This 77.5" adapter cable connects an EG4 Chargeverter-GC battery charger to your 48V battery bank. It is a purpose-built link cable, not a generic battery cable, so length and connector fitment matter.
Adapter and jumper cables sit at a point in the circuit where undersized or mismatched hardware causes voltage drop, heat buildup, or intermittent charging faults. This cable is built to link the EG4 Chargeverter-GC to your battery bank at the specified 77.5" length so you don't have to splice, extend, or improvise a connection. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Length: 77.5 inches (fixed, not adjustable/cuttable per manufacturer design intent).
- Confirmed application: EG4 Chargeverter-GC 48V 100A Battery Charger to battery bank connection.
- NOT confirmed for use with the EG4 Chargeverter Plus or other Chargeverter model variants — connector/pinout compatibility across Chargeverter models is not documented in available manufacturer data [NEEDS VERIFICATION].
- Gauge/AWG rating: [NEEDS VERIFICATION] — not provided in manufacturer specifications supplied.
- Terminal/lug type and size: [NEEDS VERIFICATION] — not provided in manufacturer specifications supplied.
- Continuous ampacity rating: [NEEDS VERIFICATION] — not provided in manufacturer specifications supplied.
A charger-to-battery adapter cable is a common spot for a loose or corroded connection to hide, since it's often tucked behind equipment and rarely inspected. A loose terminal at this junction raises contact resistance, and under the Chargeverter-GC's 100A charge current that resistance turns into localized heat — a precursor to thermal runaway risk at the battery terminal. After installation, torque every terminal connection to the battery and charger's specified value using a digital torque wrench, then re-check torque after the first 24 hours of charge cycling as initial thermal expansion can loosen a fresh connection. Reference NEC Article 690 (or your battery manufacturer's terminal torque chart) for the correct spec — never torque by feel on a 100A circuit.
Key Benefits
- Purpose-built length (77.5") eliminates the need for field splicing or extension connectors.
- Designed as a direct-fit link between the EG4 Chargeverter-GC and a compatible 48V battery bank.
- Reduces guesswork versus sourcing a generic aftermarket cable for this connection.
- Sold as a single adapter cable (SKU EG4CHARGEVERTER-CA) for straightforward reordering.
Technical Table
| Spec | Value | Unit |
|---|---|---|
| Length | 77.5 | inches |
| Compatible Charger Model | EG4 Chargeverter-GC | — |
| Compatible Voltage Class | 48V | VDC |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: EG4 Chargeverter-GC 48V 100A Battery Charger, connecting to a 48V battery bank.
- Does NOT have confirmed fitment with the EG4 Chargeverter Plus or other Chargeverter model variants — treat as incompatible until verified with MSSD.
- Does NOT include gauge, ampacity, or terminal size data in current manufacturer records — confirm these details with MSSD before pairing with non-EG4 hardware.
Compliance & Environment
| Item | Rating/Status |
|---|---|
| UL Listing | [NEEDS VERIFICATION] |
| IP Rating | [NEEDS VERIFICATION] |
| NEC Ampacity Reference | [NEEDS VERIFICATION] |
FAQ
What is this cable used for?
It connects the EG4 Chargeverter-GC battery charger output to your 48V battery bank input terminals.
Is this cable rated for 48V systems?
Yes, it is designed to pair with the EG4 Chargeverter-GC, which is a 48V 100A battery charger.
Will this fit other EG4 Chargeverter models like the Chargeverter Plus?
This is not confirmed. The manufacturer data provided lists this adapter cable specifically alongside the Chargeverter-GC model. Confirm fitment with MSSD before ordering if you own a different Chargeverter variant.
What length is this cable?
77.5 inches, measured end to end.
Warranty & Registration
Manufacturer warranty terms for this adapter cable are not included in the supplied specifications [NEEDS VERIFICATION]. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the current EG4 warranty documentation, or contact MSSD and we'll track it down for you before you order.
