This Goodman 2-Ton 19.2 SEER2 / 9.2 HSPF2 Central Heat Pump Split System with Evaporator Coil & Modular Blower pairs the GZV9S-series inverter-driven variable-speed heat pump condenser (Model: GZV9SA241C) with a cased upflow/downflow evaporator coil (Model: CAPEA4830D3) and a multi-positional communicating modular blower (Model: MBVK16CP1X00). This AHRI-certified matched system (Certificate #: 216699892) uses R-32 refrigerant and is ENERGY STAR® certified.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the 'Resources (System Manuals and Warranty)' Tab above on this page.
System Components
- GZV9SA241C – Goodman GZV9S-Series 2-Ton Variable-Speed Inverter-Driven R-32 Heat Pump Condenser, Side Discharge, up to 21.0 SEER2 / 10.0 HSPF2, 208-230V/1Ph/60Hz, EEV Expansion Device
- CAPEA4830D3 – Goodman CAPEA-Series 2-Ton Cased Upflow/Downflow Indoor Coil with Internal EEV, R-32 Optimized, All-Aluminum Evaporator, 24½" W x 21" D x 30" H
- MBVK16CP1X00 – Goodman MBVK-Series Multi-Positional Variable-Speed ECM Communicating Modular Blower, 21" W x 21" D x 30" H, 208/230V/1Ph/60Hz, ¾ HP Motor
Pro-Installer Tip: Modular Blower & Coil Stack Configuration
The Technical Friction: The two-piece coil and modular blower configuration requires precise alignment of the cased coil on top of the MBVK blower section. A misaligned joint creates air bypass that reduces effective capacity and increases operating noise. The MBVK16CP1X00 blower’s 21” depth matches the coil cabinet, but field conditions (unlevel surfaces, angled ductwork) can compromise the seal.
The Long-Term Prevention: Use the gasket kit (Part # 0154D20003S) to seal the coil-to-blower joint. Verify the connection is airtight with a smoke pencil or theatrical fog during blower operation. This prevents condensation dripping outside the drain pan path and eliminates ceiling stain callbacks in attic installations 6–12 months post-install.
The Expert Validation: Measure static pressure drop across the coil with a digital manometer at design airflow. Compare readings to the published airflow data in the MBVK specification sheet. If the drop exceeds published values by more than 15%, check for kinked refrigerant lines or coil blockage before completing the commissioning report.
The Professional Standard: R-32 requires EPA Section 608 certification. For R-32 compatibility with the MBVK blower, install the R-32 integration kit (Part # 0230K00044) if the blower was originally configured for R-410A. All local mechanical and electrical codes apply, including UL 60335-2-40 compliance for A2L refrigerant applications.
Key Benefits
- High-Efficiency Rated Performance: This matched system achieves up to 19.2 SEER2 and 9.2 HSPF2, verified under AHRI Certificate #216699892. The variable-speed inverter compressor modulates capacity to match the load, reducing energy waste compared to fixed-speed systems.
- Low-GWP R-32 Refrigerant: R-32 has a Global Warming Potential (GWP) of 675 — approximately 68% lower than R-410A (GWP 2,088). This aligns with EPA AIM Act phase-down requirements and positions the system for long-term refrigerant availability.
- Quiet Operation: The GZV9S outdoor unit operates at 71 dBA in normal cooling mode, with a selectable Quiet Mode that can reduce sound output to as low as 45 dBA — suitable for installations near bedrooms or property lines with noise ordinance constraints.
- All-Aluminum Evaporator Coil: The indoor coil uses an all-aluminum construction that eliminates galvanic corrosion between dissimilar metals, a known failure point in copper-aluminum coils exposed to high-humidity or coastal environments.
- 21” Cabinet Depth: Both the indoor coil and blower/air handler sections use a 21” depth cabinet, which fits through standard 22” attic access openings without requiring disassembly — reducing installation time and potential for field damage.
Technical Specifications
| Specification | Value |
|---|---|
| AHRI Certificate Number | 216699892 |
| System SEER2 | 19.2 |
| System HSPF2 | 9.2 |
| System Capacity | 2 Ton |
| Refrigerant | R-32 |
| Outdoor Unit Max Cooling (BTU/h @ 95°F) | 24,000 |
| Outdoor Unit Max Heating (BTU/h @ 47°F) | 24,000 |
| Outdoor Unit Max Heating (BTU/h @ 5°F) | 24,000 |
| System Heating Capacity (M1 BTU/h) | 22,000 |
| Outdoor Unit Dimensions (W x D x H) | 37" W x 12⅝" D x 56⁵⁄₁₆" H |
| Outdoor Unit Weight (Equipment) | 230 lbs |
| Outdoor Unit Sound (Cooling/Heating dBA) | 71 / 75 |
| Expansion Device | EEV (Electronic Expansion Valve) |
| Voltage (Outdoor Unit) | 208-230V / 1Ph / 60Hz |
| Coil-to-Furnace Fit | 1.75 |
| Note: See 'Resources (System Manuals and Warranty)' Tab above for full specifications. | |
Compliance & Environmental
| Category | Detail |
|---|---|
| Refrigerant Type | R-32 (A2L – Mildly Flammable) |
| Refrigerant GWP | 675 (vs. R-410A at 2,088) |
| EPA 608 Certification | Required for handling R-32 refrigerant |
| Safety Standard | UL 60335-2-40 Compliant |
| ENERGY STAR® | Certified |
| AHRI Certified | Yes – Certificate #{ahri} |
| Federal Tax Credit Eligibility | Consult a qualified tax advisor. Heat pump systems meeting CEE Tier requirements and installed by a qualified contractor may be eligible for federal tax credits under the Inflation Reduction Act (IRA) §25C, up to $2,000. |
Warranty & Registration
Each component in this system carries its own manufacturer warranty from Daikin Comfort Technologies Manufacturing, L.P. Online registration must be completed within 60 days of installation at www.goodmanmfg.com to receive the full warranty benefits. Details by component:
- Outdoor Unit (GZV9SA241C): If not registered: 5-Year Parts Limited Warranty. If registered within 60 days: 10-Year Parts Limited Warranty (for as long as the original registered owner resides in the home). Compressor failure within the first 10 years on a registered unit qualifies for a one-time full unit replacement. One-time Compressor Replacement coverage for years 11–99 is available through an ASURE Extend Service Plan.
- Evaporator Coil (CAPEA4830D3): If not registered: 5-Year Parts Limited Warranty. If registered within 60 days: 10-Year Parts Limited Warranty. Online registration must be completed within 60 days of installation.
- Modular Blower (MBVK16CP1X00): If not registered: 5-Year Parts Limited Warranty. If registered within 60 days: 10-Year Parts Limited Warranty. Online registration must be completed within 60 days of installation.
Note: Online registration is not required in California, Florida, or Québec. Warranty durations in Texas and Florida may differ. See complete warranty documents for full terms, limitations, and exclusions.
Let customers speak for us
What customers think about the store
Store specializes in HVAC systems and power solutions with competitive pricing and fast shipping. Customers praise responsive customer service, professional installation support, and product quality. Many report significant energy savings and appreciate DIY-fr...