Goodman 5 Ton 16.6 SEER2 Central Heat Pump Split System Overview
This AHRI-certified central heat pump split system (Certificate #215429797) combines the Goodman GZV6SA6010 variable-speed heat pump condenser with the AHVE60DP0300 multi-positional air handler. Using next-generation R-32 refrigerant (GWP 675), this matched system achieves up to 16.6 SEER2 and 8.2 HSPF2 ratings. The outdoor unit provides up to 53,500 BTU/h in cooling and 54,500 BTU/h in heat pump heating at 47°F. The variable-speed compressor and VS-ECM air handler motor work together for enhanced humidity control, quieter operation, and consistent comfort across all load conditions.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the 'Resources (System Manuals and Warranty)' Tab above on this page.
System Components
- GZV6SA6010 — Goodman 5 Ton Variable-Speed Side Discharge Heat Pump Condenser (R-32, EEV, 37" W x 12⅝" D x 39" H)
- AHVE60DP0300 — Goodman 5 Ton Multi-Positional Variable-Speed Air Handler (24½" Cabinet Width, 115V / 1 Phase / 60 Hz)
Pro-Installer Tip
Technical Friction: Air handler installations in tight attic or closet spaces require careful attention to return air clearances. At 58 inches tall, the AHVE60 demands vertical space planning — especially in horizontal configurations where condensate drain routing and filter access become the most common callback triggers.
Long-Term Prevention: Install the condensate drain with a proper trap and secondary drain or float switch per local code. A clogged primary drain on a 5-ton system can produce significant water damage in minutes. Pre-install a condensate management accessory kit and slope the primary drain at minimum ¼" per foot to prevent standing water and biological growth.
Expert Validation: After evacuation, verify the system holds below 500 microns for a minimum of 15 minutes using a digital micron gauge — not a compound gauge. With 118 oz of R-32 factory charge plus any field additions for line set length, accurate measurement prevents overcharging that degrades EEV performance and compressor longevity.
Professional Standard: R-32 systems require copper linesets rated for higher working pressures (minimum 700 PSI burst). Verify all flare connections with a calibrated torque wrench to manufacturer specifications — over-torquing R-32 flares is the leading cause of slow leaks. Confirm local jurisdiction has adopted A2L refrigerant provisions.
Key Performance Benefits
- High-Efficiency Cooling & Heating: Up to 16.6 SEER2 / 9.0 EER2 / 8.2 HSPF2 ratings verified through AHRI certification (#215429797), delivering dependable seasonal performance across varying climate conditions.
- Next-Generation R-32 Refrigerant: R-32 has a GWP of 675, approximately 68% lower than R-410A (GWP 2,088). This translates to reduced environmental impact while maintaining comparable thermodynamic efficiency, and positions the system for long-term regulatory compliance.
- Variable-Speed Compressor Technology: The GZV6SA6010 uses a variable-speed swing compressor that modulates capacity to match real-time load demands. This reduces energy consumption during part-load conditions, minimizes temperature swings, and improves whole-house humidity control compared to single-speed or two-stage systems.
- Quiet Operation: Three-level quiet mode allows sound suppression down to 45 dBA sound pressure at 3 feet. The digitally commutated fan motor and high-density compressor sound blanket further reduce operational noise — a measurable improvement for installations near bedrooms, patios, and property lines subject to local noise ordinances.
- All-Electric Heating & Cooling: Eliminates the need for gas infrastructure, simplifying installation and reducing carbon emissions. The variable-speed compressor provides effective heating down to -10°F ambient, covering most residential heating loads without supplemental heat.
- VS-ECM Air Handler Motor: The variable-speed electronically commutated motor in the air handler adjusts airflow to match system demand, reducing electrical consumption by up to 75% compared to standard PSC motors while maintaining consistent comfort.
Technical Specifications
| Specification | Value |
|---|---|
| AHRI Certificate Number | 215429797 |
| System Type | Central Heat Pump Split System |
| Nominal Capacity | 5 Ton (60,000 BTU/h Nominal) |
| SEER2 Rating | 16.6 |
| EER2 Rating | 9.0 |
| HSPF2 Rating | 8.2 |
| Max Cooling Capacity | 53,500 BTU/h at 95°F |
| Max Heating Capacity (47°F) | 54,500 BTU/h |
| Max Heating Capacity (5°F) | 33,000 BTU/h |
| Refrigerant Type | R-32 |
| Factory Charge | 118 oz |
| Expansion Device | EEV (Electronic Expansion Valve) |
| Compressor Type | Variable-Speed Swing |
| Outdoor Unit — GZV6SA6010 | |
| Dimensions (W x D x H) | 37" x 12⅝" x 39" |
| Equipment Weight | 179 lbs |
| Electrical | 208-230V / 1 Phase / 60 Hz |
| Min. Circuit Ampacity (MCA) | 37.5A |
| Max Overcurrent Protection | 40A |
| Liquid Line | ⅜" |
| Suction Line | 1⅛" |
| Air Handler — AHVE60DP0300 | |
| Configuration | Multi-Positional |
| Cabinet Width | 24½" |
| Height | 58" |
| Depth | 21" |
| Blower Motor | 1 HP VS-ECM |
| Electrical | 115V / 1 Phase / 60 Hz |
| Weight | 167 lbs |
| Note: See 'Resources (System Manuals and Warranty)' Tab above for full specifications. | |
Compliance & Environmental Data
| Category | Detail |
|---|---|
| Refrigerant Type | R-32 (Difluoromethane) |
| Global Warming Potential (GWP) | 675 (approximately 68% lower than R-410A at 2,088) |
| ASHRAE Safety Classification | A2L (Lower Flammability) |
| EPA Section 608 Requirements | Certified technicians required for refrigerant handling; venting prohibition applies per Clean Air Act |
| Regional Compliance | All Regions — meets DOE 2023 minimum efficiency standards |
| AHRI Certified | Yes (Certificate #{ahri}) |
| ETL Listed | Yes |
| Energy Star Cold Climate | No |
| Federal Tax Credit Eligibility (25C) | This system may qualify for a federal tax credit under IRC Section 25C for energy-efficient home improvements. Consult a qualified tax professional to verify eligibility and current credit amounts based on the installed configuration and applicable tax year requirements. |
Warranty & Registration
- Outdoor Unit (GZV6SA6010): 5-Year Initial Term Limited Warranty on all parts. With online registration at goodmanmfg.com within 60 days of installation, coverage extends to 10-Year Registered Additional Term Limited Warranty on all parts. Coverage applies to owner-occupied residential installations only. Registration requirements may not apply in Florida, California, or Québec. Labor, refrigerant, and freight are not covered.
- Air Handler (AHVE60DP0300): 5-Year Initial Term Limited Warranty on all parts. With registration within 60 days at goodmanmfg.com, extends to 10-Year Registered Additional Term Limited Warranty on all parts. Owner-occupied residential installations only. Labor, refrigerant, and freight are not covered.
Let customers speak for us
What customers think about the store
Store offers excellent customer service with fast shipping and competitive pricing. Products arrive well-packaged and on time. Knowledgeable support staff assist with installations and technical questions. Customers appreciate quality HVAC systems, mini-splits...