, this is the only fee you will incur.
If your order has been shipped, you will not be charged a 5% administration fee, the standard return procedures will apply and you will be responsible for the cost of return shipping, and a 15% restocking fee will be ducted from your refund. Refunds will only be issued to the original payment method that you used when placing your order. For more information, please see our return & refund policy here.
Do all the products you carry come with a warranty?
Yes, every product we carry includes a manufacturer warranty. If you need help with a warranty claim, please contact us at info@minisplitsystemsdirect.com and will help you resolve any issues you are experiencing with your product.
Do you have a storefront?
At this time we do not have a storefront, we're an online only Authorized Dealer for all the brand we carry. We do have plans to open a storefront in the future.
How do I check the status of my order?
After placing your order you'll receive a confirmation email, and after a Shipment Confirmation email once your order has shipped which will contain your tracking number(s). The tracking number will be active within 24 hours. If you have any other questions regarding the status of your order please contact us at info@minisplitsystemsdirect.com or message us by live chat.
How long is shipping and delivery?
All orders made before 2:00 PM EST are processed within 2 - 3 business days. Items ordered on weekends (Saturday or Sunday) start to process and ship as early as the following business day. Estimated delivery time is 3 - 7 days.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Who do you ship with?
We offer standard free shipping via UPS Ground, FedEx Ground, and Freight for all orders in the United States.
How long will it take to receive my refund?
Please allow up to 10 business days for your bank or credit card company to process and post the refund to your account. If you have any questions regarding your refund, please contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345.
What is your return policy?
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused and in its original packaging.
All returns are subject to a 15% restocking fee, and the purchaser is responsible for the cost of return shipping.
To start a return, you can contact us at info@minisplitsystemsdirect.com or call us at 1-800-315-4345. If your return is accepted, we will either schedule a pickup or send you a return shipping label, as well as instructions on how and where to send your package. Items sent back without first requesting a return will not be accepted. Please see our full return & refund policy here.
What forms of payment do you accept?
We accept all credit cards, PayPal, Apple Pay, and you can pay in installments with Sezzle at checkout.
What should I do if my order is damaged or I'm missing items?
Please contact us within 48 hours of receiving your order at info@minisplitsystemsdirect.com and we'll resolve the issue ASAP.
What should I do if my order was marked as delivered but I haven't received it?
Although we cannot control what happens once your order leaves the warehouse and is in the hands of the shipping carrier, we will do everything we can to make sure you receive your order. If you have not received your order, please contact us at info@minisplitsystemsdirect.com with your order number, and provide us with any details that may help and rest assured, we will resolve the issue.
I’m having trouble tracking my order. What should I do?
If your order has just been shipped, please wait 24 hours for your tracking number to be updated properly with your latest tracking information. If after 24 hours your tracking information is not populating, please contact us at info@minisplitsystemsdirect.com and we will be more than happy to assist you.
Let customers speak for us
I absolutely love how easy it is to use and how well they fit and look. Awesome!!
Excellent. Placed unit in a two room cabin with each inside unit on the same common wall. Outside temps were in the low 40’s and the cabin was quickly warmed.
Very easy to install, and with a little trouble shooting with help from tech. it was very quietly putting out ice cold air... Had a bad fuse in my disconnect....
This is a good air conditioner for the price. Our apartment living room and kitchen have been kept nice and cool. The complex we moved into actually already had these installed but I have been so happy with the performance I purchased one for my mom who lives in a tiny home, I'm an HVAC tech and it was about time to replace her HVAC. Yes, I recommend this.
We have zero regrets! No wait, one. That we didn’t get them sooner! We (my husband, self and 19yr old son) work outside noon-8am several days a week in Texas. It doesn’t matter how low you set your AC unit it’s just never enough and it just runs it into the ground. We finally decided to pull the plug. In my 40 years I’ve never slept so good. It’s like hotel good but in your own bed!!! Install was super easy because I watched him do it, LOL. I kid. I’ll ask for his install input and update but seriously he installed all 4 (3 bedrooms and 1 living room) in 2 days. Probably wouldn’t have taken so long if he didn’t have to pour a pad for them but it was well worth it! Last pic is from the Nest. They were installed Friday. Compare usage from Sat & Sun to before we got them! Insane!!!
This was best investment I've ever made. I put this on the wall on my porch that I've converted to a sun room. This extra space that I enclosed with plexiglass and wood and sealed with insulation stayed about 20 degrees different from out side. With a window unit and heaters. Now with the split unit it stays what ever temp I want it to be. The della split unit is so quite I have to put my ear on it to hear it run sometimes the out side unit is even quite. If you mount on outside wall that is a little thin and only a few inches thick it might give a little bit of a hum but so slight you have to want to hear it. Turbo cool or heat will cool or heat super fast. The system is perfect 👌 👍 🥰. I love it.
I live in Florida and our summers are brutal. I installed this in my garage.
It wasn’t a hard install but it took my dad and I about 8 hours. He ran the electrical.
Around this time of the year, my garage is around 82 degrees and +70% humidity, the air is very wet.
This morning it was 74” and 52% humidity.
The indoor and outdoor units are remarkably quieter compared to our house’s HVAC system.
I bought and installed 2 of the della mini splits in the last 8 months, one for my double wide 1800 sqf that I am remodeling little by little, and another for my daughters craftsman home. What an improvement! So silent! So efficient! So easy of operating. For the last 10+ years, we have been using windows AC units and radiant heaters after our central heat and air system broke. The suffering is over. We are saving $100 a month on the power bill and enjoying ourselves inside now. Our Great Pyrenees friends are enjoying the AC's too during the scorching hot summer days. They are pretty easy to install. Follow the instructions on the book and watch some videos on YouTube. On the second install, I made an electrical mistake and purchased the wrong breaker. I am only a landscaper by the way. No problem! I called the technical support number and a very nice tech called me back after just a few hours and figured it out by phone within 5 minutes. It is all great! We just keep it simple by using the remotes. I love the delay timer option. Now that the weather is cooling down (80's max), I set the timer so it doesn't come ON automatically before 12 pm. By the time the girls come from school, 75°f is back as set. GREAT PRODUCT, GREAT TECHNICAL SUPPORT
Installation was a breeze. Unit is working flawlessly. I love that it connected to my Alexa and I can voice control or use the Della app. I am going to purchase a second Della for our guest home.
Got these panels for my backyard as the wall for the Composting area. Black is good for absorbing the heat of the sun and is easy to hide the ugly things. It is a good quality product. The foot support is stainless steel and long enough to bind the ground and the panels. As it is with a good quality, it is just a little heavy, which may require two people to move around or install it.
Solid plastic material. Assembly was easy with a power screwdriver. Looks better than an ugly air conditioner unit.
Great value and just the right size. Note that if you want to place them in a straight line, you will need to use an electric screwdriver to tighten the screws.
Made from good quality materials. Very easy to install and assemble. Looks great to hide the trash bins. Would buy more for AC.
I use it to cover the trash can. It is very practical. This way you can't see the dirty surface of the trash can. I strongly recommend it.
Great product. Installation was very easy
What customers think about the store
Customers generally had positive experiences with this store, praising the quality of products, reasonable prices, efficient delivery, and helpful customer service. Many found the systems easy to install themselves with the guidance provided, though some prefe...