This is a single replacement evaporative cooling pad for PolarCool 36" Pro fans and select Zone 11K models. Use it to swap out one hardened or damaged pad without buying a full pad kit.
PolarCool CELdek pads use an unequal flute design that balances cooling efficiency against airflow resistance. Over time, mineral scale and debris harden the pad media, which reduces water retention and cooling output. Replacing a single failed pad restores that section's evaporative surface without disturbing pads that are still performing well. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Pad dimensions: 48" H x 12" W x 6" D — verify this matches your existing pad before ordering.
- Fits PolarCool 36" Pro models and units with a 36" fan prop diameter.
- Fits PolarCool Zone 11K (36" gray rotomolded plastic model).
- Fits PolarCool 36" single speed and older direct drive models.
- Sold as a single pad (quantity: 1) — NOT a 4-pad kit. For a full kit, use SKU 6450-6014.
- Does NOT fit 36" units that use 8" thick pads. Those require SKU 6450-6010 instead.
Key Benefits
- Genuine PolarCool replacement pad built to OEM dimensions
- Unequal flute design supports high face velocity with low pressure drop
- Self-cleaning flute pattern flushes dirt and debris from the pad surface
- Algae-resistant substrate with optional MI-T-edg protective edge coating
- GREENGUARD Gold certified for low chemical emissions and reduced VOC levels
- Allows spot replacement of one damaged pad instead of a full kit swap
| Spec | Value | Unit |
|---|---|---|
| Height | 48 | in |
| Width | 12 | in |
| Depth | 6 | in |
| Quantity Included | 1 | pad |
| Price | 68.00 | USD |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Compatible with: PolarCool 36" Pro models.
- Compatible with: PolarCool Zone 11K (36" gray rotomolded plastic model).
- Compatible with: PolarCool 36" single speed and older direct drive models with 36" fan prop diameter.
- NOT compatible with: 36" units requiring 8" thick pads (use SKU 6450-6010).
- NOT sold as: a 4-pad kit (full kit is SKU 6450-6014, sold separately).
- Verify pad size and quantity needed before purchasing — mismatched thickness will not seat correctly.
Compliance & Environment
| Item | Detail |
|---|---|
| Indoor Air Quality Certification | GREENGUARD Gold Certified |
| Substrate Treatment | Algae-resistant substrate |
| Optional Edge Coating | MI-T-edg (algae/mineral resistant, UV protective) |
FAQ
Will this pad fit my PolarCool 36" Pro fan?
Yes. This pad is engineered for PolarCool 36" Pro models, the PolarCool Zone 11K (36" gray rotomolded plastic model), and PolarCool 36" single speed and older direct drive models with a 36" fan prop diameter.
What size is this cooling pad?
The pad measures 48 inches tall by 12 inches wide by 6 inches deep. It ships as a single pad, not a full kit.
Does this fit units that use 8-inch thick pads?
No. This pad is 6 inches deep. Some 36" units use 8" thick pads, which are sold separately under SKU 6450-6010. Verify your pad thickness before ordering.
Can I buy a full set of pads instead of one?
Yes. A kit of 4 pads is available under SKU 6450-6014. This listing (SKU 6450-6070) is for a single pad only, intended for spot replacement of one worn or damaged pad.
Is this pad safe for indoor air quality-sensitive spaces?
Yes. This pad is GREENGUARD Gold certified, meeting health-based criteria for low chemical emissions and reduced VOC levels.
Warranty & Registration
Manufacturer warranty terms for this pad are not included in the provided data. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for manufacturer warranty terms and registration details. Ask us before you order if you need help confirming your exact pad thickness or fan model — we always reply back.
