This is a wall-sleeve air conditioner and heater for hotel rooms, apartments, or additions where central ductwork isn't available. It's built for property managers and homeowners who need self-contained, per-room climate control with a factory-installed electric heat strip.
Amana's PTC093J25AXXX pairs a 9,200/9,000 BTU cooling chassis with a factory-installed 2.5/2.1 kW electric heat strip, sized for hospitality rooms, multifamily units, and additions that need self-contained, per-room comfort without ductwork. The chassis carries R-32 refrigerant and meets or exceeds ASHRAE 90.1 efficiency standards. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fit & Power Requirements
- Wall sleeve opening: industry-standard 42 in wide x 16-1/16 in high, 14 in standard depth (e.g. WS900E / WS900QW family).
- Voltage: 230/208V. Operates within 197V minimum / 253V maximum per manufacturer voltage limits.
- Amperage with heater: 11.2/10.1A total; MCA 14.1A; MOP (breaker/fuse) 15A.
- Power cord: factory-installed NEMA 6-15P plug with LCDI device per UL 484 (standard on all units under 250V).
- Wall Sleeve is NOT included and must be ordered separately.
- Exterior Architectural Grille is NOT included and must be ordered separately.
- Not compatible with 115V circuits.
- Not compatible with 265V hardwire or sub-base applications — that requires the 265V commercial sibling chassis (PTC094J) with its own sub-base/hard-wire kit.
- Not a drop-in fit for non-standard or custom wall sleeve openings.
Key Benefits
- 2/1-speed cooling performance rated at 12.1/12.2 EER for efficient room-level conditioning.
- Removes up to 2 pints of moisture per hour for humidity control in guest rooms or living spaces.
- Built-in fresh air vent (65 CFM) for make-up air without opening a window.
- Factory-installed 2.5/2.1 kW heat strip delivers 8,500 BTU (230V) / 6,800 BTU (208V) of supplemental heat.
- R-32 refrigerant chassis meets or exceeds ASHRAE 90.1 efficiency requirements.
- Standard 230/208V plug-and-play electrical — no hardwiring or sub-base required for this configuration.
| Spec | Value | Unit |
|---|---|---|
| Cooling Capacity | 9,200/9,000 | BTU/h |
| Heating Capacity (230V) | 8,500 | BTU/h |
| Heating Capacity (208V) | 6,800 | BTU/h |
| Electric Heat Strip Size | 2.5/2.1 | kW |
| Heat Stages | 1 | - |
| Voltage | 230/208 | V |
| Compressor Amps | 4.1/4.1 | A |
| Compressor Watts | 760/750 | W |
| Total Heat Watts | 2,570/2,115 | W |
| Total Amps (with Heater) | 11.2/10.1 | A |
| Minimum Circuit Ampacity (MCA) | 14.1 | A |
| Maximum Overcurrent Protection (MOP) | 15 | A |
| NEMA Plug Type | 6-15P | - |
| EER | 12.1/12.2 | BTU/Wh |
| CFM Wet High/Low | 290/264 | CFM |
| CFM Dry High/Low | 321/295 | CFM |
| Fresh Air Vent CFM | 65 | CFM |
| Dehumidification | 2 | pints/hr |
| Net Weight | 102 | lb |
| Shipping Weight | 117 | lb |
| Refrigerant Type | R-32 | - |
| Wall Sleeve Dimensions | 42 x 16-1/16, 14 depth | in |
| Wall Sleeve Included | Not Included | - |
| Exterior Architectural Grille Included | Not Included | - |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits the industry-standard 42 in wide x 16-1/16 in high wall sleeve opening, 14 in standard depth (e.g. WS900E / WS900QW sleeve family).
- Compatible with 230/208V circuits via the factory-installed NEMA 6-15P plug.
- Not compatible with 115V circuits.
- Not compatible with 265V hardwire or sub-base configurations — for 265V commercial applications, use the PTC094J sibling chassis with the required Amana sub-base (PTSB4**E) or hard-wire kit PTPWHWK4 with disconnect PSHW04A (all sold separately, and not applicable to this 230/208V unit).
- Not a drop-in replacement for non-standard or custom sleeve openings.
- Wall Sleeve and Exterior Architectural Grille are sold separately and are NOT included with this unit.
| Spec | Value |
|---|---|
| Refrigerant Type | R-32 |
| Efficiency Standard | Meets or exceeds ASHRAE 90.1 |
| Electrical Cord Compliance | LCDI power cord per UL 484 (units under 250V) |
| Voltage Operating Range | 197V minimum / 253V maximum |
FAQ
Is the wall sleeve included with this unit?
No. The wall sleeve is sold separately. This PTAC chassis fits the industry-standard 42 in wide x 16-1/16 in high opening (14 in standard depth, e.g. WS900E / WS900QW sleeve family), but you must order the sleeve and exterior grille independently.
What breaker size and plug type does this unit require?
This configuration ships with a factory-installed NEMA 6-15P plug and LCDI cord per UL 484 (standard on all units under 250V). Minimum Circuit Ampacity is 14.1A, with a maximum overcurrent protection (breaker/fuse) rating of 15A. Total operating amps are 11.2/10.1A at 230V/208V respectively.
Can this be hardwired for 265V commercial applications?
No. This is a 230/208V unit and is not rated for 265V circuits. 265V installations require the 265V commercial chassis (e.g., the PTC094J sibling in this family) paired with an Amana sub-base (PTSB4**E series) or hard-wire kit PTPWHWK4 with disconnect switch PSHW04A, none of which are compatible with or included with this 230/208V model.
Will this fit a standard 42-inch by 16-inch wall sleeve opening?
Yes. This chassis is designed for the industry-standard 42 in wide x 16-1/16 in high wall sleeve opening (standard 14 in depth). It is not a drop-in fit for non-standard or custom sleeve openings.
Does this require a licensed electrician or HVAC professional to install and keep the warranty valid?
[NEEDS VERIFICATION] — installer licensing requirements are not specified in the provided catalog data. Refer to the manufacturer warranty document in the Resources tab for exact installation and registration requirements.
Warranty & Registration
This unit carries a manufacturer 1-Year Repair/Replace warranty and a 5-Year Parts Limited Warranty, per Amana's published warranty badge terms. Exact terms, exclusions, and any distinction between residential and commercial/hospitality usage live in the manufacturer warranty document — refer to the "Resources (System Manuals and Warranty)" Tab above on this page for full terms before installation or registration.
