null Skip to main content

Amana | 11,900 BTU | PTAC with Electric Heat | 2.5 kW Electric Heat | 230/208V | PTC123J25CXXX | 15A Power Cord Included | Seacoast Protected

Amana

$1,256.00
(No reviews yet) Write a Review
SKU:
PTC123J25CXXX
Shipping:
Calculated at Checkout
Direct Factory Delivery: Ships directly from wholesale warehouse with scheduled liftgate delivery & tracking.
Adding to cart… The item has been added

This is a wall-sleeve air conditioner and electric-heat unit built for hotel rooms, apartments, coastal condos, or additions where central ductwork isn't available. It's built for property managers and homeowners near seacoast environments who need self-contained, per-room climate control with added corrosion resistance.

The PTC123J25CXXX is a standard-cooler PTAC chassis with a single-stage 2.5/2.1 kW electric heat strip, built on the 230/208V platform and finished with Amana's seacoast corrosion-protection package (Feature Code C) for coastal and high-humidity installs such as beachfront hotels, condos, and rental properties. The unit meets or exceeds ASHRAE 90.1 efficiency standards. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.

  • Fits the industry-standard 42 in wide x 16-1/16 in high wall sleeve opening.
  • Requires a 230/208V circuit rated for at least 15A (MOP), with an MCA of 14.1A.
  • Ships with a factory-installed NEMA 6-15P power cord and LCDI device per UL 484 (applies to all units under 250V, including this one).
  • Wall Sleeve NOT included — order separately (WS900E, WS900QW standard, or WS900SC for triple seacoast protection).
  • Exterior Architectural Grille NOT included — order separately (SGK, AGK, or PGK series).
  • Not compatible with 115V household circuits.
  • Not compatible with 265V commercial hardwire or sub-base setups — see the PTC124J 265V commercial sibling for that voltage class.
  • Not a drop-in replacement for non-standard or custom sleeve openings outside 42 in x 16-1/16 in.
Pro-Installer Tip: The most common callback on seacoast PTAC installs isn't the unit — it's condensate backing up into the drywall because the sleeve was set dead level instead of pitched toward the exterior. Set the sleeve with a slight outward pitch (about 1/4 bubble on a torpedo level, per Amana's framing diagram) so condensate drains outdoors instead of pooling at the indoor lip. On seacoast jobs specifically, pair this with the WS900SC sleeve rather than a standard WS900E — the triple-protected coating resists salt-air corrosion at the drain pan and screws, which is where standard sleeves rust through first in coastal properties. Confirm the NEMA 6-15P receptacle matches the cord before final wall-in per your local electrical inspector's NEMA receptacle chart, consistent with NEC receptacle code requirements for fixed-appliance circuits.
  • EER of 11.4 (230V) / 11.5 (208V) for the compressor cooling cycle.
  • Dehumidification rated at 1.7 pints per hour.
  • 65 CFM fresh-air ventilation option for make-up air in tightly sealed rooms.
  • Dry-coil airflow of 313/285 CFM (high/low) and wet-coil airflow of 330/245 CFM (high/low).
  • Single-stage 2.5/2.1 kW electric heat strip supplies 8,500 BTU (230V) / 6,800 BTU (208V) of supplemental heat.
  • Seacoast corrosion protection package for extended chassis life in coastal air.
SpecValueUnit
Cooling Capacity (230V/208V)11,900/11,700BTU/h
Heating Capacity (230V)8,500BTU/h
Heating Capacity (208V)6,800BTU/h
Electric Heat Strip Size2.5/2.1kW
Heat Stages1stage
Voltage230/208V
Compressor Amps5.6/5.6A
Compressor Watts1,040/1,015W
Total Heat Watts2,570/2,115W
Total Heat Amps11.2/10.1A
MCA (with heater)14.1A
MOP (with heater)15A
NEMA Plug / Power Cord6-15P
EER11.4/11.5BTU/Wh
CFM Wet (High/Low)330/245CFM
CFM Dry (High/Low)313/285CFM
Fresh Air Vent65CFM
Dehumidification1.7pints/hr
Net Weight108lb
Shipping Weight125lb
Refrigerant TypeR-32
Wall Sleeve DimensionsStandard 42 x 16-1/16in
Wall Sleeve IncludedNot Included
Exterior Architectural Grille IncludedNot Included

Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.

  • Compatible with 230/208V circuits via the factory-installed NEMA 6-15P power cord.
  • Fits standard 42-inch x 16-1/16-inch wall sleeve openings (rough framing opening approx. 42-1/4 in x 16-1/4 in minimum).
  • Seacoast Protected chassis pairs with the WS900SC triple-protected sleeve for coastal installs.
  • Not compatible with 115V circuits.
  • Not compatible with 265V hardwire or sub-base configurations — that voltage class is served by the PTC124J commercial sibling, not this unit.
  • Wall Sleeve and Exterior Architectural Grille are NOT included and must be ordered separately.
  • Not a drop-in fit for non-standard or custom-depth sleeve openings.
AttributeDetail
Refrigerant TypeR-32
Efficiency StandardMeets or exceeds ASHRAE 90.1
Power Cord ComplianceLCDI power cord, UL 484 (applies to units under 250V)
Voltage Operating RangeMinimum 197V / Maximum 253V
Overcurrent Protection15A MOP with electric heat installed

FAQ

Is the wall sleeve included with this unit?
No. The PTC123J25CXXX chassis ships without a wall sleeve. Wall sleeves (such as the WS900E, WS900QW, or WS900SC seacoast sleeve) and the exterior architectural grille are sold separately.

What breaker size and plug type does this unit require?
This configuration requires a 15-amp circuit (MOP 15A) with a NEMA 6-15P power cord attached at the factory. Total amp draw with the 2.5/2.1 kW heater running is 11.2/10.1A, with an MCA of 14.1A.

Can this be hardwired for 265V commercial applications?
No. This unit is rated 230/208V and is not compatible with 265V circuits. A 265V version requires the Amana sub-base (PTSB4**E series) or hard-wire kit PTPWHWK4 with disconnect switch PSHW04A, none of which apply to this chassis. If you need a 265V commercial unit, the PTC124J is the 265V sibling chassis.

Does this require a licensed electrician or HVAC professional to install and keep the warranty valid?
[NEEDS VERIFICATION] Installation labor requirements are not specified in the provided catalog data. Refer to the warranty document in the Resources tab for exact terms.

Will this fit a standard 42-inch by 16-inch wall sleeve opening?
Yes. The chassis is designed for the industry-standard 42 in wide x 16-1/16 in high wall sleeve opening (rough framing opening approximately 42-1/4 in x 16-1/4 in minimum). It is not a drop-in fit for non-standard sleeve openings.

Warranty & Registration

This unit carries a 1-Year Repair/Replace warranty and a 5-Year Parts Limited Warranty on the sealed system, as published on the manufacturer's warranty badge. Exact terms, including any distinctions between residential and commercial/hospitality usage, are detailed in the warranty PDF found in the "Resources (System Manuals and Warranty)" Tab above on this page — we don't assert terms beyond what that document states, so check it before you order if you're installing in a commercial or hospitality setting.

Wholesale Specifications & Compliance Guarantee

Official MSSD Direct Distribution Data for Amana Item #PTC123J25CXXX

🚚 Wholesale Freight Shipping Structure

  • Palletized Freight Delivery: Securely packaged and strapped to prevent coil or cabinet transit damage.
  • Liftgate Unloading Included: Every system price reflects complete residential or jobsite liftgate unloading services.
  • Terminal Tracking: Direct carrier tracking with scheduled delivery appointment confirmation.

🛡️ EPA Refrigerant & Safety Compliance

  • Low-GWP Mandate Certified: Compliant with 2025–2026 EPA AIM Act guidelines (R-454B / R-32 next-gen refrigerants).
  • Factory Parts Protection: Full manufacturer warranty integrity preserved via authorized wholesale distribution channels.
  • Factory Pre-Charged: Outdoor condensing units engineered and tested for rated line-set lengths.

📜 Manufacturer Warranty Protection

Authorized Dealer Warranty Protection: All Amana systems purchased through MSSD include full factory manufacturer warranty coverage.

📊 System Engineering & Performance Specifications

Product Model Title Amana | 11,900 BTU | PTAC with Electric Heat | 2.5 kW Electric Heat | 230/208V | PTC123J25CXXX | 15A Power Cord Included | Seacoast Protected
Factory SKU / Part # PTC123J25CXXX
Brand Entity Amana
Wholesale Freight Rate $0.00 (Palletized Liftgate Unloading Included)