The PolarCool Classic 36″ Portable Evaporative Cooler (6622-1200) combines an all-metal black powder-coated steel body, integrated forklift channels, and five 8-inch deep CELdek pads to move 10,000 CFM over 3,200 sq ft.
Why Choose This Configuration: Real-World Value & Install Math
- Deeper 8-Inch Pad Bank (20 sq ft Area / 13.33 cu ft Volume): Compared with the 6 in pad pack on the 36 in Pro models (16 sq ft / 8 cu ft), the Classic holds five 8 in thick CELdek pads for greater air-to-water contact time.
- Built-In Forklift Channels + 481 lb All-Steel Weight: Integrated lower pockets let your lift crew relocate the 6622-1200 across large warehouse bays, and the all-metal chassis shrugs off shop bumps.
- Quiet Published Sound Ratings (22 dB Med / 31 dB High): Cut sheet 4802-9119F lists 22 dB on medium and 31 dB on high with a 10-speed direct-drive control panel so you can hold conversations nearby.
- Honest Trade-Off: With a 12.5-gallon reservoir and a 12 GPH consumption rate at 90 F+, the Classic 36 in is built to stay hooked to a 3/4 in garden hose or 90-gal water cart rather than running long shifts untethered, and its 36 in depth will not fit through narrow interior doorways.
Overview
If your facility already has hose drops along columns or loading docks and you prioritize heavy all-metal durability over internal water storage, the PolarCool Classic 6622-1200 is the heavyweight 36-inch workhorse. It pairs a powder-coated galvanized steel body with five extra-deep 8 in CELdek pads, 10-speed touchpad control with LED indicators, automatic low-water pump shutoff, and UL 507 certification.
System Components
- PolarCool Classic 36″ direct-drive portable cooler with all-metal black powder-coated galvanized steel cabinet and integrated forklift channels
- 3-blade fiberglass propeller (6403-5600), 1/2 HP 115V variable-speed motor (3017-5600), and 120V water pump (6422-0645)
- 12.5-gal metal sump with automatic low-water pump shutoff (3001-0050), float valve (1009-0107), and 3/4 in drain outlet (0006-7010)
- Five 12 in W x 48 in H x 8 in D edge-coated CELdek pads (replacement set 6450-6010) behind a hinged top maintenance lid
- 10-speed LED touchpad control panel (6450-6060), 4 x 6 in heavy-duty casters (kit 6450-6051), and 20 ft GFCI power cord (6422-4004)
Installation Requirements & Accessories
- Dedicated grounded 115-120V, 60 Hz outlet (8.5A running / 10A consumption rating) within reach of the 20 ft GFCI cord
- Continuous 3/4 in garden hose connection recommended because the 12.5-gal sump drains quickly at 12 GPH without steady make-up water
- Doorway or bay clearance check before roll-in: cabinet measures 61 in W x 63 in H x 36 in D (crated 69 x 70 x 43 in, 545 lbs)
- Open cross-ventilation (doors, windows, or exhaust fans) and ambient humidity below 60% RH
- Not Included: Water supply hose, drain hose, Classic 36 in Protective Cover (6421-13012), and 90-Gal Water Cart (6540-1809)
- Not Compatible With: Standard interior man-doors narrower than 36 in without forklift dock entry, sealed rooms, or 6 in Pro replacement pads (6450-6014)
Pro-Installer Tip
The Classic 36 in moves 10,000 CFM through a compact 12.5-gallon sump, so air exchange and clean float-valve flow matter even more. Always confirm fresh outdoor intake air on the pad side and an open bay door downstream so moisture never builds up indoors. Keep your water supply open via a clean 3/4 in garden hose line, flush the 12.5-gallon reservoir weekly to avoid hard-water scale on the five 8 in CELdek pads, and run the unit only where relative humidity sits below 60% RH with the GFCI plug tested monthly.
Key Benefits
- Thick 8 in CELdek pad bank (20 sq ft area, 13.33 cu ft media volume) maximizes evaporative air contact
- All-metal galvanized steel housing with forklift pockets stands up to heavy warehouse and shop transport
- Variable 10-speed LED touchpad panel lets you match airflow and sound (22 dB Med / 31 dB High) to the shift
- Automatic low-water shutoff safeguards the 120V pump if a hose line gets kinked or shut off
- UL 507 listed with 20 ft GFCI power cord and 3-year factory warranty on motor, pump, electronics, and housing
Technical Specifications
| Specification | Value | Unit |
|---|---|---|
| Brand | PolarCool | |
| Series | PolarCool Classic | |
| Model Number | 6622-1200 | |
| Fan Diameter | 36 | in |
| Propeller Type | 3-Blade Fiberglass (Part 6403-5600) | |
| Airflow Capacity | 10,000 | CFM |
| Effective Cooling Area | 3,200 | sq ft |
| Drive Type | Direct Drive | |
| Speed Settings | 10-Speed Variable (Touchpad Control Panel 6450-6060 with LED Indicators) | |
| Motor Rating | 1/2 HP, 115V, 60 Hz Variable-Speed (Part 3017-5600) | |
| Electrical Supply | 115-120 | VAC, 60 Hz, 1-Phase |
| Operating Current | 8.5 | A |
| Power Consumption Rating | 10 | A at 115V, 60 Hz |
| Power Cord | 20 ft, 120VAC with Inline GFCI Plug (Part 6422-4004) | |
| Sound Pressure Level | 22 Medium / 31 High | dB |
| Reservoir Capacity | 12.5 | Gallons |
| Water Consumption Rate | 12 | GPH |
| Rated Water Rate Ambient | At least 90 F | |
| Effective Humidity Ceiling | Below 60% RH | |
| Low-Water Pump Shutoff | Equipped (Automatic Liquid Level Switch 3001-0050) | |
| Water Pump | 120V, 60 Hz Submersible Pump (Part 6422-0645) | |
| Cooling Media | 5 Pads – Edge-Coated CELdek 12 in W x 48 in H x 8 in D (Set 6450-6010) | |
| Cooling Media Surface Area | 20 | sq ft |
| Cooling Media Volume | 13.33 | cu ft |
| Water Inlet Connection | 3/4 in Standard Garden Hose with Float Valve (Part 1009-0107) | |
| Drain Outlet Connection | 3/4 in Garden Hose Adapter (Part 0006-7010) | |
| Housing Material | All-Metal Galvanized Steel with Black Powder Coat and Forklift Channels | |
| Mobility / Mounting | 4 x 6 in Heavy-Duty Rubber Casters (2 Fixed, 2 Locking Swivel – Kit 6450-6051) | |
| Unit Dimensions (W x H x D) | 61 x 63 x 36 | in |
| Unit Weight (Empty / Full) | 481 Empty / 585 Full | lbs |
| Shipping Dimensions (W x H x D) | 69 x 70 x 43 | in |
| Shipping Weight | 545 | lbs |
| Safety Certification | UL 507 Listed | |
| Manufacturer Warranty | 3 Years Motor, Pump, Electronics and Powder-Coated Housing |
Compatibility & Fitment
- Compatible With: Standard grounded 115-120V, 60 Hz outlets with 20 ft GFCI cord
- Compatible With: Continuous 3/4 in garden hose supply and PolarCool 90-Gal Water Cart (6540-1809)
- Compatible With: Classic 36 in 8 in Pad Kit (6450-6010), Single Pad (6450-6068), and Classic 36 in Cover (6421-13012)
- Not Compatible With: 230-240V circuits or three-phase electrical systems
- Not Compatible With: PolarCool Pro 36 in 6 in pads (6450-6014) or Pro 36 in cover (6521-0051)
- Not Compatible With: Standard interior doorways narrower than 36 in (unit depth is 36 in)
- Not Included: Garden water supply hose and drain hose
- Not Included: PolarCool 90-Gallon Water Cart (6540-1809)
- Not Included: Classic 36 in Protective Cover (6421-13012)
- Not Rated For: Closed rooms without open exhaust airflow
- Not Rated For: Operating areas consistently above 60% RH
- Not Rated For: Long untethered shifts without continuous water supply
Frequently Asked Questions
How does the PolarCool Classic 6622-1200 differ from the Pro 6622-6000?
The Classic 6622-1200 uses an all-metal powder-coated steel housing (481 lbs empty) with built-in forklift channels and five 8 in thick CELdek pads, whereas the Pro 6622-6000 trades metal sump weight for a 38-gallon rotomolded tank, narrower 29 in depth, and four 6 in pads.
Do you need a constant water hose hookup on the Classic 36 in?
Yes, with a 12.5-gallon sump and 12 GPH consumption at 90 F or warmer, plan on keeping a 3/4 in garden hose attached or pairing it with the 90-gallon water cart.
What are the physical dimensions and shipping weight of the 6622-1200?
Cut sheet 4802-9119F and manual 4801-5035V list unit dimensions of 61 in W x 63 in H x 36 in D, weight of 481 lbs empty (585 lbs full), and crated shipping weight of 545 lbs.
How quiet is the Classic 36 in evaporative cooler?
PolarCool cut sheet 4802-9119F rates sound pressure at 22 dB on medium and 31 dB on high across its 10-speed range.
Compliance & Warranty
Operation on a properly grounded circuit matching the nameplate voltage and amperage rating, along with routine water and cooling-pad maintenance per the PolarCool Owner’s Manual, is required to maintain warranty coverage. PolarCool (HH Technologies, Inc.) warrants the motor, electrical components, and black powder-coated metal housing of the 6622-1200 for 3 years from invoice date when factory-authorized inspection confirms a material or workmanship defect (excluding labor, freight, wear items, and unauthorized modifications or parts). Have a question on sizing, electrical hookup, or replacement parts before you order? Reach out anytime — we always reply back.













Reviews
There are no reviews yet.