The PolarCool Pro 36" is a portable evaporative cooling unit built for warehouses, manufacturing floors, loading docks, and outdoor work areas that need high-volume spot or area cooling without the cost of running refrigerated AC.
This professional-grade unit is engineered for demanding commercial and industrial environments. It combines a galvanized steel frame with a durable black powder coat finish and a rotationally molded plastic reservoir rated at 38-40 gallons. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
System Components
- Axial-style high-volume fan delivering 10,000 CFM typical air movement
- Edge-coated evaporative cooling media pads, treated with an algae-resistant substrate for extended life
- Rotationally molded plastic reservoir, 38-40 gallon capacity, rust-proof and leak-resistant
- Touchpad control panel with variable 10-speed fan control
- Hinged top cover for interior access during maintenance and pad replacement
- Low-water shutoff feature that stops the pump automatically when reservoir level runs low
Installation Requirements & Accessories
- Requires a 120VAC circuit; unit draws 10A at 115V, 60 Hz (8.5A)
- Ships with a 20-foot GFCI-protected power cord
- Water supply hose is NOT included
- Direct continuous water-line connection is not confirmed in manufacturer data [NEEDS VERIFICATION]
- Not recommended for enclosed spaces without cross-ventilation
- Not effective in climates with relative humidity over 60% [NEEDS VERIFICATION — humidity threshold not explicitly stated by manufacturer for this model]
Pro-Installer Tip
Evaporative cooling only works when there's somewhere for the humid air to go — treat cross-ventilation as part of the install, not an afterthought. Running this unit in a sealed room without a path for fresh makeup air lets humidity build up fast, which kills cooling performance and can leave condensation on floors and equipment. Position the unit near an open bay door, loading dock, or window, and drain the reservoir when the unit sits idle for extended periods to keep mineral buildup from fouling the pump and pads. As a rule of thumb, evaporative cooling performs best in drier climates — expect diminished results once ambient relative humidity climbs above the point where the air can no longer absorb much additional moisture.
Key Benefits
- 10,000 CFM airflow for spot and area cooling in large open spaces
- 38-40 gallon reservoir runs up to 3x longer between refills than standard models
- Portable design lets you move cooling to loading docks, work bays, or event sites
- Variable 10-speed control lets you match airflow to conditions and conserve water
- Uses up to 75% less energy than conventional air conditioning per manufacturer data
- Low-water shutoff and hinged top cover simplify day-to-day maintenance
Technical Table
| Spec | Value | Unit |
|---|---|---|
| Air Movement (CFM) | 10,000 | CFM |
| Water Reservoir Capacity | 38-40 | Gallons |
| Water Consumption Rate | 12 | gallons per hour |
| Voltage | 120 | VAC |
| Power Consumption | 10 | A |
| Amperage | 8.5 | A |
| Fan Speed Settings | 10 | settings |
| Power Cord Length | 20 | ft |
| Unit Dimensions | 51 x 66 x 29 | in (W x H x D) |
| Unit Weight (Empty) | 198 | lbs |
| Unit Weight (Full) | 515 | lbs |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Compatible with standard 120VAC circuits; GFCI-protected 20-foot power cord included
- Suited for warehouses, manufacturing facilities, outdoor events, construction sites, agricultural operations, automotive shops, loading docks, and gyms with adequate ventilation
- Water supply hose is NOT included
- Direct continuous water-line hookup is NOT confirmed by manufacturer data [NEEDS VERIFICATION]
- NOT recommended for enclosed rooms without cross-ventilation or fresh makeup air
FAQ
Does this unit require a continuous water connection?
[NEEDS VERIFICATION] The source specifications describe a 38-40 gallon rotationally molded reservoir that provides extended runtime without a direct water supply, but do not confirm whether a continuous hose/water-line connection is supported.
How large of a space will this evaporative cooler effectively cool?
The manufacturer data states cooling capacity depends on relative humidity, temperature, and the area being cooled, and does not publish a fixed square footage rating. It is rated for 10,000 CFM of air movement, suited to spot and area cooling in warehouses, manufacturing facilities, outdoor events, and construction sites.
Can this be used indoors without open windows?
No. The manufacturer specifies use in well-ventilated spaces for best cooling results, and evaporative cooling depends on fresh outdoor air exchange. It is not recommended for enclosed spaces without cross-ventilation.
What kind of power outlet is required?
The unit ships with a 20-foot, 120VAC, GFCI-protected power cord and draws 10A at 115V, 60 Hz (8.5A amp rating).
Compliance & Warranty
Manufacturer warranty terms are not detailed in the provided specification data [NEEDS VERIFICATION]. Refer to the "Resources" tab above on this page for the manufacturer's warranty document and full compliance certifications.
