This is a genuine replacement pad kit for PolarCool 24" evaporative coolers — three CELdek cooling pads sized to restore water retention and cooling efficiency once your original media hardens with mineral buildup.
PolarCool's CELdek pads use an unequal flute design to balance cooling efficiency with airflow resistance. As pads age, hardened mineral deposits reduce water absorption and cooling output — swapping in fresh media brings a unit back to its original performance envelope. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Pad dimensions: 36" H x 12" W x 8" D — kit includes 3 pads per box.
- Engineered specifically for PolarCool 24" fan prop diameter models, which require a 36" tall pad.
- NOT engineered for PolarCool models outside the 24" fan prop family — confirm your unit's fan prop diameter and required pad height before ordering.
- Verify both pad size and quantity needed for your unit before purchasing; this is a set of 3 pads only.
- Suited for portable evaporative air coolers, outdoor cooling systems, and light industrial applications.
Key Benefits
- CELdek pad construction delivers high cooling efficiency through its unequal flute design.
- High face velocity tolerance supports high-velocity fans without water droplet carryover.
- Self-cleaning flute geometry flushes dirt and debris from the pad surface during operation.
- Low pressure drop design allows air through the pad without significant resistance.
- Algae-resistant substrate treatment, with optional MI-T-edg edge protection for extended service life.
- GREENGUARD Gold Certified for low chemical emissions, suitable for indoor air quality-sensitive spaces.
| Spec | Value | Unit |
|---|---|---|
| Pad Height | 36 | in |
| Pad Width | 12 | in |
| Pad Depth | 8 | in |
| Pads Per Box | 3 | count |
| Fan Prop Diameter Compatibility | 24 | in |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: PolarCool 24" fan prop diameter models requiring a 36" tall pad.
- Does NOT fit: PolarCool models outside the 24" fan prop family, or any unit requiring a pad height other than 36".
- Suitable for portable evaporative air coolers, outdoor cooling systems, and light industrial applications.
Compliance & Environment
| Item | Detail |
|---|---|
| Air Quality Certification | GREENGUARD Gold Certified |
| Substrate Treatment | Algae-resistant, specially treated substrate |
| Optional Edge Treatment | MI-T-edg — nonporous, quick-drying, UV and weather-resistant edge coating |
FAQ
Will this pad kit fit my PolarCool 24" model?
Yes, this kit is engineered specifically for PolarCool 24" fan prop models, which use a 36" tall pad. Verify your unit's fan prop diameter before ordering, since pad sizing is model-specific.
What are the exact pad dimensions?
Each pad measures 36" H x 12" W x 8" D. The kit includes 3 pads in one box.
Does this kit fit coolers other than PolarCool 24" models?
No. This kit is sized for PolarCool 24" fan prop diameter models only. Do not use it on other PolarCool sizes or on other brands' coolers without confirming pad dimensions match.
Are these pads treated for algae and UV resistance?
The pads use a specially treated, algae-resistant substrate. An optional MI-T-edg edge treatment is also available, which adds resistance to algae, mineral buildup, and UV degradation.
Can I service the cooler while these pads are installed?
Yes, routine maintenance can typically be performed while the system is still operating, according to the manufacturer.
Warranty & Registration
Manufacturer warranty terms for this pad kit are not detailed in the data provided [NEEDS VERIFICATION]. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for full manufacturer warranty documentation, or ask us before you order if you need clarification.
