This kit gives you a lithium replacement for the lead-acid batteries in your 24V scissor lift, floor scrubber, pallet jack, or similar light industrial equipment. It pairs two 24V EAGLE 2 LiFePO4 batteries with a counterweight system so the swap doesn't change how your equipment sits or handles.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Why This Kit Exists
Scissor lifts and similar equipment rely on the weight of their lead-acid batteries for stability, not just power. Swapping in lighter lithium batteries without accounting for that weight can change how the equipment balances. This kit addresses that directly: it includes a counterweight engineered to bring total kit weight back in line with the batteries it replaces, so you get the runtime and cycle-life benefits of LiFePO4 without altering the equipment's stability characteristics.
Battery Characteristics
Chemistry: LiFePO4 (Lithium Iron Phosphate). This kit uses two 24V EAGLE 2 batteries, built in the GC2 (golf cart) form factor as a direct physical replacement for T-105/T-104-style lead-acid batteries. Each 24V EAGLE 2 battery weighs 33 lbs. The kit also includes counterweights, each weighing 91 lbs, to bring total kit weight to a minimum of 248 lbs, matching the weight of the four Trojan T-104 lead-acid batteries it's designed to replace (62 lbs x 4 = 248 lbs total).
Wiring & Configuration Limits
This is a 24V kit built from two 24V EAGLE 2 batteries. It is designed for 24V applications as specified by the manufacturer. [NEEDS VERIFICATION] on series/parallel wiring diagram details, BMS max continuous discharge/charge amps, peak discharge rating, cycle life figure, cell balancing communication behavior (kit is labeled "No Comm"), and cold-weather/low-temperature charging protection — none of these figures are provided in the source data.
Do not mix this kit with lead-acid batteries in the same bank. Do not mix EAGLE 2 batteries of different ages or wear levels in the same string.
Pro-Installer Tip
Lead-acid scissor lift batteries fail gradually as plates sulfate, giving operators a false sense of remaining capacity. LiFePO4 packs behave differently — once the BMS hits its low-voltage cutoff, output stops abruptly rather than tapering off. Because this kit is labeled "No Comm," the batteries do not share balancing data across the pair the way a communicating bank might. To prevent cell imbalance between the two batteries over time, check pack voltages independently with a shunt-based battery monitor at each service interval rather than assuming they age identically. Whatever the eventual duty cycle looks like for your equipment, stay within the manufacturer's stated depth-of-discharge limit for these cells — do not assume it matches the 50% DoD standard used for lead-acid deep-cycle batteries. Confirm the actual DoD rating in the manufacturer documentation before setting operator run-time expectations.
Key Benefits
- GC2 form factor matches T-105/T-104 lead-acid battery footprint for drop-in physical replacement.
- Counterweight system preserves equipment stability by matching total lead-acid replacement weight (248 lbs minimum).
- Lighter individual battery units (33 lbs each) ease handling during service versus a 62 lb lead-acid unit.
- Designed for 24V light industrial equipment: floor sweepers, floor scrubbers, pallet jacks, scissor lifts, light towers, and Class A/B/C RVs and camper vans.
Technical Table
| Spec | Value |
|---|---|
| Chemistry | LiFePO4 |
| System Voltage | 24V |
| Battery Count in Kit | 2x 24V EAGLE 2 batteries |
| Weight per EAGLE 2 Battery | 33 lbs |
| Weight per Counterweight | 91 lbs |
| Minimum Total Kit Weight | 248 lbs |
| Lead-Acid Reference Weight (4x Trojan T-104) | 248 lbs (62 lbs x 4) |
| Form Factor | GC2 |
| SKU / Model | K0938 |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
This kit is designed as a physical, weight-matched replacement for T-105-style lead-acid batteries in 24V light industrial equipment, including floor sweepers, floor scrubbers, pallet jacks, scissor lifts, light towers, and Class A, B, and C RVs and camper vans, as well as emergency backup use.
It is NOT a drop-in replacement for 12V or 36V/48V systems — this kit is built specifically for 24V applications. Standard lead-acid chargers are NOT confirmed compatible; [NEEDS VERIFICATION] on charger requirements, as no charger specification was provided in the source data. Do not assume this kit includes cell-to-cell communication hardware beyond what "No Comm" implies — the source data does not detail any BMS communication bus for this configuration.
FAQ
What does "No Comm" mean in the kit name?
It indicates this kit configuration does not include the communication/balancing bus setup found in other EAGLE 2 kit variants. [NEEDS VERIFICATION] on the specific technical implications for your equipment's charging system.
Why does this kit include counterweights?
Scissor lifts and similar equipment depend on battery weight for stability. Lithium batteries weigh less than the lead-acid batteries they replace, so this kit includes counterweights to bring total weight back up to 248 lbs, matching four Trojan T-104 lead-acid batteries.
What equipment is this kit designed for?
24V applications including floor sweepers, floor scrubbers, pallet jacks, scissor lifts, light towers, Class A/B/C RVs, camper vans, and emergency backup use.
Can I mix this kit with my existing lead-acid batteries?
No. Do not mix LiFePO4 batteries with lead-acid batteries in the same bank.
What is the cycle life of the EAGLE 2 batteries in this kit?
[NEEDS VERIFICATION] — cycle life was not specified in the manufacturer data provided for this kit.
Warranty & Support
Refer to the "Resources (System Manuals and Warranty)" tab above for the manufacturer's warranty terms on this kit. If you have questions about fitment for your specific scissor lift or equipment model before you order, ask us — we always reply back.
