1-800-315-4345
This AHRI-certified Goodman 2.5 Ton Central Heat Pump Split System with Evaporator Coil and Modular Blower delivers 17.5 SEER2 and 8.5 HSPF2 efficiency using R-32 refrigerant (GWP 675). The system pairs the GZV6SA3010 variable-speed heat pump condenser with the CAPEA3626C3 upflow/downflow evaporator coil and the MBVK16CP1X00 variable-speed ECM modular blower, verified under AHRI Certificate #215447158. This configuration is Energy Star Cold Climate certified, providing reliable heating performance down to -10°F.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the 'Resources (System Manuals and Warranty)' Tab above on this page.
System Components
- GZV6SA3010 — 2.5 Ton Variable-Speed Inverter-Driven R-32 Side-Discharge Heat Pump Condenser (28,400 BTU/h Cooling / 28,800 BTU/h Heating @ 47°F)
- CAPEA3626C3 — Cased Upflow/Downflow Evaporator Coil with EEV (21" W × 21" D × 26" H, Upflow/Downflow Configuration)
- MBVK16CP1X00 — Variable-Speed ECM Multi-Positional Modular Blower (21" W × 21" D × 30" H, ¾ HP Motor)
Fit: Flush — AHRI Certificate: #215447158
Pro-Installer Tip
Technical Friction: The GZV6S series uses R-32 refrigerant with an EEV on both the outdoor unit and the CAPEA3626C3 indoor coil. During installation, the two-piece modular blower and coil assembly requires precise alignment — a Flush fit between the MBVK16CP1X00 blower (21" cabinet) and the CAPEA3626C3 coil (21" cabinet) demands careful attention to transition fitment and seal integrity to prevent air bypass.
Long-Term Prevention: Pull a deep vacuum to 350 microns or below and hold for 15 minutes before charging. R-32 operates at approximately 12% higher discharge pressures than R-410A, making moisture contamination a more significant concern. Verify subcooling at 14±1°F at the service valve. A properly evacuated system prevents non-condensable gas accumulation that causes high head pressure nuisance calls 6-12 months post-installation.
Expert Validation: Use a digital micron gauge (not a compound gauge) to verify vacuum depth. Confirm subcooling with a digital manifold that compensates for R-32 properties. Verify blower airflow using the onboard CFM indicator — the variable-speed ECM motor should be configured for the matched tonnage in communicating mode.
Professional Standard: R-32 is an A2L mildly flammable refrigerant — ensure all installation practices comply with UL 60335-2-40 and local mechanical code requirements for A2L refrigerant systems. EPA Section 608 certification is required. This system meets 2023 Florida Building Code unit integrity requirements when properly anchored.
Key Benefits
- 17.5 SEER2 / 8.5 HSPF2 Efficiency — Variable-speed inverter compressor modulates capacity from low-stage to full-stage, reducing energy consumption during partial-load conditions that account for the majority of annual runtime hours.
- R-32 Low-GWP Refrigerant (GWP 675) — R-32 has 68% lower global warming potential than R-410A (GWP 2,088), uses approximately 20% less refrigerant charge by weight, and delivers improved thermodynamic efficiency at the same operating conditions.
- Cold Climate Heat Pump Performance — Energy Star Cold Climate certified with continuous heating capacity down to -10°F (17,300 BTU/h @ 5°F), reducing reliance on supplemental electric heat strips in the modular blower.
- Quiet Operation with Three-Level Sound Control — Normal-mode sound rating of 67 dBA (cooling) with field-selectable quiet mode (as low as 45 dBA), well below most municipal nighttime noise ordinances of 55 dBA.
- Variable-Speed ECM Blower Motor — The MBVK16CP1X00 modular blower provides constant CFM across a wide range of static pressures, improving dehumidification control and maintaining consistent comfort in communicating mode.
- All-Aluminum Evaporator Coil with EEV — The CAPEA3626C3 features an all-aluminum coil optimized for R-32 with an integrated electronic expansion valve for precise superheat control across the full modulation range.
Technical Specifications
| AHRI Certificate Number | 215447158 |
| System Type | Central Heat Pump Split System with Evaporator Coil & Modular Blower |
| Nominal Capacity | 2.5 Ton |
| SEER2 / EER2 | 17.5 / 10.0 |
| HSPF2 | 8.5 |
| Cooling Capacity (95°F) | 28,400 BTU/h |
| Heating Capacity (47°F) | 28,800 BTU/h |
| Heating Capacity (5°F) | 17,300 BTU/h |
| Refrigerant / Charge | R-32 / 76 oz |
| Compressor Type | Variable-Speed Swing |
| Expansion Device | EEV (Electronic Expansion Valve) |
| Coil-to-Blower Fit | Flush |
| Outdoor Unit — GZV6SA3010 | |
| Outdoor Unit Dimensions (W×D×H) | 36⅝" × 13¾" × 27⅜" |
| Outdoor Unit Weight / Ship Weight | 132 lbs / 147 lbs |
| Electrical | 208-230V / 1 Phase / 60 Hz |
| MCA / MOCP | 22.4A / 25A |
| Sound Level (Cooling / Heating) | 67 dBA / 70 dBA |
| Refrigerant Lines (Liquid / Suction) | ⅜" / ⅞" |
| Evaporator Coil — CAPEA3626C3 | |
| Coil Configuration | Upflow/Downflow, Cased |
| Coil Dimensions (W×D×H) | 21" × 21" × 26" |
| Coil Ship Weight | 57 lbs |
| Modular Blower — MBVK16CP1X00 | |
| Blower Configuration | Multi-Positional (Horizontal or Vertical) |
| Blower Dimensions (W×D×H) | 21" × 21" × 30" |
| Blower Motor | ¾ HP Variable-Speed ECM |
| Blower Ship Weight | 80 lbs |
Note: See 'Resources (System Manuals and Warranty)' Tab above for full specifications.
Compliance & Environmental Data
| Refrigerant Type | R-32 (Difluoromethane) |
| Global Warming Potential (GWP) | 675 (68% lower than R-410A) |
| ASHRAE Safety Classification | A2L (Lower Flammability) |
| EPA Section 608 Certification | Required for purchase, installation, and service |
| UL Safety Compliance | UL 60335-2-40 (A2L Refrigerant Systems) |
| Energy Star Certified | Yes (Cold Climate) |
| Regional Compliance | Meets DOE 2023 minimum efficiency standards for all U.S. regions |
| Federal Tax Credit Eligibility | This system may qualify for federal energy efficiency tax credits under the Inflation Reduction Act (25C). Consult a qualified tax professional for eligibility based on your specific situation and current IRS guidelines. |
Warranty & Registration
Each component in this system carries its own manufacturer warranty. Online registration must be completed within 60 days of installation to receive the full warranty coverage. Registration is not required in California, Florida, or Québec.
- GZV6SA3010 (Heat Pump Condenser): 10-Year Unit Replacement Limited Warranty and 10-Year Parts Limited Warranty when registered online within 60 days of installation. Without registration, coverage defaults to a reduced term. One-time Compressor Replacement coverage is available for years 11-99 through an ASURE Extend Service Plan. Duration of coverage may differ in Texas and Florida.
- CAPEA3626C3 (Evaporator Coil): 10-Year Parts Limited Warranty when registered online within 60 days of installation. Without timely registration, a reduced warranty term applies. Duration of coverage may differ in Texas and Florida.
- MBVK16CP1X00 (Modular Blower): 10-Year Parts Limited Warranty when registered online within 60 days of installation. Without timely registration, a reduced warranty term applies. Duration of coverage may differ in Texas and Florida.
Warranty terms are subject to limitations and exclusions. Refer to the manufacturer's complete warranty documents for full details, rights, and obligations. Changes in law, regulations, or technology may affect warranty terms.
Let customers speak for us
I absolutely love how easy it is to use and how well they fit and look. Awesome!!
Excellent. Placed unit in a two room cabin with each inside unit on the same common wall. Outside temps were in the low 40’s and the cabin was quickly warmed.
Very easy to install, and with a little trouble shooting with help from tech. it was very quietly putting out ice cold air... Had a bad fuse in my disconnect....
This is a good air conditioner for the price. Our apartment living room and kitchen have been kept nice and cool. The complex we moved into actually already had these installed but I have been so happy with the performance I purchased one for my mom who lives in a tiny home, I'm an HVAC tech and it was about time to replace her HVAC. Yes, I recommend this.
We have zero regrets! No wait, one. That we didn’t get them sooner! We (my husband, self and 19yr old son) work outside noon-8am several days a week in Texas. It doesn’t matter how low you set your AC unit it’s just never enough and it just runs it into the ground. We finally decided to pull the plug. In my 40 years I’ve never slept so good. It’s like hotel good but in your own bed!!! Install was super easy because I watched him do it, LOL. I kid. I’ll ask for his install input and update but seriously he installed all 4 (3 bedrooms and 1 living room) in 2 days. Probably wouldn’t have taken so long if he didn’t have to pour a pad for them but it was well worth it! Last pic is from the Nest. They were installed Friday. Compare usage from Sat & Sun to before we got them! Insane!!!
This was best investment I've ever made. I put this on the wall on my porch that I've converted to a sun room. This extra space that I enclosed with plexiglass and wood and sealed with insulation stayed about 20 degrees different from out side. With a window unit and heaters. Now with the split unit it stays what ever temp I want it to be. The della split unit is so quite I have to put my ear on it to hear it run sometimes the out side unit is even quite. If you mount on outside wall that is a little thin and only a few inches thick it might give a little bit of a hum but so slight you have to want to hear it. Turbo cool or heat will cool or heat super fast. The system is perfect 👌 👍 🥰. I love it.
I live in Florida and our summers are brutal. I installed this in my garage.
It wasn’t a hard install but it took my dad and I about 8 hours. He ran the electrical.
Around this time of the year, my garage is around 82 degrees and +70% humidity, the air is very wet.
This morning it was 74” and 52% humidity.
The indoor and outdoor units are remarkably quieter compared to our house’s HVAC system.
I bought and installed 2 of the della mini splits in the last 8 months, one for my double wide 1800 sqf that I am remodeling little by little, and another for my daughters craftsman home. What an improvement! So silent! So efficient! So easy of operating. For the last 10+ years, we have been using windows AC units and radiant heaters after our central heat and air system broke. The suffering is over. We are saving $100 a month on the power bill and enjoying ourselves inside now. Our Great Pyrenees friends are enjoying the AC's too during the scorching hot summer days. They are pretty easy to install. Follow the instructions on the book and watch some videos on YouTube. On the second install, I made an electrical mistake and purchased the wrong breaker. I am only a landscaper by the way. No problem! I called the technical support number and a very nice tech called me back after just a few hours and figured it out by phone within 5 minutes. It is all great! We just keep it simple by using the remotes. I love the delay timer option. Now that the weather is cooling down (80's max), I set the timer so it doesn't come ON automatically before 12 pm. By the time the girls come from school, 75°f is back as set. GREAT PRODUCT, GREAT TECHNICAL SUPPORT
Installation was a breeze. Unit is working flawlessly. I love that it connected to my Alexa and I can voice control or use the Della app. I am going to purchase a second Della for our guest home.
Got these panels for my backyard as the wall for the Composting area. Black is good for absorbing the heat of the sun and is easy to hide the ugly things. It is a good quality product. The foot support is stainless steel and long enough to bind the ground and the panels. As it is with a good quality, it is just a little heavy, which may require two people to move around or install it.
Solid plastic material. Assembly was easy with a power screwdriver. Looks better than an ugly air conditioner unit.
Great value and just the right size. Note that if you want to place them in a straight line, you will need to use an electric screwdriver to tighten the screws.
Made from good quality materials. Very easy to install and assemble. Looks great to hide the trash bins. Would buy more for AC.
I use it to cover the trash can. It is very practical. This way you can't see the dirty surface of the trash can. I strongly recommend it.
Great product. Installation was very easy
What customers think about the store
Store offers excellent customer service with fast shipping and competitive pricing. Products arrive well-packaged and on time. Knowledgeable support staff assist with installations and technical questions. Customers appreciate quality HVAC systems, mini-splits...