The PolarCool 36″ Industrial Belt-Drive Wall Exhaust Fan (6603-7011) pulls 12,280 CFM through a corrosion-resistant G90 galvanized slant housing and discharge cone to clear trapped heat, fumes, and humidified air.
Why Choose This Configuration: Real-World Value & Install Math
- Sized for 10-Minute Building Air Exchanges: PolarCool’s sizing formula divides building length x width x average ceiling height by 12,280 CFM and a 10-minute air-change target (rounded up) when paired with adequate intake air.
- Included Discharge Cone Recovers Tip Airflow: Expanding fast exhaust air into calm outdoor air through the 36.9 in discharge cone reduces blade-tip swirl and boosts real exhaust CFM over unshrouded wall fans.
- Dual-Voltage 115/230V Motor Flexibility: Wiring for 115V (5.5A) or 230V (2.7A) lets your electrician tie into existing single-phase lighting/power panels cleanly.
- Honest Trade-Off: This standalone fan ships WITHOUT the matching 36 in Exhaust Shutter (6611-9022) and without a power cord, and an exhaust fan never works efficiently unless you provide matching makeup-air intake openings or evaporative wall coolers.
Overview
Evaporative coolers, welding bays, machine shops, and commercial garages all stall out when superheated indoor air has nowhere to escape. The PolarCool 6603-7011 sits flush against an interior wall opening in a G90 galvanized slant housing with an exterior 36.9 in discharge cone and safety guard. Driven by a 1/2 HP 1,725 RPM single-phase belt-drive motor with cogged V-belt and tensioner, it pulls 12,280 CFM outdoors and pairs directly with PolarCool’s cam-lock shutter (6611-9022).
System Components
- PolarCool 36″ slant-wall belt-drive exhaust fan assembly in G90 galvanized steel housing (39.5 x 39.6 in intake, 32.5 in top / 24 in bottom slant depth)
- 1/2 HP, 1,725 RPM, 1.0 Service Factor single-phase motor (115/230V) with cogged V-belt and automatic belt tensioner
- 4-blade galvanized steel propeller, protective guard, and G90 galvanized steel discharge cone (36.9 in diameter)
Installation Requirements & Accessories
- Hardwired 115V (5.5A) or 230V (2.7A) single-phase power supply and disconnect switch installed by a certified electrician per NEC and state/local codes (no power cord included)
- Framed wall rough opening of 42.75 in W x 43.75 in H (108.6 x 111.1 cm) structurally braced to carry the 211 lb fan (338 lb crated system reference with shutter) and 50 in center-to-center spacing when banking multiple units
- Keep exterior discharge path clear at least 3 ft past the cone (any obstacle closer must stay under 12 in wide, or 30% of fan diameter)
- Wait at least 5 minutes after disconnecting drive power before servicing, and match indoor intake/makeup air area to exhaust CFM
- Not Included: 36 in Aluminum Exhaust Fan Shutter (SKU 6611-9022), power cord, electrical disconnect/conduit, wall framing lumber/steel, lifting equipment, and mounting screws
- Not Compatible With: Explosion-proof hazardous gas atmospheres (not certified explosion-proof) or sealed buildings without makeup-air intakes
Pro-Installer Tip
Framing, exterior clearance, and makeup air decide whether a wall exhaust fan hits rated airflow or fights static pressure. Frame the rough opening to exact PolarCool manual specs (42.75 in W x 43.75 in H), mount flush inside the wall, and confirm at least 3 ft of clear air past the cone (no beams or awnings wider than 12 in blocking exhaust). Pair every 6603-7011 with open intake vents or wall-mounted evaporative coolers opposite the fan so negative pressure stays controlled, and always lock out power for 5 minutes and let a certified electrician wire NEC disconnects before opening any motor guard.
Key Benefits
- Pulls 12,280 CFM to clear stale shop heat, smoke, fumes, and humidified evaporative exhaust
- G90 galvanized steel slant housing and discharge cone withstand outdoor weather exposure
- Full-chord cogged V-belt and belt tensioner maintain steady traction without slipping
- Built-in cam-lock shutter latches let you snap on the optional 6611-9022 shutter without tools
- Dual-voltage 115/230V motor adapts easily to common single-phase commercial circuits
Technical Specifications
| Specification | Value | Unit |
|---|---|---|
| Brand | PolarCool | |
| Series | PolarCool Industrial Exhaust Fan | |
| Model Number | 6603-7011 | |
| Fan Diameter | 36 | in |
| Propeller Type | 4-Blade Galvanized Steel | |
| Airflow Capacity | 12,280 | CFM |
| Recommended Air Exchange Rate | 10 | min/change |
| Drive Type | Belt Drive (Full-Chord Cogged V-Belt with Tensioner) | |
| Speed Settings | 1 Speed (1,725 RPM) | |
| Motor Rating | 1/2 HP, 1,725 RPM, 1.0 Service Factor | |
| Electrical Supply | 115/230 | VAC, 1-Phase, Hardwired |
| Operating Current | 5.5 at 115V / 2.7 at 230V | A |
| Power Cord | Not Included (Hardwired by Certified Electrician) | |
| Housing Material | G90 Galvanized Steel Slant Housing, Cone and Guard | |
| Slant Housing Intake Area | 39.5 x 39.6 | in |
| Slant Housing Depth | 32.5 Top / 24 Bottom | in |
| Discharge Cone Diameter | 36.9 | in |
| Assembled Dimensions (L x W x H) | 59 x 45.5 x 46.5 | in |
| Wall Rough Opening (W x H) | 42.75 x 43.75 | in |
| Multi-Fan Center Spacing | 50 | in |
| Minimum Exhaust Path Clearance | 3 ft from cone (obstructions under 12 in wide or 30% of diameter) | |
| Unit Weight (Fan + Cone, No Shutter) | 211 | lbs |
| Shipping Weight | 211 Standalone (338 With Shutter per Cut Sheet 4802-2034A) | lbs |
| Recommended Optional Shutter | 36 in Aluminum Exhaust Fan Shutter (SKU 6611-9022, Sold Separately) | |
| Manufacturer Warranty | 1 Year Motor and Electrical Components / Lifetime Metal Housing |
Compatibility & Fitment
- Compatible With: 36 in Aluminum Exhaust Fan Shutter (SKU 6611-9022) via tool-free cam-lock latches
- Compatible With: 115V or 230V single-phase hardwired circuits per NEC
- Compatible With: Cross-draft pairing opposite PolarCool SS-Pro Wall-Mount Evaporative Coolers (6622-7006)
- Not Compatible With: Three-phase power without a 115V or 230V single-phase branch circuit
- Not Compatible With: Standard plug-in wall outlets (no power cord included)
- Not Compatible With: Explosion-proof or corrosive chemical vapor hoods not rated for standard galvanized motors
- Not Included: 36 in Aluminum Exhaust Fan Shutter (SKU 6611-9022)
- Not Included: Power cord, electrical disconnect, conduit, and hardwiring
- Not Included: Wall framing material, mounting screws, and lifting hoist/forklift
- Not Rated For: Unventilated rooms without makeup-air intake openings
- Not Rated For: Explosive dust or hazardous classified locations
- Not Rated For: Exhaust paths blocked within 3 ft by wide walls or awnings over 12 in wide
Frequently Asked Questions
What size wall rough opening is needed for the PolarCool 36 in Exhaust Fan (6603-7011)?
PolarCool framing table 4802-2029A and cut sheet 4802-2034A specify a 42.75 in wide by 43.75 in tall rough opening, with at least 50 in center-to-center spacing when mounting fans side by side.
Is the aluminum shutter included with SKU 6603-7011?
No. On polarcoolstore.com the 6603-7011 is sold as the standalone fan, slant housing, cone, and guard (211 lbs); pair it with the 36 in Exhaust Fan Shutter (SKU 6611-9022, sold separately) for backdraft and rain protection.
How is the PolarCool 36 in Exhaust Fan wired and does it come with a cord?
No power cord is included. A certified electrician must hardwire the dual-voltage 115/230V single-phase 1/2 HP motor (5.5A at 115V or 2.7A at 230V) in compliance with NEC and local codes.
How do you calculate how many 6603-7011 exhaust fans a building needs?
Multiply building length by width by average ceiling height, divide by 12,280 CFM, divide by a 10-minute air exchange target, and round up — always ensuring matching open intake air on the opposite side.
Compliance & Warranty
Installation and electrical hookup by a licensed electrician or qualified HVAC contractor in accordance with NEC and local building codes is required to maintain warranty coverage. Per PolarCool Slant-wall Exhaust Fan Manual 4802-2029A, HH Technologies, Inc. (PolarCool) warrants the motor and electrical components for 1 year from invoice date and warrants the metal housing for the lifetime of the product against defects in material or workmanship upon factory-authorized inspection (excluding ordinary wear and tear, labor, freight, and non-PolarCool parts). Life-support applications require backup ventilation. Have a question on sizing, electrical hookup, or replacement parts before you order? Reach out anytime — we always reply back.





Reviews
There are no reviews yet.