1-800-315-4345
This Goodman 3-Ton Central Heat Pump Split System with Evaporator Coil & Modular Blower pairs the GZV6SA3610* variable-speed heat pump with the CHPEA3626B3 evaporator coil and MBVK12BP1X00 communicating modular blower. AHRI-certified (Certificate #215447182) at 16.6 SEER2 and 8.5 HSPF2, this configuration uses R-32 low-GWP refrigerant and provides efficient all-electric heating and cooling. The modular blower and coil design offers flexible installation options in both vertical and horizontal orientations.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the 'Resources (System Manuals and Warranty)' Tab above on this page.
System Components
- Outdoor Heat Pump Condenser: Goodman GZV6SA3610* — 3-Ton variable-speed inverter-driven R-32 heat pump with swing compressor, EEV metering, and digitally commutated condenser fan motor. Sound power as low as 45 dBA in quiet mode.
- Evaporator Coil: Goodman CHPEA3626B3A* — 3-Ton cased Horizontal all-aluminum evaporator coil with integrated EEV, factory-installed R-32 sensor, and thermoplastic drain pan with secondary drain connection.
- Modular Blower: Goodman MBVK12BP1X00AA — 1200-CFM variable-speed ECM communicating modular blower (17-1/2") with SmartFrame cabinet, integrated ComfortBridge technology, and built-in dehumidification feature. Compatible with R-32 refrigerant with integration kit.
Pro-Installer Tip
The Technical Friction: The two-piece coil-and-blower configuration offers installation flexibility, but the coil width must match the blower cabinet width for a proper seal. Mismatched widths create air bypass around the coil face, reducing system capacity and triggering low-superheat fault codes from the outdoor unit's EEV controller.
The Long-Term Prevention: After mounting the coil on the blower, verify the drain pan rail alignment and apply foil-faced tape at the coil-to-blower junction seam. Pressure-test the completed assembly with a duct leakage tester — total air leakage should remain below 2% at 1.0" w.c. per ASHRAE 193. This prevents efficiency loss and condensation issues that often surface 6-8 months after installation.
The Expert Validation: Verify the communicating connection between the MBVK blower, the evaporator coil's EEV, and the outdoor unit through the CoolCloud app. Confirm the blower is configured for the correct tonnage setting and that the EEV superheat is auto-controlled, with subcooling reading 15 +/- 1 deg.F at the outdoor unit's service valve.
The Professional Standard: The R-32 integration kit must be installed on the blower for R-32 compatibility. Verify the R-32 leak sensor on the coil is functional before sealing the access panel. In jurisdictions enforcing ASHRAE 15 or state-level A2L refrigerant handling requirements, ensure the installation meets maximum charge density limits for the occupied space.
Key System Benefits
- Modular Installation Flexibility: The separate coil and blower design allows each component to be positioned independently, accommodating tight mechanical closets, attics, and crawl spaces where a single-piece air handler may not fit.
- High Seasonal Efficiency: 16.6 SEER2 cooling and 8.5 HSPF2 heating ratings maximize energy savings across both seasons, potentially qualifying for federal tax credits and utility rebates.
- Variable-Speed Comfort: The variable-speed outdoor compressor and communicating ECM blower motor work together to modulate airflow and capacity, delivering consistent temperatures and improved dehumidification at part-load conditions.
- Low-GWP R-32 Refrigerant: R-32 has a 68% lower global warming potential than R-410A and offers higher volumetric cooling capacity, supporting the industry transition under the AIM Act phasedown schedule.
- Communicating Integration: The MBVK blower's ComfortBridge technology communicates directly with the outdoor unit and compatible thermostat, enabling automated airflow configuration, tonnage matching, and diagnostic reporting through the CoolCloud app.
Technical Specifications
| System Performance (AHRI Certificate #215447182) | |
|---|---|
| SEER2 | 16.6 |
| HSPF2 | 8.5 |
| Refrigerant | R-32 |
| Outdoor Unit — GZV6SA3610* | |
| Cooling Capacity (BTU/h) | 34,200 |
| Heating Capacity @47°F (BTU/h) | 34,600 |
| Heating Capacity @17°F (BTU/h) | 20,000 |
| Compressor Type | Variable-Speed Swing |
| Sound Level (Cooling/Heating) | 68 / 71 dBA (as low as 45 dBA in quiet mode) |
| Dimensions (W x D x H) | 36-5/8" x 13-3/4" x 27-3/8" |
| Operating Weight / Ship Weight | 137 lbs / 151 lbs |
| Electrical | 208-230V / 1 Phase / 60 Hz |
| MCA / MOCP | 22.4A / 25A |
| Refrigerant Charge | 83 oz (factory charge for 15' line set) |
| Line Connections (Liquid / Suction) | 3/8" / 7/8" |
| Evaporator Coil — CHPEA3626B3A* | |
| Configuration | Horizontal (Cased) |
| Cabinet Dimensions (W x D x H) | 26" x 21" x 17-1/2" |
| Expansion Device | EEV (Electronic Expansion Valve) |
| Line Connections (Liquid / Suction) | 5/16" or 3/8" / 3/4" or 7/8" |
| Ship Weight | 68 lbs |
| Modular Blower — MBVK12BP1X00AA | |
| Configuration | Multi-Positional (Vertical / Horizontal) |
| Airflow | Up to 1200 CFM |
| Cabinet Dimensions (W x D x H) | 17-1/2" x 21" x 26" |
| Blower Motor | 1/2 HP Variable-Speed ECM |
| Electrical | 208-230V / 1 Phase / 60 Hz |
| MCA / MOCP | 4.9A / 15A |
| Ship Weight | 67 lbs |
Note: See 'Resources (System Manuals and Warranty)' Tab above for full specifications.
Compliance & Environmental Data
| Category | Details |
|---|---|
| Refrigerant Type | R-32 (Difluoromethane) — A2L (mildly flammable) classification |
| Global Warming Potential (GWP) | 675 (68% lower than R-410A at 2,088) |
| EPA Section 608 Requirements | EPA-certified technician required for refrigerant handling; R-32 requires A2L-rated recovery equipment and leak detection |
| Regional Compliance | All-region sales designation (Region A); verify local A2L refrigerant installation codes and charge density limits per ASHRAE 15 |
| Federal Tax Credit Eligibility | Heat pump systems meeting efficiency thresholds may qualify for federal tax credits under the Inflation Reduction Act (25C) — consult a qualified tax professional for current eligibility requirements |
| Certifications | AHRI Certified; ETL Listed; ENERGY STAR (when matched with qualifying indoor components) |
Warranty & Registration
- Outdoor Heat Pump (GZV6SA3610*): 5-Year Initial Term parts warranty. With online registration at goodmanmfg.com within 60 days of installation: 10-Year Registered Additional Term parts warranty. If the compressor fails within the first 10 years in a registered unit, Goodman will furnish a new replacement outdoor unit (one time). Registration not required in California, Florida, or Quebec.
- Evaporator Coil (CHPEA3626B3A*): 5-Year Initial Term parts warranty. With online registration at goodmanmfg.com within 60 days of installation: 10-Year Registered Additional Term parts warranty. Registration not required in California, Florida, or Quebec.
- Modular Blower (MBVK12BP1X00AA): 5-Year Initial Term parts warranty. With online registration at goodmanmfg.com within 60 days of installation: 10-Year Registered Additional Term parts warranty. Registration not required in California, Florida, or Quebec.
All warranties apply to owner-occupied residential installations only. Different terms apply to commercial and rental properties. Labor, refrigerant, freight, and other service costs are not covered. Complete warranty details are available at goodmanmfg.com.
Let customers speak for us
I absolutely love how easy it is to use and how well they fit and look. Awesome!!
Excellent. Placed unit in a two room cabin with each inside unit on the same common wall. Outside temps were in the low 40’s and the cabin was quickly warmed.
Very easy to install, and with a little trouble shooting with help from tech. it was very quietly putting out ice cold air... Had a bad fuse in my disconnect....
This is a good air conditioner for the price. Our apartment living room and kitchen have been kept nice and cool. The complex we moved into actually already had these installed but I have been so happy with the performance I purchased one for my mom who lives in a tiny home, I'm an HVAC tech and it was about time to replace her HVAC. Yes, I recommend this.
We have zero regrets! No wait, one. That we didn’t get them sooner! We (my husband, self and 19yr old son) work outside noon-8am several days a week in Texas. It doesn’t matter how low you set your AC unit it’s just never enough and it just runs it into the ground. We finally decided to pull the plug. In my 40 years I’ve never slept so good. It’s like hotel good but in your own bed!!! Install was super easy because I watched him do it, LOL. I kid. I’ll ask for his install input and update but seriously he installed all 4 (3 bedrooms and 1 living room) in 2 days. Probably wouldn’t have taken so long if he didn’t have to pour a pad for them but it was well worth it! Last pic is from the Nest. They were installed Friday. Compare usage from Sat & Sun to before we got them! Insane!!!
This was best investment I've ever made. I put this on the wall on my porch that I've converted to a sun room. This extra space that I enclosed with plexiglass and wood and sealed with insulation stayed about 20 degrees different from out side. With a window unit and heaters. Now with the split unit it stays what ever temp I want it to be. The della split unit is so quite I have to put my ear on it to hear it run sometimes the out side unit is even quite. If you mount on outside wall that is a little thin and only a few inches thick it might give a little bit of a hum but so slight you have to want to hear it. Turbo cool or heat will cool or heat super fast. The system is perfect 👌 👍 🥰. I love it.
I live in Florida and our summers are brutal. I installed this in my garage.
It wasn’t a hard install but it took my dad and I about 8 hours. He ran the electrical.
Around this time of the year, my garage is around 82 degrees and +70% humidity, the air is very wet.
This morning it was 74” and 52% humidity.
The indoor and outdoor units are remarkably quieter compared to our house’s HVAC system.
I bought and installed 2 of the della mini splits in the last 8 months, one for my double wide 1800 sqf that I am remodeling little by little, and another for my daughters craftsman home. What an improvement! So silent! So efficient! So easy of operating. For the last 10+ years, we have been using windows AC units and radiant heaters after our central heat and air system broke. The suffering is over. We are saving $100 a month on the power bill and enjoying ourselves inside now. Our Great Pyrenees friends are enjoying the AC's too during the scorching hot summer days. They are pretty easy to install. Follow the instructions on the book and watch some videos on YouTube. On the second install, I made an electrical mistake and purchased the wrong breaker. I am only a landscaper by the way. No problem! I called the technical support number and a very nice tech called me back after just a few hours and figured it out by phone within 5 minutes. It is all great! We just keep it simple by using the remotes. I love the delay timer option. Now that the weather is cooling down (80's max), I set the timer so it doesn't come ON automatically before 12 pm. By the time the girls come from school, 75°f is back as set. GREAT PRODUCT, GREAT TECHNICAL SUPPORT
Installation was a breeze. Unit is working flawlessly. I love that it connected to my Alexa and I can voice control or use the Della app. I am going to purchase a second Della for our guest home.
Got these panels for my backyard as the wall for the Composting area. Black is good for absorbing the heat of the sun and is easy to hide the ugly things. It is a good quality product. The foot support is stainless steel and long enough to bind the ground and the panels. As it is with a good quality, it is just a little heavy, which may require two people to move around or install it.
Solid plastic material. Assembly was easy with a power screwdriver. Looks better than an ugly air conditioner unit.
Great value and just the right size. Note that if you want to place them in a straight line, you will need to use an electric screwdriver to tighten the screws.
Made from good quality materials. Very easy to install and assemble. Looks great to hide the trash bins. Would buy more for AC.
I use it to cover the trash can. It is very practical. This way you can't see the dirty surface of the trash can. I strongly recommend it.
Great product. Installation was very easy
What customers think about the store
Store offers excellent customer service with fast shipping and competitive pricing. Products arrive well-packaged and on time. Knowledgeable support staff assist with installations and technical questions. Customers appreciate quality HVAC systems, mini-splits...