This cable connects a BigBattery BB175 connector on one end to a ring terminal on the other, giving you a direct link from your battery to a busbar or distribution point. It's built for BigBattery packs that use the BB175 connector interface.
BB175 cables are built to move current reliably between your battery and the rest of your power system. Matching connector type and gauge to your battery's rated output matters — mismatched cabling is a common source of voltage drop and heat buildup at the terminal. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
- Wire gauge: 6 AWG
- Length: 4 feet
- Terminal configuration: BB175 connector to ring terminal
- Intended use: battery-to-busbar or battery-to-distribution wiring within a BigBattery system
- NOT compatible with battery brands or systems that do not use the BB175 connector
- NOT a universal or adjustable-length cable — fixed at 4 ft with fixed connector types
- Conductor sized at 6 AWG for the connector pairing specified
- BB175 connector end matched to BigBattery's connector interface
- Ring terminal end suited for direct bolt-down to a busbar or distribution lug
- Fixed 4 ft length for consistent, repeatable fitment
| Spec | Value | Unit |
|---|---|---|
| Wire Gauge | 6 | AWG |
| Length | 4 | ft |
| Connector End A | BB175 | - |
| Connector End B | Ring Terminal | - |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
- Fits: BigBattery battery systems equipped with a BB175 connector
- Fits: applications wiring a BB175-equipped battery to a busbar or distribution point via ring terminal
- Does NOT fit: batteries or inverters using Anderson, XT, or other non-BB175 connector types
- Does NOT fit: applications requiring a length other than 4 ft — this cable is not field-adjustable
| Category | Detail |
|---|---|
| UL Listing | [NEEDS VERIFICATION] |
| NEC Ampacity Reference | [NEEDS VERIFICATION] |
| IP Rating | [NEEDS VERIFICATION] |
FAQ
What wire gauge is this cable?
This cable is 6 AWG, 4 feet in length, with a BB175 connector on one end and a ring terminal on the other.
Will this cable fit any lithium battery brand?
No. This cable is built for BigBattery systems using the BB175 connector. It is not compatible with battery brands that use a different connector interface.
What is the ring terminal end used for?
The ring terminal end is designed to bolt onto a busbar or other distribution point in your power system, giving you a solid mechanical and electrical connection.
Can I use this cable outside of a BigBattery system?
The BB175 end is proprietary to BigBattery's connector interface, so this cable is intended for BigBattery-to-busbar or BigBattery-to-distribution wiring, not universal use.
Warranty & Registration
Manufacturer warranty terms for this cable were not provided in the source data. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for current warranty coverage and registration steps. Ask us before you order if you need the warranty document sent to you directly — we always reply back.
