This is the wall mounting bracket for the Fortress Power eForce 9.6kWh battery module — the hardware that secures your eForce battery to a wall instead of a floor stand, for installers working with limited floor space.
Fortress Power designed the eForce battery as a modular, stackable LFP system rated for 8,000+ cycles, built to run in demanding field conditions from residential garages to off-grid Alaska homesteads. A wall mount is the alternative to floor-standing the battery module, and it needs to be matched to the exact chassis it's holding — get this wrong and you risk an unsupported load on a wall stud, not just a fitment headache. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
- Fits: Fortress Power eForce 9.6kWh LFP battery module (15-cell configuration) only.
- Does NOT fit: eVault MAX, eFlex MAX, or eBoost batteries — these use a 16-cell configuration and a different housing profile than the eForce.
- Part type: Wall mounting bracket accessory (not a floor stand or rack).
- Weight rating, bolt pattern, and hardware dimensions: [NEEDS VERIFICATION] — not included in manufacturer data provided.
Key Benefits
- Purpose-built for the eForce 9.6kWh module — not a universal or aftermarket bracket.
- Supports a space-saving wall installation as an alternative to floor-standing the battery tower.
- Matches the eForce system's modular design philosophy, keeping mounting hardware consistent across a stacked install.
- Backed by Fortress Power's documentation set — full installation instructions available in the Resources tab.
| Spec | Value | Unit |
|---|---|---|
| Compatible Battery | eForce 9.6kWh LFP module (15-cell) | — |
| Battery Capacity (per module) | 9.6 | kWh |
| Rated Cycle Life | 8,000+ | cycles |
| SKU | EFORCEWALLMOUNT | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: Fortress Power eForce 9.6kWh battery module, the 15-cell LFP unit used in the eForce modular energy storage system.
- Does NOT fit: Fortress Power eVault MAX, eFlex MAX, or eBoost batteries, which use a 16-cell configuration and a differently sized enclosure.
- Intended for use alongside the eForce eWay wireway and Envy True 12kW inverter tower configuration, but this bracket mounts the battery only — it is not a mount for the inverter or eWay.
| Item | Rating / Note |
|---|---|
| UL Listing | [NEEDS VERIFICATION] — not stated in manufacturer data for this bracket |
| NEC Ampacity Reference | Not applicable — this is a mechanical mounting accessory, not a current-carrying component |
| IP / Outdoor Rating | [NEEDS VERIFICATION] — eForce battery enclosure is described as all-weather/outdoor-rated; bracket-specific rating not provided |
FAQ
Does this wall bracket fit the Fortress Power eVault MAX or eFlex MAX batteries?
No. This bracket is built specifically for the eForce battery module. The eVault MAX, eFlex MAX, and eBoost batteries use a 16-cell configuration and different housing dimensions than the eForce's 15-cell design, so this bracket is not rated or drilled to mount them.
Is this bracket rated for the full eForce stack (up to 16 batteries)?
[NEEDS VERIFICATION] The manufacturer data confirms the eForce system can scale to 16 battery modules (153kWh) in a stacked, floor-mounted configuration. Weight capacity and mounting count specific to the wall bracket are not stated in available source documentation. Confirm with the Resources tab or Fortress Power before wall-mounting multiple units.
Can I install this bracket outdoors?
The eForce battery itself carries an all-weather, outdoor-rated enclosure with built-in temperature-controlled heating. Specific outdoor durability ratings (IP rating, hardware corrosion resistance) for the wall bracket itself are not listed in available manufacturer data. [NEEDS VERIFICATION]
What hardware or tools do I need to install this bracket?
Mounting hardware specifications (bolt sizes, wall anchor type, stud spacing) are not detailed in the manufacturer data provided. Refer to the installation manual in the Resources tab for torque specs and anchor requirements before installing.
Warranty & Registration
Manufacturer warranty terms for this wall mounting bracket are not detailed in the data provided. Refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the full Fortress Power warranty documentation applicable to eForce system accessories. Contact MSSD before ordering if you need warranty terms confirmed in writing — we always reply back.
