1-800-315-4345
This Goodman Dual Fuel System pairs the GZV6SA1810A variable-speed inverter-driven heat pump condenser with the CHPEA2422B3 evaporator coil and the GDVT800803BX 80% AFUE gas furnace for comprehensive year-round heating and cooling. Rated at 19 SEER2 and 8.8 HSPF2 for the heat pump side, and 80,000 BTU input on the furnace, this 1.5-ton R-32 system delivers efficient performance in both moderate and extreme cold conditions. The dual fuel design automatically switches between electric heat pump operation and gas furnace heating based on outdoor temperatures, optimizing energy costs throughout the season. AHRI Certificate Number: 215439733. This system features a Low NOx furnace compliant with SCAQMD Rule 1111 for Southern California and other regulated air quality districts.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the 'Resources (System Manuals and Warranty)' Tab above on this page.
System Components
- GZV6SA1810A — Goodman 1.5-Ton Variable-Speed Inverter-Driven R-32 Heat Pump Condenser (19 SEER2 / 8.8 HSPF2 / 12 EER2)
- CHPEA2422B3 — Goodman Cased Horizontal Evaporator Coil with Internal EEV (22" W x 21" D x 17½" H, All-Aluminum, R-32 Optimized)
- GDVT800803BX — Goodman 80% AFUE 80,000 BTU Downflow/Horizontal Two-Stage Gas Furnace with Variable-Speed ECM Motor, Low NOx
Pro-Installer Tip
Technical Friction: The R-32 refrigerant in this system operates at slightly higher discharge pressures than R-410A, and the GZV6SA1810A's side-discharge configuration requires 12" minimum clearance on the discharge side. When paired with a Low NOx or Ultra Low NOx furnace in a California installation, combustion air intake routing can conflict with the condenser's required clearance envelope — particularly in tight side-yard setups common in Southern California tract homes.
Long-Term Prevention: Install a field-installed bi-flow filter drier on the liquid line and verify subcooling at 10±1°F at the service valve after the initial charge adjustment. Improper subcooling on a 1.5-ton inverter system leads to compressor liquid slugging at low-speed operation, which typically surfaces as a nuisance fault code 6–12 months post-install during mild shoulder-season conditions when the compressor runs at minimum speed.
Expert Validation: Use a digital manifold gauge (Testo 557s or equivalent) with R-32 pressure-temperature tables loaded — R-410A tables will not give accurate superheat/subcooling readings for this refrigerant. Verify the dual fuel switchover point is set correctly in the communicating thermostat; a common callback is the system defaulting to electric heat below 35°F when the furnace should be handling the load.
Professional Standard: R-32 systems require EPA Section 608 certification for handling. Ensure all flare connections are made with a calibrated torque wrench per manufacturer specifications — the GZV6S uses front-sealing service valves. In SCAQMD jurisdictions, verify the furnace NOx rating matches the local air quality district requirements before commissioning.
Key Benefits
- High-Efficiency R-32 Refrigerant: R-32 has a Global Warming Potential (GWP) of 675, approximately 68% lower than R-410A (GWP 2088), reducing the system's direct environmental impact while maintaining equivalent cooling and heating performance at 19 SEER2 / 8.8 HSPF2.
- Variable-Speed Inverter Compressor: The swing compressor in the GZV6SA1810A modulates capacity from minimum to maximum output, reducing temperature swings, improving humidity control, and lowering energy consumption compared to single-speed or two-stage systems during partial-load conditions.
- Quiet Operation with Quiet Mode: Normal operating sound level of 61 dBA, with a three-level Quiet Mode that can reduce sound output to as low as 40 dBA — suitable for installations near bedrooms, patios, or property lines with noise ordinance concerns.
- Cold Climate Heat Pump Capability: ENERGY STAR® Cold Climate certified, the GZV6SA1810A operates in heating mode down to -10°F ambient, providing 13,000 BTU/h at 5°F outdoor temperature for reliable heat pump operation in northern climates without auxiliary heat dependency.
- Dual Fuel Cost Optimization: Automatically transitions between heat pump operation (higher COP at moderate temperatures) and gas furnace heating (more economical at extreme cold) based on a field-adjustable switchover temperature, delivering the lowest combined operating cost across the full heating season.
- Two-Stage Gas Furnace: The 80% AFUE furnace operates at a low-fire setting for most of the heating season, engaging high-fire only during peak cold events — this reduces gas consumption and provides more even temperatures than single-stage operation.
- Electronic Expansion Valve (EEV): The EEV provides continuous, precise refrigerant metering that adjusts in real-time to changing load conditions — a significant upgrade over fixed-orifice pistons or standard TXVs for maintaining optimal system efficiency across the full operating range.
Technical Specifications
| AHRI Certificate Number | 215439733 |
| Outdoor Unit — GZV6SA1810A | |
|---|---|
| Cooling Capacity (AHRI Rated) | 17,100 BTU/h |
| Heating Capacity @ 47°F (AHRI Rated) | 17,400 BTU/h |
| Heating Capacity @ 5°F | 13,000 BTU/h |
| SEER2 | 19.0 |
| EER2 | 12.0 |
| HSPF2 | 8.8 |
| Compressor Type | Variable-Speed Swing |
| Refrigerant | R-32 |
| Expansion Device | EEV |
| Electrical | 208-230V / 1 Phase / 60 Hz |
| Min. Circuit Ampacity | 12.8A |
| Max. Overcurrent Protection | 15A |
| Dimensions (W x D x H) | 36⅝" x 13¾" x 27⅜" |
| Equipment Weight | 122 lbs |
| Sound Level (Cooling/Heating) | 61 / 61 dBA |
| Liquid / Suction Line | ⅜" / ¾" |
| Factory Refrigerant Charge | 74 oz |
| Evaporator Coil — CHPEA2422B3 | |
| Configuration | Horizontal, Cased |
| Cabinet Dimensions (W x D x H) | 22" x 21" x 17½" |
| Nominal Capacity | 2 Ton |
| Ship Weight | 56 lbs |
| Gas Furnace — GDVT800803BX | |
| AFUE | 80% |
| BTU Input | 80,000 BTU/h |
| Configuration | Downflow/Horizontal |
| Gas Valve | Two-Stage |
| Blower Motor | Variable-Speed ECM |
| Cabinet Width | 17½" |
| Emissions | Low NOx |
Note: See 'Resources (System Manuals and Warranty)' Tab above for full specifications.
Compliance & Environmental Data
| Refrigerant Type | R-32 |
| Refrigerant GWP | 675 (approximately 68% lower than R-410A) |
| Refrigerant Safety Classification | A2L (Mildly Flammable) |
| EPA 608 Certification Required | Yes — Required for purchase, handling, and servicing |
| AHRI Certified | Yes — Certificate #215439733 |
| ENERGY STAR® Certified | Cold Climate Certified |
| Regional Compliance | Meets DOE 2023 regional efficiency standards for all U.S. regions |
| ASHRAE 15 Compliance | Required — Charge limits apply for A2L refrigerant in occupied spaces |
| Emissions Compliance | Low NOx — Compliant with SCAQMD Rule 1111 (≤40 ng/J) |
| Federal Tax Credit Eligibility | This system may qualify for federal energy efficiency tax credits under the Inflation Reduction Act (IRA). Consult a qualified tax professional and visit energystar.gov for current eligibility requirements. |
Warranty & Registration
-
Outdoor Unit (GZV6SA1810A) Warranty:
- Unregistered: 5-Year Parts Limited Warranty
- Registered (within 60 days of installation at goodmanmfg.com): 10-Year Parts Limited Warranty and 10-Year Unit Replacement Limited Warranty
- Compressor: If the compressor fails within the first 10 years (registered unit), Goodman will furnish a new equivalent replacement unit at no charge (one-time)
- Optional: One-time compressor replacement coverage for years 11–99 available through an ASURE Extend Service Plan
-
Evaporator Coil (CHPEA2422B3) Warranty:
- Unregistered: 5-Year Parts Limited Warranty
- Registered (within 60 days of installation at goodmanmfg.com): 10-Year Parts Limited Warranty
-
Gas Furnace (GDVT800803BX) Warranty:
- Unregistered: 20-Year Heat Exchanger Limited Warranty + 5-Year All Other Parts Limited Warranty
- Registered (within 60 days of installation at goodmanmfg.com): Lifetime Heat Exchanger Limited Warranty (up to 99 years) + 10-Year Parts Limited Warranty + 10-Year Unit Replacement Limited Warranty (heat exchanger failure)
- If the heat exchanger fails within the first 10 years (registered unit), Goodman will furnish a new equivalent replacement unit at no charge (one-time)
Important: Online registration must be completed within 60 days of installation to receive the full extended warranty coverage. Registration is not required in California, Florida, or Québec. Warranty durations in Texas and Florida may differ. All warranties apply to owner-occupied residential installations only. Complete warranty details are available at goodmanmfg.com.
Let customers speak for us
I absolutely love how easy it is to use and how well they fit and look. Awesome!!
Excellent. Placed unit in a two room cabin with each inside unit on the same common wall. Outside temps were in the low 40’s and the cabin was quickly warmed.
Very easy to install, and with a little trouble shooting with help from tech. it was very quietly putting out ice cold air... Had a bad fuse in my disconnect....
This is a good air conditioner for the price. Our apartment living room and kitchen have been kept nice and cool. The complex we moved into actually already had these installed but I have been so happy with the performance I purchased one for my mom who lives in a tiny home, I'm an HVAC tech and it was about time to replace her HVAC. Yes, I recommend this.
We have zero regrets! No wait, one. That we didn’t get them sooner! We (my husband, self and 19yr old son) work outside noon-8am several days a week in Texas. It doesn’t matter how low you set your AC unit it’s just never enough and it just runs it into the ground. We finally decided to pull the plug. In my 40 years I’ve never slept so good. It’s like hotel good but in your own bed!!! Install was super easy because I watched him do it, LOL. I kid. I’ll ask for his install input and update but seriously he installed all 4 (3 bedrooms and 1 living room) in 2 days. Probably wouldn’t have taken so long if he didn’t have to pour a pad for them but it was well worth it! Last pic is from the Nest. They were installed Friday. Compare usage from Sat & Sun to before we got them! Insane!!!
This was best investment I've ever made. I put this on the wall on my porch that I've converted to a sun room. This extra space that I enclosed with plexiglass and wood and sealed with insulation stayed about 20 degrees different from out side. With a window unit and heaters. Now with the split unit it stays what ever temp I want it to be. The della split unit is so quite I have to put my ear on it to hear it run sometimes the out side unit is even quite. If you mount on outside wall that is a little thin and only a few inches thick it might give a little bit of a hum but so slight you have to want to hear it. Turbo cool or heat will cool or heat super fast. The system is perfect 👌 👍 🥰. I love it.
I live in Florida and our summers are brutal. I installed this in my garage.
It wasn’t a hard install but it took my dad and I about 8 hours. He ran the electrical.
Around this time of the year, my garage is around 82 degrees and +70% humidity, the air is very wet.
This morning it was 74” and 52% humidity.
The indoor and outdoor units are remarkably quieter compared to our house’s HVAC system.
I bought and installed 2 of the della mini splits in the last 8 months, one for my double wide 1800 sqf that I am remodeling little by little, and another for my daughters craftsman home. What an improvement! So silent! So efficient! So easy of operating. For the last 10+ years, we have been using windows AC units and radiant heaters after our central heat and air system broke. The suffering is over. We are saving $100 a month on the power bill and enjoying ourselves inside now. Our Great Pyrenees friends are enjoying the AC's too during the scorching hot summer days. They are pretty easy to install. Follow the instructions on the book and watch some videos on YouTube. On the second install, I made an electrical mistake and purchased the wrong breaker. I am only a landscaper by the way. No problem! I called the technical support number and a very nice tech called me back after just a few hours and figured it out by phone within 5 minutes. It is all great! We just keep it simple by using the remotes. I love the delay timer option. Now that the weather is cooling down (80's max), I set the timer so it doesn't come ON automatically before 12 pm. By the time the girls come from school, 75°f is back as set. GREAT PRODUCT, GREAT TECHNICAL SUPPORT
Installation was a breeze. Unit is working flawlessly. I love that it connected to my Alexa and I can voice control or use the Della app. I am going to purchase a second Della for our guest home.
Got these panels for my backyard as the wall for the Composting area. Black is good for absorbing the heat of the sun and is easy to hide the ugly things. It is a good quality product. The foot support is stainless steel and long enough to bind the ground and the panels. As it is with a good quality, it is just a little heavy, which may require two people to move around or install it.
Solid plastic material. Assembly was easy with a power screwdriver. Looks better than an ugly air conditioner unit.
Great value and just the right size. Note that if you want to place them in a straight line, you will need to use an electric screwdriver to tighten the screws.
Made from good quality materials. Very easy to install and assemble. Looks great to hide the trash bins. Would buy more for AC.
I use it to cover the trash can. It is very practical. This way you can't see the dirty surface of the trash can. I strongly recommend it.
Great product. Installation was very easy
What customers think about the store
Store offers excellent customer service with fast shipping and competitive pricing. Products arrive well-packaged and on time. Knowledgeable support staff assist with installations and technical questions. Customers appreciate quality HVAC systems, mini-splits...