This is a 10.1-inch embedded display for RV monitoring and control, built by Links2 for use with compatible RV electrical systems. It's a monitoring/control accessory, not a power conversion device.
The Links2 Vision 10 Embedded Screen is a monitoring and control interface, not a power conversion or storage device — it carries no AC output, battery voltage, or PV input specifications, and no UL 1741/UL 458/IEEE 1547 listings apply to this device class. It's built by Links2, a sister company of LinksWell, Inc. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Power & Interconnection Requirements
- This is a display/control accessory — it has no continuous or surge AC output rating.
- No DC battery voltage input is specified in manufacturer data. [NEEDS VERIFICATION]
- No PV/MPPT specifications apply — this device is not a solar charge controller or inverter.
- Does NOT convert, invert, or export power to the grid or any load.
- Does NOT carry a UL 1741, UL 458, or IEEE 1547 listing — those standards govern grid-interactive inverters, not monitoring displays.
RVC and RS485 wiring runs in mobile installs are prone to communication dropouts when the display's ground reference floats relative to the chassis ground of the RV's DC bus — this shows up as intermittent blank screens or lost data on the Links2 APP. Bond the monitor's ground lead directly to the vehicle chassis ground point during install, and verify continuity with a Digital Multimeter (target: near-0 ohm resistance) before closing up the dash or cabinet. This single step prevents the majority of nuisance comm faults reported on embedded RV displays. For mobile (RV) installs, this falls outside NEC Article 690/706 utility-interconnection rules, but you should still follow the vehicle manufacturer's low-voltage wiring and grounding guidance to keep the RVC bus stable.
Key Benefits
- 10.1-inch, 1024 x 600 resolution display for clear readouts of RV system data.
- Links2 APP control lets you manage settings and monitor systems from a smartphone.
- OTG upgrade support simplifies firmware updates in the field.
- USB connectivity supports integration with other onboard devices.
- RS485 and RVC interfaces provide real-time communication with compatible RV systems.
Technical Table
| Spec | Value | Unit |
|---|---|---|
| Screen Size | 10.1 | Inches |
| Screen Resolution | 1024 x 600 | pixels |
| System | Embedded System | - |
| App Control | Links2 APP | - |
| Firmware Update | OTG Upgrade Support | - |
| Connectivity | USB Support | - |
| Interface | RS485 & RVC | - |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Compatible with RV systems using RS485 and RVC communication protocols.
- Supports Links2 APP for smartphone-based monitoring and control.
- Supports OTG-based firmware upgrades and USB device connectivity.
- NOT a power inverter, charger, or battery — it does not regulate, convert, or store electrical power.
- NOT rated for grid interconnection or utility sell-back of any kind.
- Battery chemistry compatibility, DC input voltage, and parallel/stacking limits are NOT specified in manufacturer data. [NEEDS VERIFICATION]
Compliance & Environment Table
| Category | Value |
|---|---|
| UL 1741 / UL 458 / IEEE 1547 | Not applicable — monitoring accessory, no listing provided |
| NEC Article Applicability | Not applicable to this device class per provided data |
| NEMA Enclosure Rating | [NEEDS VERIFICATION] |
FAQ
Can this monitor sell power back to the grid?
No. This is a display/monitoring accessory. It does not convert, invert, or export power in any form.
What battery voltage is required to run this screen?
[NEEDS VERIFICATION] The manufacturer data provided does not list a DC input voltage for this monitor.
Can I parallel multiple units together?
[NEEDS VERIFICATION] The manufacturer data provided does not state a stacking or parallel-unit limit for this monitor.
Is this UL 1741 listed for utility interconnection?
No UL 1741 listing is provided in the manufacturer data. This device is a monitoring accessory, not a grid-interactive inverter, so UL 1741 does not apply to it.
What does this screen connect to and control?
It communicates with your RV's systems via RS485 and RVC interfaces and pairs with the Links2 APP for smartphone-based monitoring and settings control.
Warranty & Registration
Manufacturer warranty terms for the Links2 Vision 10 Embedded Screen are not included in the provided data. [NEEDS VERIFICATION] Refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the manufacturer's warranty documentation. Contact us before you order if you need confirmation on coverage terms — we always reply back.
