This is a mobile cart built to hold two 48V RHINO batteries. It is a physical support accessory — it does not store or supply power itself. If you run a pair of 48V RHINO units and need a way to move them together or keep them organized off the floor, this cart is built for that job.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Why This Matters
Battery carts are an easy detail to overlook, but they solve two real problems: physical stability and mobility. A cart rated to hold two 48V RHINO units keeps the batteries off bare flooring, off uneven ground, and organized in a fixed footprint — which matters if you're servicing, inspecting, or relocating a battery bank on a regular basis. This listing covers dimensions only; treat load rating, material, and wheel/caster specs as manufacturer-documented items in the Resources tab, not assumptions made here.
Cart Characteristics
This is a mobile cart designed specifically to hold two 48V RHINO batteries. It is a hardware accessory, not an electrical component — it carries no chemistry, voltage, or wiring specification of its own.
Wiring & Configuration Limits
This cart has no wiring function. It does not connect to, series-wire, or parallel-wire the RHINO batteries placed on it. Any series or parallel configuration of the batteries themselves is governed entirely by the RHINO battery's own documentation, not by this cart.
Pro-Installer Tip
Loading two 48V RHINO batteries onto a shared cart concentrates weight in a fixed footprint, and uneven distribution across the cart's 43 in. by 12 in. base can stress the frame or casters over time. Center both units on the platform and confirm the cart is on level ground before rolling it into position — this prevents frame stress and premature wear at the wheel mounts. Validate load balance visually or with a simple level tool before each move, the same way you'd check a rack-mounted battery bank is torqued and seated evenly. Treat this as a mechanical-fit check, not an electrical one: it protects the hardware, not the battery's depth-of-discharge performance.
Key Benefits
- Sized to hold two 48V RHINO batteries on one cart
- Compact footprint: 43 in. wide by 12 in. deep by 32.5 in. tall
- Simplifies moving a paired RHINO bank as a single unit
Technical Table
| Spec | Value |
|---|---|
| Depth | 12 in. |
| Width | 43 in. |
| Height | 32.5 in. |
| Designed For | 2x 48V RHINO batteries |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
Positive fitment: Built to hold two 48V RHINO batteries.
Negative fitment: Not documented for use with any battery other than the 48V RHINO in this listing. Not an electrical component — it does not charge, series-wire, or parallel-wire batteries placed on it. Not a substitute for battery-specific mounting brackets or tie-downs if those are required by the battery manufacturer's installation instructions. Batteries are sold separately and are not included with this cart.
FAQ
How many batteries does this cart hold?
It is built to hold two 48V RHINO batteries.
Does this cart include the RHINO batteries?
No. The batteries are sold separately. This listing is for the cart only.
Does the cart wire the batteries together?
No. The cart has no electrical function. Series or parallel wiring of the batteries is handled separately per the RHINO battery's own documentation.
What are the cart's dimensions?
12 in. deep, 43 in. wide, and 32.5 in. tall.
Warranty & Support
Warranty terms for this cart are documented by the manufacturer in the Resources tab above, not in this listing. If you have questions about fit, load capacity, or your specific RHINO setup before you order, ask us — we always reply back.
