The HVAC Mirage 12,000 BTU wall-mounted indoor air handler is a high-efficiency component designed for residential and light-commercial multi-zone mini split systems. This unit is sold as an indoor air handler only — a compatible multi-zone outdoor condenser, line set, and licensed professional installation are required separately.
The HVAC Mirage Series wall-mounted indoor air handler delivers 19.0 SEER2-rated variable-speed comfort using R-410A refrigerant on a dedicated 208/230V circuit. As an indoor-only component, it is designed to pair with a compatible multi-zone outdoor condenser and requires licensed professional installation — this is not a plug-and-play or pre-charged DIY kit. Precision flare connections, a proper vacuum pull, and correctly sized copper line sets are prerequisites for safe, code-compliant operation and for the manufacturer warranty to remain valid.
Indoor Air Handler
Wireless Remote Control
Installation Requirements & Accessories
- Requires a dedicated 208-230V / 60Hz / Single-Phase electrical circuit.
- Requires a 3/8" Liquid x 7/8" Suction copper line set — NOT included.
- Outdoor condenser unit — NOT included. Must be purchased separately and must be a verified compatible multi-zone model.
- Wall mounting bracket — NOT included (verify accessory requirements with your installer).
- Not compatible with 115V-only circuits.
- Professional installation by a licensed HVAC technician is required. This is not a DIY system.
Pro-Installer Tip: The most common callback on non-DIY wall-mount units involves leaking flare connections and "E1" communication codes triggered by refrigerant undercharge. After fabricating flares, torque each fitting to the manufacturer's specified ft-lb rating using a calibrated digital torque wrench — never hand-tight plus a quarter-turn. Before opening service valves, hold a vacuum below 500 microns for a minimum of 15 minutes and verify the decay rate with a quality micron gauge; a rapid rise indicates a leak or moisture contamination. Run 14/4 AWG stranded communication wire between the indoor and outdoor sections — do not substitute solid conductor. This practice satisfies EPA Section 608 requirements and protects the factory charge of R-410A refrigerant from contamination-driven efficiency loss over time.
Key Benefits
- 19.0 SEER2 efficiency rating reduces annual energy consumption compared to lower-rated systems.
- Wall-mounted low-profile design preserves floor and ceiling space in any room configuration.
- Variable-speed inverter-driven operation maintains precise set-point temperatures with minimal cycling.
- Low sound profile makes this unit well-suited for bedrooms, living areas, and offices.
- R-410A factory pre-charged refrigerant circuit simplifies commissioning for the installing technician.
- Compatible with multi-zone outdoor condensers, enabling whole-home zoning under a single outdoor unit.
Technical Specifications
| Attribute | Specification |
|---|---|
| Brand | HVAC Mirage |
| Series | HVAC Mirage Series |
| Model / SKU | IGFH241C |
| Product Type | Indoor Air Handler Unit (Component Only) |
| Cooling Capacity | 12,000 BTU/h |
| Tonnage | 1.0 Ton |
| SEER2 Rating | 19.0 |
| Voltage | 208-230V / 60Hz / 1-Phase |
| Refrigerant | R-454B (Factory Pre-Charged) |
| Indoor Unit Architecture | Wall Mounted |
| Line Set Size Required | 3/8" Liquid x 7/8" Suction (NOT included) |
| DIY Status | No — Professional Installation Required |
| Factory Warranty | 7-Year Compressor / 5-Year Parts Limited Warranty |
Compatibility & Fitment
- Compatible with dedicated 208-230V single-phase electrical circuits (60Hz).
- Designed for use with compatible HVAC Mirage multi-zone outdoor condensers — verify model compatibility before ordering.
- Not compatible with 115V-only circuits.
- Copper line set (3/8" Liquid x 7/8" Suction) is NOT included — must be purchased separately.
- Outdoor condenser is NOT included — this listing covers the indoor air handler unit only.
- Wall mounting bracket is NOT included.
FAQ
- Is professional installation required to keep the warranty valid, or is this a true DIY kit?
- This is not a DIY kit. Professional installation by a licensed HVAC technician is required. The 7-Year Compressor / 5-Year Parts warranty is valid only when installed in accordance with local codes and EPA Section 608 guidelines, including torquing flare fittings to factory specifications and evacuating to below 500 microns.
- Is the line set included, and if not, what size do I need to buy?
- No, the line set is NOT included. This unit requires a 3/8" Liquid x 7/8" Suction copper line set, purchased separately.
- Is the outdoor condenser included?
- No. This listing is for the indoor air handler unit only (model IGFH241C). A compatible multi-zone outdoor condenser must be purchased and installed separately.
- What electrical circuit does this unit require?
- This unit requires a dedicated 208-230V / 60Hz / Single-Phase circuit. It is NOT compatible with 115V-only circuits. Consult a licensed electrician to confirm circuit compatibility before purchase.
Compliance & Warranty
The HVAC Mirage IGFH241C carries a 7-Year Compressor / 5-Year Parts Limited Warranty, valid exclusively when installed by a licensed HVAC professional in compliance with all applicable local codes, National Electrical Code (NEC) requirements, and EPA Section 608 regulations governing the handling of R-410A refrigerant. Installation by an unlicensed individual or failure to meet vacuum and flare-torque specifications will void the manufacturer warranty. Retain all installation documentation, including vacuum log and technician license information, as proof of compliance.
4 Reviews Hide Reviews Show Reviews
-
Smooth Installation & Fast Shipping
Arrived well packaged on a pallet. All components were clearly labeled. System started up immediately upon vacuum leak test and charge release.
-
Great Value Direct from Manufacturer
Compared this model to higher priced brands and could not be happier. Clean aesthetic, high SEER2 efficiency, and clear submittal sheets. Fast order processing.
-
Outstanding Heating Capacity in Cold Weather
We bought this unit for supplemental heating in our garage workspace. It ran flawlessly all winter through sub-zero temperatures. Great build quality and technical documentation.
-
Extremely Quiet & Efficient Heat Pump
Installed this system in my home office. It is whisper quiet inside and cools the room down in under 5 minutes. Shipping from Mini Split Systems Direct was fast with liftgate delivery included.
