This AHRI-certified Central Heat Pump Split System with Evaporator Coil & Modular Blower pairs the Goodman GZV6SA2410 2-ton, 18.0 SEER2, 8.5 HSPF2 variable-speed inverter-driven R-32 heat pump with the CAPEA3022C3 cased upflow/downflow evaporator coil (EEV) and the MBVK16CP1X00 variable-speed ECM communicating modular blower. This two-piece indoor arrangement provides flexible installation options while maintaining communicating system performance with variable-speed airflow management. AHRI Certified Reference Number: 215487256.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the 'Resources (System Manuals and Warranty)' Tab above on this page.
System Components
- GZV6SA2410 — Goodman 2-Ton, 18.0 SEER2 / 8.5 HSPF2, Variable-Speed Inverter-Driven R-32 Side Discharge Heat Pump Condenser (23,200 BTU/h cooling, 23,200 BTU/h heating at 47°F)
- CAPEA3022C3 — Goodman 2.5 Ton Nominal, Cased Upflow/Downflow, All-Aluminum Evaporator Coil with Factory-Installed EEV (21" W × 21" D × 22" H)
- MBVK16CP1X00 — Goodman Variable-Speed ECM Communicating Modular Blower (21" W × 21" D × 30" H, ¾ HP, 208/230V)
Pro-Installer Tip
The Technical Friction: A two-piece coil-and-blower system requires field assembly of the 21" evaporator coil atop the 21" modular blower. The stacked height (22" coil + 30" blower) totals approximately 52+ inches — verify ceiling clearance in closet/utility room installs.
The Long-Term Prevention: Ensure the coil-to-blower junction is sealed with UL 181B mastic. The MBVK blower's variable-speed ECM motor maintains constant CFM under varying static conditions, but verify total external static is within rated specifications to prevent premature motor bearing wear and callbacks.
The Expert Validation: Commission the MBVK blower in communicating mode, verifying DIP switch settings match the tonnage and trim configuration per the installation manual. Confirm subcooling at 12±1°F at the GZV6SA2410 outdoor unit using a calibrated digital manifold gauge set.
The Professional Standard: R-32 refrigerant (GWP 675) requires EPA Section 608 certification for handling. All brazing must use nitrogen purge. This 18 SEER2 system may qualify for federal tax credits under IRS 25C. Verify local code requirements for modular blower installations in confined spaces.
Key Benefits
- High-Efficiency Performance: 18.0 SEER2 and 8.5 HSPF2 ratings with variable-speed inverter technology reduce energy consumption compared to single-speed systems by running at lower speeds for longer periods, matching output to actual demand.
- R-32 Refrigerant: GWP of 675 — approximately 68% lower than R-410A (GWP 2,088). Supports 2025 EPA AIM Act HFC phase-down requirements and reduces direct greenhouse gas emission potential.
- Variable-Speed Operation: The swing compressor adjusts speed continuously rather than cycling on/off, providing tighter temperature control (±0.5°F vs. ±2°F for single-stage), reduced humidity, and lower sound levels (as low as 45 dBA in Quiet Mode).
- Flexible Two-Piece Indoor System: Separate coil and modular blower allow flexible installation configurations. The MBVK communicating blower provides variable-speed airflow management with dehumidification capability.
- Communicating System: EEV-equipped indoor components work with the outdoor unit's control board to optimize refrigerant flow and system performance. Compatible with Goodman GTST connected thermostat for advanced diagnostics.
- Cold Climate Capable: ENERGY STAR Most Efficient 2025 (Cold Climate) certified. Heat pump operates down to -10°F ambient, delivering 14,200 BTU/h at 5°F for reliable heating in harsh conditions.
Technical Specifications
| Specification | Value |
|---|---|
| AHRI Certificate Number | 215487256 |
| System Type | Central Heat Pump Split System with Evaporator Coil & Modular Blower |
| Nominal Capacity | 2 Ton |
| SEER2 | 18.0 |
| EER2 | 10.2 |
| HSPF2 | 8.5 |
| Refrigerant | R-32 |
| Cooling Capacity (95°F) | 23,200 BTU/h |
| Heating Capacity (47°F) | 23,200 BTU/h |
| Heating Capacity (5°F) | 14,200 BTU/h |
| Outdoor Unit Dimensions (W×D×H) | 36⅝" × 13¾" × 27⅜" |
| Outdoor Unit Weight | 122 lbs |
| Evaporator Coil Dimensions (W×D×H) | 21" × 21" × 22" |
| Evaporator Coil Weight | 51 lbs (shipping) |
| Modular Blower Dimensions (W×D×H) | 21" × 21" × 30" |
| Modular Blower Weight | 80 lbs (shipping) |
| Expansion Device | EEV (Electronic Expansion Valve) |
| Compressor Type | Variable-Speed Swing |
| Outdoor Unit Voltage | 208-230V / 1 Phase / 60 Hz |
| Min. Circuit Ampacity (Outdoor) | 16.8A |
| Max Overcurrent Protection (Outdoor) | 20A |
| Liquid Line Size | ⅜" |
| Suction Line Size | ¾" |
| Factory Charge | 74 oz |
| Sound Level (Quiet Mode) | As low as 45 dBA |
| Note: See 'Resources (System Manuals and Warranty)' Tab above for full specifications. | |
Compliance & Environmental Data
| Item | Detail |
|---|---|
| Refrigerant Type | R-32 (Difluoromethane) |
| Global Warming Potential (GWP) | 675 (~68% lower than R-410A) |
| EPA 608 Certification Required | Yes — Section 608 certification required for purchase, handling, and service of R-32 refrigerant |
| AHRI Certified | Yes — AHRI Certificate #215487256 |
| ETL Listed | Yes |
| ENERGY STAR® | ENERGY STAR Most Efficient 2025 (Cold Climate Heat Pump) |
| Regional Compliance | Meets DOE 2023 regional efficiency standards for all U.S. regions |
| Federal Tax Credit Eligibility | System may qualify for federal tax credits under IRS Section 25C for qualifying high-efficiency HVAC equipment — verify current thresholds and requirements with a qualified tax professional |
Warranty & Registration
Each component in this system carries its own manufacturer warranty from Daikin Comfort Technologies. Online registration within 60 days of installation is strongly recommended to obtain extended coverage.
- Outdoor Unit (GZV6SA2410): Unregistered: 5-Year Parts Limited Warranty. Registered (within 60 days): 10-Year Parts Limited Warranty; if the compressor fails within 10 years, Daikin will furnish a new equivalent replacement unit (one-time). Register at www.goodmanmfg.com.
- Evaporator Coil (CAPEA3022C3): Unregistered: 5-Year Parts Limited Warranty. Registered (within 60 days): 10-Year Parts Limited Warranty. Register at www.goodmanmfg.com.
- Modular Blower (MBVK16CP1X00): Unregistered: 5-Year Parts Limited Warranty. Registered (within 60 days): 10-Year Parts Limited Warranty. Register at www.goodmanmfg.com.
Warranty coverage applies to owner-occupied residences. Online registration is not required in California, Florida, or Québec. Duration of coverage in Texas and Florida may differ. Refer to individual component warranty documents for complete terms, limitations, and exclusions.
Let customers speak for us
What customers think about the store
Store offers excellent customer service with fast shipping and competitive pricing. Products arrive well-packaged and on time. Knowledgeable support staff assist with installations and technical questions. Customers appreciate quality HVAC systems, mini-splits...