This is a 48-inch, 240V industrial evaporative cooler built to move air and cool large open spaces like warehouses, distribution centers, and manufacturing floors — it's for facilities that need real airflow across thousands of square feet without the cost of central air conditioning.
The PolarCool 48" (240V), Part No. 6622-1300, is built for industrial and large commercial cooling — warehouses, manufacturing floors, distribution centers, and similar open spaces where standard air conditioning is impractical or too costly to run continuously. Its galvanized steel frame and black powder coat finish are designed for demanding shop-floor and warehouse conditions. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
System Components
- Single-speed fan for consistent, straightforward operation
- Evaporative cooling pad media with coated edges for extended service life
- Galvanized steel housing with black powder coat finish
- Heavy-duty wheels for repositioning across a facility
Installation Requirements & Accessories
- Requires 230 VAC (240V) power supply, 11A draw at 60 Hz — verify electrical compatibility before installation
- 20-foot power cord included
- Not compatible with 120V electrical circuits
- Hose and inline water filter are NOT included
- Direct continuous water-line connection is not confirmed in manufacturer data [NEEDS VERIFICATION]
- Not recommended for enclosed spaces without cross-ventilation
- Not effective in climates with relative humidity over 60%
Pro-Installer Tip
Evaporative cooling only works if the moist air it produces has somewhere to go. This unit pulls outside air through a wet pad and pushes it into the space — without an open door, window, or exhaust path for that air to exit, humidity builds up fast and cooling performance drops. Keep at least one exit point open opposite the unit's discharge to maintain a real cross-draft. On the water side, check the pad media and reservoir area periodically for mineral buildup, especially with hard water, and plan on replacing the cooling pads on a regular schedule to keep evaporation efficiency up. As a professional standard: this system performs best in relative humidity below 60% — above that, expect a smaller temperature drop regardless of airflow.
Key Benefits
- 17,500 CFM airflow moves large volumes of air across open industrial floor space
- Rated coverage up to 4,000 square feet per unit
- Heavy-duty wheels allow repositioning without dedicated ductwork
- 230 VAC operation at 11A draws less current than comparable 120V units, easing wiring demands on long circuit runs
- Uses evaporation instead of refrigerant, which lowers operating cost versus conventional AC
- Coated-edge pad media is built for extended service life before replacement
Technical Table
| Spec | Value | Unit |
|---|---|---|
| CFM | 17,500 | CFM |
| Effective Cooling Area | 4,000 | sq ft |
| Water Consumption Rate | 17 | gallons per hour |
| Voltage | 230 | VAC |
| Amperage | 11 | A |
| Frequency | 60 | Hz |
| Power Cord Length | 20 | ft |
| Unit Dimensions (W x H x D) | 73 x 74 x 35 | in |
| Shipping Dimensions (W x H x D) | 80 x 84 x 44 | in |
| Fan Speed Settings | Single speed | — |
| Housing Material | Galvanized steel, black powder coat | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Compatible with 230 VAC (240V) electrical infrastructure at 11A draw
- Fitted with heavy-duty wheels for mobility across warehouse, manufacturing, and commercial floor layouts
- Not compatible with 120V outlets or circuits
- Hose and inline water filter are NOT included with this unit
- Not recommended for sealed or unventilated enclosed rooms
- Not effective as a primary cooling method in relative humidity above 60%
FAQ
Does this unit require a continuous water connection?
The source specifications describe water consumption of approximately 17 gallons per hour but do not confirm a continuous fill float valve or direct water-line connection for this model. [NEEDS VERIFICATION]
How large of a space will this evaporative cooler effectively cool?
This unit is rated for coverage up to 4,000 square feet, driven by a 17,500 CFM airflow rating.
Can this be used indoors without open windows?
No. Evaporative cooling requires fresh makeup air. The manufacturer specifies that this unit performs best in well-ventilated spaces with doors, windows, or exhaust fans open to allow airflow through the space.
What kind of power outlet is required?
This model requires a 230 VAC (240V) power supply, drawing 11A at 60 Hz. It is not compatible with standard 120V outlets. Confirm your facility's electrical infrastructure before installation.
Does this cooler work well in humid climates?
Best performance occurs in environments with relative humidity below 60%. In more humid climates, evaporative cooling delivers reduced temperature drop.
Compliance & Warranty
Manufacturer warranty terms, safety certifications, and full compliance documentation are not detailed in the provided data. [NEEDS VERIFICATION] Refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the manufacturer's Product Specifications, Warranty, and Brochure documents.
