![EG4 | WMB Male Plug Set [Orange] | Battery Connector | EG4BACONPLOR](https://cdn11.bigcommerce.com/s-6fklyl9bzq/images/stencil/1280x1280/products/10479/64806/7678d926-3814-4864-b75f-1bf14f933308__56244.1750166994.386.513__84546.1789175678.jpg?c=1 "EG4 | WMB Male Plug Set [Orange] | Battery Connector | EG4BACONPLOR")
![EG4 | WMB Male Plug Set [Orange] | Battery Connector | EG4BACONPLOR](https://cdn11.bigcommerce.com/s-6fklyl9bzq/images/stencil/500x659/products/10479/64806/7678d926-3814-4864-b75f-1bf14f933308__56244.1750166994.386.513__84546.1789175678.jpg?c=1 "EG4 | WMB Male Plug Set [Orange] | Battery Connector | EG4BACONPLOR")
This is a replacement male plug connector for EG4 battery systems using the WMB-style connection, sold as a set and color-coded orange for polarity identification.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
EG4 battery connectors are a common failure point when mismatched or improperly seated, since loose or incorrect connections generate resistive heat under load. This WMB male plug set is intended as a direct replacement for EG4 systems using this connector style, letting you restore a factory-spec connection point rather than improvising with universal terminals.
Critical Fitment & Requirements
- Connector style: WMB male plug set
- Color: Orange
- Sold as: Male plug set (requires matching female counterpart, sold separately)
- Does NOT include the female plug half — verify you are ordering the correct gender for your application
- NOT confirmed compatible with non-EG4 battery brands or non-WMB connector styles
- Wire gauge, ampacity limit, and voltage rating: [NEEDS VERIFICATION] — not provided in manufacturer data
Battery connectors like this one are a frequent source of intermittent connection faults when the mating halves are not fully seated or when the crimp behind the pin is not properly compressed. A loose pin under repeated charge/discharge cycling can arc internally, degrading the plastic housing and eventually causing a high-resistance hot spot. Before final assembly, verify pin seating with a firm tug-test and inspect the crimp with a magnifier or borescope if you did not perform the crimp yourself. Reference your battery manufacturer's torque or crimp specification where available, and treat any discoloration or looseness at the connector body as a reason to replace the part rather than reuse it.
Key Benefits
- Matches EG4's factory WMB male plug design for correct pin fitment
- Orange color coding simplifies polarity identification during install
- Direct-replacement part avoids improvised splices at the battery terminal
- Sold as a set for consistent connector-to-connector matching
| Spec | Value | Unit |
|---|---|---|
| Connector Type | WMB Male Plug Set | — |
| Color | Orange | — |
| SKU | EG4BACONPLOR | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: EG4 battery systems that use the WMB-style male connector interface [NEEDS VERIFICATION — confirm exact model list against your Resources tab documentation]
- Does NOT fit: battery systems using non-WMB connector geometries
- Does NOT include: the matching female plug half, sold separately
- Not confirmed for use with third-party or non-EG4 battery brands
| Compliance Item | Value |
|---|---|
| UL Listing | [NEEDS VERIFICATION] |
| NEC Ampacity Reference | [NEEDS VERIFICATION] |
| IP Rating | [NEEDS VERIFICATION] |
FAQ
What does the orange color on this connector indicate?
Orange is used as a color code for this connector set. Confirm polarity and orientation against your battery's documentation before connecting, since exact polarity assignment is not specified in the source data.
Is this the male or female half of the connector?
This listing is for the male plug set only. You will need the matching female counterpart on the opposing cable or battery terminal for a complete connection.
Will this fit any battery brand, or only EG4?
This connector is branded and sold as an EG4 part. Fitment with other manufacturers' batteries is not confirmed and should not be assumed. Verify your battery's connector style before ordering.
What gauge wire or ampacity is this connector rated for?
Wire gauge and ampacity ratings were not provided in the manufacturer data available for this listing. [NEEDS VERIFICATION] Check the Resources tab or contact us before pairing this connector with high-current cable runs.
Warranty & Registration
Manufacturer warranty terms for this connector were not included in the supplied data. [NEEDS VERIFICATION] Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for official warranty documentation, or contact us before you order if you need coverage details confirmed in writing.
