Output generated

```json { "title": "HVAC Mirage 48,000 BTU 17.3 SEER2 Concealed Duct Ceiling Single-Zone Mini Split System 208-230V IVADH481A / OVADH481A", "body_html": "

The HVAC Mirage 48,000 BTU Central Air Handler Split System provides whole-home variable-speed comfort and efficiency. Designed as a direct replacement for traditional ducted systems, it pairs a high-efficiency inverter condenser with a central air handler for powerful cooling and heating.

\n\n\n

This complete turn-key system leverages an inverter-driven compressor to adapt smoothly to your home's thermal load, minimizing energy waste compared to single-stage units. The central air handler is designed for standard ducted applications, allowing you to use existing ductwork while upgrading to 17.3 SEER2 efficiency. Utilizing the low-GWP R-454B refrigerant, this system ensures EPA AIM Act compliance while delivering reliable, variable-speed comfort.

\n\n

Installation Requirements & Accessories

\n

\n
• Electrical Power: Requires a dedicated 208-230V, single-phase circuit.
\n
• Line Set Size: Requires a 3/8\" Liquid x 7/8\" Suction copper line set (NOT included).
\n
• Professional Installation Required: This system is NOT a DIY kit and requires a licensed HVAC technician for installation.
\n
• Exclusions: Line set NOT included. Mounting brackets and equipment pads NOT included.
\n

\n

Pro-Installer Tip

\n

When connecting the 3/8\" and 7/8\" copper line sets to this central air handler system, always pull a deep vacuum below 500 microns. This prevents non-condensables from degrading the R-454B refrigerant and ensures long-term compressor reliability. Use a digital micron gauge at the condenser service valves to confirm a vacuum hold. Following this EPA Section 608 standard protects your 7-Year Compressor Warranty and prevents premature variable-speed compressor failure.

\n

Key Benefits

\n

\n
• High Capacity: 48,000 BTU (4.0 Ton) capacity handles large whole-home applications.
\n
• Energy Efficient: 17.3 SEER2 rating delivers significant savings over older central systems.
\n
• Future-Proof Refrigerant: Uses R-454B, an EPA AIM Act compliant low-GWP refrigerant.
\n
• Turn-Key Package: Includes matched indoor air handler and outdoor inverter condenser.
\n

\n

Technical Specifications

\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Specification	Details
Cooling Capacity	48,000 BTU/h (4.0 Ton)
Efficiency Rating	17.3 SEER2
Electrical Supply	208-230V / 60Hz 1Ph
Line Set Connections	3/8\" Liquid x 7/8\" Suction
Indoor Unit Architecture	Concealed Duct Ceiling / Central AHU
DIY Status	No \u2014 Professional Installation Required

\n

Compatibility & Fitment

\n

\n
• Compatible with dedicated 208/230V single-phase electrical circuits.
\n
• Compatible with standard residential central ductwork systems.
\n
• Not Compatible with 115V-only circuits.
\n
• Line set NOT included.
\n

\n

Frequently Asked Questions

\n

\n

Is professional installation required to keep the warranty valid, or is this a true DIY kit?

\n

This system requires professional installation to maintain the 7-Year Compressor and 5-Year Parts Limited Warranty. It is not a DIY kit.

\n

Is the line set included, and if not, what size do I need to buy?

\n

The line set is not included. You will need a copper line set with 3/8-inch liquid and 7/8-inch suction connections.

\n

What breaker size do I need for this system?

\n

[NEEDS VERIFICATION]

\n

\n

Compliance & Warranty

\n

This system comes with a 7-Year Compressor and 5-Year Parts Limited Warranty. To validate the warranty, installation must be performed by a licensed HVAC professional in accordance with EPA regulations.

\n" } ```