The PowerLift Pro is a drill-powered lifting jack that helps you position heavy wall-mounted equipment, like battery cabinets or inverters, without a second set of hands. It's built for installers who need to raise and hold heavy units steady during mounting.
The PowerLift Pro is a mechanical installation accessory, not an electrical component. It carries no AC output, DC battery voltage, or PV/MPPT specifications, and no UL 1741, UL 458, or IEEE 1547 electrical interconnection listings apply to this product category. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Lifting & Use Requirements
- Maximum rated load: 441 lbs (200 kg).
- Unit height: 60 inches; maximum lift height: 31.9 inches.
- Driven by a standard power drill — no proprietary motor or battery pack included with the lift itself.
- NOT an electrical inverter, charger, or monitoring device — carries no AC output, DC battery voltage rating, or PV input specification.
- NOT rated for loads exceeding 441 lbs (200 kg).
- Power drill NOT included.
Key Benefits
- Rated to lift and hold up to 441 lbs (200 kg) with stable, consistent lift power.
- Drill-driven operation reduces physical exertion versus manual jacks or straps.
- Compact 60-inch footprint suited for tight equipment rooms and mechanical closets.
- 31.9-inch maximum lift height covers typical wall-mount installation ranges.
- Supports solo or small-crew installs, reducing the need for a second lifter.
| Spec | Value | Unit |
|---|---|---|
| Maximum Load Capacity | 441 (200) | lbs (kg) |
| Unit Height | 60 | in |
| Maximum Lift Height | 31.9 | in |
| Drive Method | Standard power drill | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Designed for wall-mount installation applications, including lifting battery cabinets and similar equipment into position.
- Operated with a standard power drill — no special motor unit required.
- NOT rated to lift loads above 441 lbs (200 kg).
- NOT a substitute for permanent code-compliant wall mounting brackets or hardware.
- Power drill NOT included with purchase.
| Category | Detail |
|---|---|
| Product Type | Mechanical lifting accessory (Accessories category) |
| Electrical Listings | Not applicable — non-electrical product |
| NEMA Enclosure Rating | [NEEDS VERIFICATION] |
FAQ
What is the maximum weight the PowerLift Pro can lift?
The PowerLift Pro handles up to 441 lbs (200 kg) with stable, consistent lift power.
Do I need a special tool to operate this lift?
No. It operates using a standard power drill for smooth, drill-driven lifting.
What is the maximum lift height?
The unit stands 60 inches tall and reaches a maximum lift height of 31.9 inches.
Is this an electrical product like an inverter or charger?
No. The PowerLift Pro is a mechanical lifting accessory. It has no AC/DC electrical specifications, battery voltage input, or UL electrical listings.
Warranty & Registration
Manufacturer warranty terms for the PowerLift Pro are not included in the provided data. Refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the manufacturer's warranty documentation and registration process. [NEEDS VERIFICATION]
