AlorAir Optional Dehumidifier Controller for the Sentinel HD55, HD90, HDi90, SLGR 1400X, White
The Remote Controller connects to the dehumidifier via a 25' CAT 5 cable. In addition to monitoring surrounding conditions, the remote control contains an integrated sensor that offers multiple options for remote controlling your unit.
The remote control can be used in those 2 ways:
Install the dehumidifier in one room and then duct it to another room that has the remote control mounted on the wall. So the unit can adapt to the humidity level.
When your unit is installed in the crawl space, the remote controller can be mounted in your living space or garage. This realizes the long-distance humidity controlling and intelligent monitoring of the unit simultaneously.
When the back of the controller you receive is shown in figure (Series 2), the controller you receive is Series 2.
You can switch the optional remote control by mode, which is suitable for different ALORAIR dehumidifiers.
Mode 1 is suitable for the following models:
Sentinel HD55 White dehumidifier
Sentinel HD55 Blue dehumidifier
Sentinel HD90 dehumidifier
Sentinel HDi90 dehumidifier
Sentinel HDi100 dehumidifier
Sentinel HDi120 dehumidifier
Sentinel SLGR 1400X dehumidifier
Mode 2 is suitable for the following models:
Sentinel HD55 Gold dehumidifier
Optional remote controller mode switching guide (Series 2)
Step 1: Pry open the cover.
Step 2: Pull out the red jumper cap and connect the pin holder according to your model
For example Sentinel, HDi65, and Sentinel HD55 Gold are connected to the WIFI New header, and other models are connected to the OLD holder.
Step 3: Close the back cover of the controller. If you have any questions, please contact us.
User Manual Download:
