This is a 10-inch, 4AWG battery cable with ring terminals crimped on both ends, built for short jumper runs between batteries or busbar connections. It's for anyone assembling or servicing a BigBattery ESS setup who needs a fixed-length, factory-terminated jumper instead of cutting and crimping their own cable.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
A 4AWG conductor at a 10-inch length is sized for short jumper runs where voltage drop is minimal by design, not for long parallel runs. Ring terminals crimped at both ends give you a bolt-on connection at busbars or battery terminals without field crimping. Confirm your terminal bolt/stud size fits the ring terminal on this cable before you order.
- Conductor gauge: 4AWG
- Overall length: 10 inches, ring to ring
- Termination: Ring terminal on both ends
- Primary SKU: CBL079
- NOT specified for lengths other than 10 inches \u2014 do not stretch or splice to extend reach
- NOT rated for a stated voltage class in manufacturer data \u2014 confirm your system's voltage before install [NEEDS VERIFICATION]
- NOT a substitute for OEM-specified cables where lug size or gauge differs from 4AWG ring termination
- Ring terminals installed at both ends \u2014 no field crimping required for this length
- 4AWG copper conductor gauge as manufactured
- Fixed 10-inch length for consistent, repeatable jumper installs
- Factory-terminated build reduces variability versus DIY-crimped cables
| Spec | Value | Unit |
|---|---|---|
| Gauge | 4 | AWG |
| Length | 10 | inches |
| Termination (both ends) | Ring Terminal | \u2014 |
| SKU | CBL079 | \u2014 |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
- Fits: BigBattery ESS installations calling for a 4AWG, 10-inch, ring-to-ring jumper cable
- Fits: Busbar-to-terminal or terminal-to-terminal connections where ring bolt size matches
- Does NOT fit: Installations requiring lengths other than 10 inches
- Does NOT fit: Terminal styles other than ring-to-ring (no lug, no bare wire, no other connector documented)
- Not confirmed for any specific voltage class \u2014 verify against your system before use [NEEDS VERIFICATION]
| Compliance/Environment Item | Value |
|---|---|
| UL Listing | [NEEDS VERIFICATION] |
| NEC Ampacity Rating | [NEEDS VERIFICATION] |
| IP Rating | [NEEDS VERIFICATION] |
FAQ
What gauge is this cable?
This cable is 4AWG copper conductor, terminated with ring connectors on both ends.
How long is this cable?
It measures 10 inches (ring to ring). It is not available in other lengths per this listing.
Is this cable rated for 48V systems?
Voltage rating is not published by the manufacturer for this cable. [NEEDS VERIFICATION] before assuming compatibility with any specific system voltage.
Does this fit any battery brand, or only BigBattery?
This is sold as a BigBattery accessory cable. Fitment onto other manufacturers' terminals depends on matching ring/lug size, which is not specified here \u2014 confirm before ordering.
Warranty & Registration: Manufacturer warranty terms for this cable are not detailed in the provided data. [NEEDS VERIFICATION] \u2014 please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for manufacturer warranty documentation. Ask us before you order if you need this confirmed in writing.
