Your Cart ()
cload

GUARANTEED SAFE & SECURE CHECKOUT

Free Shipping | Call for Best Pricing: 1-800-315-4345

Got a Question? Call Us

Phone Icon 1-800-315-4345

Monday-Saturday 9am-6pm EST

Goodman | 3 Ton | 19.0 SEER2 | R-32 | Central Heat Pump Split System with Evaporator Coil & Modular Blower | GZV7SA3610 | CAPEA4830D3 | MBVK20DP1X00 | 24½" Cabinet Width | Upflow/Downflow | Coil

SKU: GZV7SA3610-CAPEA4830D3-MBVK20DP1X00-215433923
Your Price:
$6,058.00 $7,815.00
You Save: $1,757.00 23%
Checkout Secure

Quantity Remaining:

306 of 400 Sold
Order in the next to get it by

This Goodman Central Heat Pump Split System with Evaporator Coil & Modular Blower pairs the GZV7SA3610 3-Ton R-32 variable-speed heat pump condenser with the CAPEA4830D3 cased evaporator coil and the MBVK20DP1X00 modular blower. Rated at 19.0 SEER2, 8.5 HSPF2, and 10.5 EER2, this AHRI-certified combination (Certificate #215433923) provides all-electric heating and cooling with the flexibility of a separate blower and coil configuration. This system uses R-32 refrigerant (GWP 675), a lower-GWP alternative that supports the EPA’s AIM Act phase-down schedule. It qualifies for ENERGY STAR® Cold Climate certification and may be eligible for federal tax credits under the Inflation Reduction Act (IRA) — consult a qualified tax professional for details.

Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the ‘Resources (System Manuals and Warranty)’ Tab above on this page.

System Components

  • GZV7SA3610 — Goodman 3-Ton, Variable-Speed, Inverter-Driven, Side-Discharge R-32 Heat Pump Condenser (208-230V/1Ph/60Hz)
  • CAPEA4830D3 — Goodman Cased Upflow/Downflow Evaporator Coil with EEV (24½" W × 21" D × 30" H)
  • MBVK20DP1X00 — Goodman Multi-Positional Modular Blower (24½" W × 21" D × 30" H, ¾ HP 208/230V)

Pro-Installer Tip: Modular Blower & Coil Stack Configuration

The Technical Friction: The MBVK modular blower paired with a separate evaporator coil creates a two-piece indoor section that must be sealed at the junction to prevent cabinet air leakage exceeding code limits. If the fit between the blower and coil isn’t flush (check the “Fit” column in the AHRI matchup), you may need transition adapters or field-fabricated sheet metal to maintain airtight connections. Mismatched cabinet widths between the blower and coil will create an air bypass that degrades both efficiency and dehumidification.

The Long-Term Prevention: Seal all joints with UL-listed foil tape and mastic, then verify cabinet leakage with a duct blaster or pressure pan test. The MBVK blower’s variable-speed ECM motor auto-ramps to maintain target CFM, but an improperly sealed junction will cause the motor to overwork, increasing energy consumption and shortening motor life over 6–12 months. Document measured static pressure and airflow at commissioning.

The Expert Validation: Use a TrueFlow airflow measurement plate or powered flow hood to verify delivered CFM matches the blower performance table for your measured external static pressure. Cross-reference against the AHRI-rated conditions for this specific combination.

The Professional Standard: Ensure the blower/coil assembly meets IECC/IRC insulation and air-sealing requirements for the cabinet. R-32 charge limits per ASHRAE 15 apply to the total indoor volume. Document the coil orientation (horizontal/upflow/downflow) and confirm condensate routing complies with local plumbing codes — the coil’s ¾” NPT drain connections must gravity-drain or connect to a condensate pump rated for A2L environments.

Key Benefits

  • High-Efficiency Rated Performance: This AHRI-certified system achieves 19.0 SEER2 and 8.5 HSPF2, delivering measurable energy savings compared to minimum-efficiency (14.3 SEER2) systems. The variable-speed inverter compressor in the GZV7SA3610 modulates capacity to match the actual load, reducing short-cycling and improving humidity control.
  • R-32 Low-GWP Refrigerant: R-32 has a Global Warming Potential (GWP) of 675 — approximately 68% lower than R-410A (GWP 2,088). This supports compliance with EPA AIM Act phase-down requirements and positions this system for long-term refrigerant availability. R-32 also has higher volumetric cooling capacity, meaning smaller charge quantities for equivalent performance.
  • ENERGY STAR® Cold Climate Certified: This combination meets the stringent ENERGY STAR Cold Climate criteria, verifying effective heating performance at outdoor temperatures down to 5°F. The GZV7SA3610 delivers 22,000 BTU/h at 5°F, maintaining heat pump operation well below typical balance points.
  • Quiet Operation with Sound Control: The GZV7SA3610 features a high-density compressor sound blanket, quiet digitally commutated fan motor, and field-selectable Quiet Mode with up to 3 sound levels (as low as 45 dBA). The side-discharge cabinet design with grille-style sound control further reduces perceived noise at the property line.
  • Diagnostic Intelligence & Communicating Control: The system includes a 7-segment LED display with fault code storage, proprietary Inside Intelligence for diagnostics, and full communicating capability requiring only two low-voltage wires between indoor and outdoor units. Compatible with the Goodman GTST connected thermostat for enhanced monitoring.

Technical Specifications

Specification Value
AHRI Certificate Number 215433923
System Type Central Heat Pump Split System with Evaporator Coil & Modular Blower
Nominal Capacity 3 Ton (36,000 BTU/h)
SEER2 19.0
EER2 10.5
HSPF2 8.5
Cooling Capacity (AHRI Rated) 35,000 BTU/h
Heating Capacity @ 47°F 35,000 BTU/h
Heating Capacity @ 5°F 22,000 BTU/h
Outdoor Unit: GZV7SA3610
Dimensions (W × D × H) 37” × 12⅝” × 39”
Equipment Weight 168 lbs
Voltage / Phase 208-230V / 1 Phase / 60 Hz
MCA / MOP 31.8A / 35A
Refrigerant Charge (Factory) 100 oz (⅜” liquid line, 15 ft)
Evaporator Coil: CAPEA4830D3
Dimensions (W × D × H) 24½" × 21" × 30"
Ship Weight 70 lbs
Configuration Upflow/Downflow
Connections (Liquid / Suction) ⅜" / ⅞" or 1⅛"
Modular Blower: MBVK20DP1X00
Dimensions (W × D × H) 24½" × 21" × 30"
Ship Weight 86 lbs
Blower Motor ¾ HP ECM (208/230V)
Note: See ‘Resources (System Manuals and Warranty)’ Tab above for full specifications.

Compliance & Environmental Data

Category Details
Refrigerant Type R-32 (Difluoromethane)
Refrigerant GWP 675 (vs. R-410A at 2,088 — 68% reduction)
ASHRAE Safety Classification A2L (Lower Flammability)
EPA Section 608 Requirement Technician certification required for handling R-32. Recovery equipment must be A2L-rated.
Regional Compliance All Regions (DOE 2023 minimum efficiency standards met). Verify local A2L adoption status with your AHJ.
ENERGY STAR® Status Cold Climate Certified; Most Efficient 2025 (when matched per ENERGY STAR system requirements)
Tax Credit Eligibility (IRA) May qualify for federal energy efficiency tax credits under 25C. Consult IRS guidance and a qualified tax professional for current eligibility and caps.
UL Compliance UL 60335-2-40 (applies to A2L refrigerant systems); ETL Listed
AHRI Certification Certificate #215433923

Warranty & Registration

  • GZV7SA3610 Heat Pump Condenser: 10-Year Parts Limited Warranty and 10-Year Unit Replacement Limited Warranty when registered online within 60 days of installation at www.goodmanmfg.com. If the compressor fails within the first 10 years, Goodman will furnish a new equivalent outdoor unit (one-time replacement). Without registration, warranty coverage is limited to 5 years on all parts. One-time Compressor Replacement coverage is available for years 11–99 through an ASURE Extend Service Plan (available from ASURE dealers). Online registration is not required in California, Florida, or Québec.
  • CAPEA4830D3 Evaporator Coil: 10-Year Parts Limited Warranty when registered online within 60 days of installation at www.goodmanmfg.com. Without registration, warranty coverage is limited to 5 years on all parts. Registration is not required in California, Florida, or Québec.
  • MBVK20DP1X00 Modular Blower: 10-Year Parts Limited Warranty when registered online within 60 days of installation at www.goodmanmfg.com. Without registration, warranty coverage is limited to 5 years on all parts.

All warranties provided by Daikin Comfort Technologies Manufacturing, Inc. Warranty applies to heating and air conditioning units installed in owner-occupied residences. Labor, refrigerant, freight, and associated installation costs are not covered. Refer to full warranty documents for complete terms, conditions, and exclusions.