The HVAC Mirage 9,000 BTU 19 SEER2 Polaris Series Air Handler (IPWH090C) is a high-performance indoor component designed for efficient, quiet comfort in residential or commercial single-zone applications.
The HVAC Mirage POLARIS series features variable-speed comfort through advanced inverter technology. This specific listing is for the indoor wall-mounted unit only, making it ideal for replacements or custom configuration when paired with a matching 110V Polaris outdoor condenser.
Indoor Air Handler
Wireless Remote Control
Installation Requirements & Accessories
- Voltage: 110V (115V / 60Hz 1Ph)
- Required Line Set: 3/8" Liquid x 7/8" Suction
- Not Included: Outdoor condenser and copper line sets are NOT included.
- Not Compatible: Not compatible with 208/230V circuits or systems.
Pro-Installer Tip: To prevent leaking flare connections and ensure optimal system performance on this non-DIY system, always use a Digital Torque Wrench when securing the 3/8" and 7/8" copper line sets. Proper torquing, combined with pulling a deep vacuum below 500 microns for 15 minutes before opening service valves, eliminates the risk of refrigerant loss. Furthermore, always use 14/4 AWG stranded wire between the indoor and outdoor sections to prevent "E1" communication codes. Installation must comply with EPA 608 mandates for handling R-454B refrigerant.
Key Benefits
- Variable Speed Comfort: Inverter technology ensures precise temperature control and energy efficiency.
- Eco-Friendly Refrigerant: Utilizes R-454B, a Low-GWP 2026 Mandate Compliant refrigerant.
- High Efficiency: Rated at an impressive 19 SEER2 for significant energy savings.
- Quiet Operation: Designed for minimal noise output in residential or commercial settings.
Technical Table
| Attribute | Specification |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| SEER2 | 19 |
| Voltage | 110V |
| Indoor Unit Architecture | Wall Mounted |
| DIY Status | No — Professional Installation Required |
| Line Set Connection | 3/8" Liquid x 7/8" Suction |
Compatibility & Fitment
- Compatible: Must be paired with a compatible 110V HVAC Mirage Polaris outdoor condenser.
- Not Compatible: Not compatible with 208/230V-only circuits.
- Not Included: Outdoor condenser, line set, and mounting hardware are NOT included.
Frequently Asked Questions
- Is professional installation required to keep the warranty valid, or is this a true DIY kit?
- Professional installation is required. This is not a DIY kit. It requires a licensed professional for installation and torquing flare fittings to factory specifications, pulling a vacuum, and proper electrical wiring to maintain the warranty.
- What voltage is required for this air handler?
- This air handler operates on 110V (115V / 60Hz Single Phase) power supply.
- Is the line set included?
- No, the line set is not included. You will need a 3/8" Liquid x 7/8" Suction line set for this unit.
Compliance & Warranty
Includes a 7-Year Compressor / 5-Year Parts Limited Warranty. Registration is required. Professional installation by a licensed HVAC technician is mandatory to keep the warranty valid. This unit uses R-454B low-GWP refrigerant, compliant with 2026 EPA mandates.
4 Reviews Hide Reviews Show Reviews
-
Smooth Installation & Fast Shipping
Arrived well packaged on a pallet. All components were clearly labeled. System started up immediately upon vacuum leak test and charge release.
-
Great Value Direct from Manufacturer
Compared this model to higher priced brands and could not be happier. Clean aesthetic, high SEER2 efficiency, and clear submittal sheets. Fast order processing.
-
Outstanding Heating Capacity in Cold Weather
We bought this unit for supplemental heating in our garage workspace. It ran flawlessly all winter through sub-zero temperatures. Great build quality and technical documentation.
-
Extremely Quiet & Efficient Heat Pump
Installed this system in my home office. It is whisper quiet inside and cools the room down in under 5 minutes. Shipping from Mini Split Systems Direct was fast with liftgate delivery included.
