This is a direct-replacement motor for Polar Cool 18" and 24" evaporative cooling fans built before 2014. If your older unit is running weak, noisy, or not spinning at all, this motor gets the fan blowing again.
This motor is a genuine Polar Cool replacement part built to restore airflow in older evaporative cooling fans. It is sized and wired to match the original equipment specification for pre-2014 18" and 24" models, so you get the same speed and power output the fan was designed around. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Speed: 1075 RPM
- Horsepower: 1/3 HP
- Frequency: 50/60 Hz
- Voltage: 120 volts
- Fits Polar Cool 18" and 24" evaporative cooling fan models manufactured prior to 2014
- Does NOT fit Polar Cool 18" or 24" fan models manufactured in 2014 or later
Key Benefits
- Genuine Polar Cool replacement component matched to original equipment specifications
- 1/3 HP motor rated for continuous cooling-fan duty
- 1075 RPM output sized for correct airflow on 18"/24" fan models
- Dual 50/60 Hz frequency compatibility
- Straightforward bolt-in replacement using the existing prop and housing
| Spec | Value | Unit |
|---|---|---|
| Speed | 1075 | RPM |
| Horsepower | 1/3 | HP |
| Frequency | 50/60 | Hz |
| Voltage | 120 | Volts |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Compatible with: Polar Cool 18" and 24" evaporative cooling fan models manufactured prior to 2014.
- NOT compatible with: Polar Cool 18" or 24" fan models manufactured in 2014 or later.
| Item | Detail |
|---|---|
| Electrical Safety | Disconnect power before servicing; confirm all wiring connections are tight and secure before restoring power |
| Installation Skill Level | Basic DIY skills |
FAQ
Will this motor fit my Polar Cool evaporative cooler?
It fits Polar Cool 18" and 24" fan models manufactured prior to 2014 only. It is not designed for units built in 2014 or later.
What is the voltage and frequency of this motor?
It runs on 120 volts at 50/60 Hz.
What horsepower and speed does this motor deliver?
It is rated at 1/3 HP and runs at 1075 RPM.
Can I install this motor myself?
Yes, it is designed for straightforward replacement. Disconnect power, remove the prop and old motor, install the new motor, reattach the prop, reconnect wiring, and test before restoring full power.
Warranty & Registration
Manufacturer warranty terms for this motor are not specified in the available data. [NEEDS VERIFICATION] Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for manufacturer warranty and registration details. Ask us before you order if you need help confirming coverage — we always reply back.
