This is the 120V input power cord for the EG4 Chargeverter GC battery charger. It lets you plug the Chargeverter into a standard 120V outlet or generator connection instead of hardwiring it.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
The EG4 Chargeverter GC is a 48V 100A battery charger designed to feed AC power into a battery bank. This power cord is the accessory that connects that charger to a 120V power source. Use it when you need a plug-in AC connection rather than a hardwired install, and confirm your Chargeverter model before ordering, since EG4 sells more than one Chargeverter variant.
Critical Fitment & Requirements
- Input voltage: 120V AC
- Designed for use with the EG4 Chargeverter GC 48V 100A battery charger
- NOT confirmed compatible with the EG4 Chargeverter Plus or other Chargeverter variants — verify model number before purchase [NEEDS VERIFICATION]
- NOT a DC battery cable — this is an AC input power cord, not rated for battery-to-inverter connections
- Wire gauge, cord length, plug type, and ampacity rating are not specified in manufacturer data provided [NEEDS VERIFICATION]
Key Benefits
- Purpose-built accessory for the EG4 Chargeverter GC — matched to its input connector, not a universal aftermarket cord
- Simplifies installation by allowing a standard 120V plug-in connection instead of hardwiring
- Reduces guesswork on wire pinout or connector mismatch compared to sourcing a generic power cord
- Keeps your charger installation consistent with its designed input interface
| Spec | Value | Unit |
|---|---|---|
| Input Voltage | 120 | V |
| Compatible Charger Model | EG4 Chargeverter GC | — |
| Charger Output Rating (for reference) | 48V / 100A | V / A |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: EG4 Chargeverter GC (48V 100A battery charger), 120V AC input configuration
- Does NOT fit: EG4 Chargeverter Plus or other Chargeverter model variants, unless separately confirmed [NEEDS VERIFICATION]
- Does NOT function as a DC battery cable or communication cable
- Not confirmed for use on 240V circuits — this cord is specified for 120V only
| Compliance Item | Rating/Status |
|---|---|
| UL Listing | [NEEDS VERIFICATION] |
| NEC Ampacity Reference | [NEEDS VERIFICATION] |
| IP Rating | [NEEDS VERIFICATION] |
FAQ
What voltage is this power cord rated for?
This cord is built for 120V input applications, matching a standard household or generator 120V circuit.
Is this cord rated for 48V battery systems?
No. This cord carries 120V AC input power to the Chargeverter GC unit itself. It is not a 48V DC battery cable.
Will this cord work with the EG4 Chargeverter Plus?
That fitment is not confirmed in manufacturer data provided. Check the "Resources (System Manuals and Warranty)" tab or contact us before ordering if you own the Chargeverter Plus.
What amperage does this cord support?
Amperage rating for the cord itself is not specified in the manufacturer data on file. The Chargeverter GC unit it powers is rated 48V 100A on the output (DC) side, per its product listing title, but this does not confirm the cord's own ampacity.
Warranty & Registration
Manufacturer warranty terms for this power cord are not detailed in the data provided. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for exact warranty duration, registration steps, and coverage terms. Reach out to us if you can't find what you need there — we always reply back.
