This Goodman 3-Ton Central Heat Pump Split System combines the GZV6SA3610* variable-speed heat pump condenser with the AHVE36CP1300 variable-speed air handler. AHRI-certified (Certificate #215429193) at 16.6 SEER2 and 8.5 HSPF2, this matched system uses R-32 low-GWP refrigerant and provides both heating and cooling from a single all-electric platform. The air handler features an integrated EEV and communicating variable-speed ECM blower for precise airflow and humidity management.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the 'Resources (System Manuals and Warranty)' Tab above on this page.
System Components
- Outdoor Heat Pump Condenser: Goodman GZV6SA3610* — 3-Ton variable-speed inverter-driven R-32 heat pump with swing compressor, EEV metering, and digitally commutated condenser fan motor. Sound power as low as 45 dBA in quiet mode.
- Air Handler: Goodman AHVE36CP1300A* — 3-Ton Multi-Positional variable-speed ECM air handler (208/230V) with integrated EEV, all-aluminum evaporator coil, factory-installed R-32 sensor, and SmartFrame cabinet with less than 2% air leakage. 21" depth for attic access compatibility.
Pro-Installer Tip
The Technical Friction: The AHVE air handler's 21" cabinet depth enables attic installations, but the 53-7/16" overall height requires careful verification of available vertical clearance, especially under low-pitch rafters. The coil mounting track allows repositioning, but suction and liquid line routing must accommodate the final coil orientation without kinking.
The Long-Term Prevention: After positioning the air handler, install the condensate drain trap before running the system. The thermoplastic drain pan includes secondary drain connections — always pipe the secondary to a visible location (like over a window) as an overflow indicator. This single step prevents 90% of water-damage callbacks within the first year.
The Expert Validation: Use the CoolCloud app during commissioning to verify the communicating link between the outdoor unit and air handler. Confirm the EEV superheat is auto-controlled and the subcooling at the outdoor service valve reads 15 +/- 1 deg.F using a digital manifold gauge.
The Professional Standard: Verify the return air duct connections meet the ASHRAE 193 cabinet air leakage standard (less than 2% at 1.0" w.c.). Apply UL-listed mastic sealant at all duct-to-cabinet joints. In jurisdictions requiring Manual J load calculations, confirm the selected tonnage matches the calculated cooling load to avoid oversizing, which degrades dehumidification performance.
Key System Benefits
- All-Electric Operation: No combustion, no flue venting, and no gas line required — this all-electric heat pump system simplifies installation and eliminates carbon monoxide risk in the conditioned space.
- High Seasonal Efficiency: 16.6 SEER2 cooling and 8.5 HSPF2 heating ratings deliver substantial energy savings over standard-efficiency equipment, potentially qualifying for federal tax credits under the Inflation Reduction Act.
- Variable-Speed Comfort: The outdoor inverter compressor and indoor ECM blower motor modulate to match the actual load, reducing temperature swings, improving humidity removal, and lowering sound levels during part-load operation.
- Low-GWP R-32 Refrigerant: R-32 has a 68% lower global warming potential than R-410A and provides higher volumetric cooling capacity, supporting compliance with the AIM Act refrigerant phasedown schedule.
- Integrated EEV Metering: The factory-installed electronic expansion valve in the air handler provides precise refrigerant flow control across all operating conditions, eliminating the need for field-installed metering devices and piston kits.
- Quiet Operation: The outdoor unit operates as low as 45 dBA in quiet mode, and the variable-speed air handler reduces blower noise at part-load by running at lower speeds.
Technical Specifications
| System Performance (AHRI Certificate #215429193) | |
|---|---|
| SEER2 | 16.6 |
| HSPF2 | 8.5 |
| Refrigerant | R-32 |
| Outdoor Unit — GZV6SA3610* | |
| Cooling Capacity (BTU/h) | 34,200 |
| Heating Capacity @47°F (BTU/h) | 34,600 |
| Heating Capacity @17°F (BTU/h) | 20,000 |
| Compressor Type | Variable-Speed Swing |
| Sound Level (Cooling/Heating) | 68 / 71 dBA (as low as 45 dBA in quiet mode) |
| Dimensions (W x D x H) | 36-5/8" x 13-3/4" x 27-3/8" |
| Operating Weight / Ship Weight | 137 lbs / 151 lbs |
| Electrical | 208-230V / 1 Phase / 60 Hz |
| MCA / MOCP | 22.4A / 25A |
| Refrigerant Charge | 83 oz (factory charge for 15' line set) |
| Line Connections (Liquid / Suction) | 3/8" / 7/8" |
| Air Handler — AHVE36CP1300A* | |
| Configuration | Multi-Positional |
| Nominal Capacity | 3-Ton |
| Cabinet Dimensions (W x D x H) | 21" x 21" x 53-7/16" |
| Blower Motor | 3/4 HP Variable-Speed ECM |
| Electrical | 208-230V / 1 Phase / 60 Hz |
| MCA / MOCP | 6.5A / 15A |
| Expansion Device | EEV (Electronic Expansion Valve) |
| Line Connections (Liquid / Suction) | 3/8" / 7/8" |
| Ship Weight | 140 lbs |
Note: See 'Resources (System Manuals and Warranty)' Tab above for full specifications.
Compliance & Environmental Data
| Category | Details |
|---|---|
| Refrigerant Type | R-32 (Difluoromethane) — A2L (mildly flammable) classification |
| Global Warming Potential (GWP) | 675 (68% lower than R-410A at 2,088) |
| EPA Section 608 Requirements | EPA-certified technician required for refrigerant handling; R-32 requires A2L-rated recovery equipment and leak detection |
| Regional Compliance | All-region sales designation (Region A); verify local A2L refrigerant installation codes and charge density limits per ASHRAE 15 |
| Federal Tax Credit Eligibility | Heat pump systems meeting efficiency thresholds may qualify for federal tax credits under the Inflation Reduction Act (25C) — consult a qualified tax professional for current eligibility requirements |
| Certifications | AHRI Certified; ETL Listed; ENERGY STAR (when matched with qualifying indoor components) |
Warranty & Registration
- Outdoor Heat Pump (GZV6SA3610*): 5-Year Initial Term parts warranty. With online registration at goodmanmfg.com within 60 days of installation: 10-Year Registered Additional Term parts warranty. If the compressor fails within the first 10 years in a registered unit, Goodman will furnish a new replacement outdoor unit (one time). Registration not required in California, Florida, or Quebec.
- Air Handler (AHVE36CP1300A*): 5-Year Initial Term parts warranty. With online registration at goodmanmfg.com within 60 days of installation: 10-Year Registered Additional Term parts warranty. Registration not required in California, Florida, or Quebec.
All warranties apply to owner-occupied residential installations only. Different terms apply to commercial and rental properties. Labor, refrigerant, freight, and other service costs are not covered. Complete warranty details are available at goodmanmfg.com.
Let customers speak for us
What customers think about the store
Store offers excellent customer service with fast shipping and competitive pricing. Products arrive well-packaged and on time. Knowledgeable support staff assist with installations and technical questions. Customers appreciate quality HVAC systems, mini-splits...