This is the wall mounting bracket for the Simpliphi 3.8kWh battery, built for installers who need a secure, code-compliant way to get that battery off the floor and onto a wall.
A wall-mounted battery install isn't just a space saver — it's a mechanical safety decision. A battery that isn't properly secured to a rated bracket is a fall hazard and a stress point on its own internal terminals and cabling. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Designed specifically for the Simpliphi 3.8kWh battery.
- SKU: B-3.8-ASMB/
- NOT confirmed compatible with other Simpliphi battery capacities [NEEDS VERIFICATION].
- NOT intended for use with battery brands other than Simpliphi.
- Wall construction/stud spacing requirements not specified in current data — verify wall substrate can support battery weight before install [NEEDS VERIFICATION].
A bracket that isn't fully seated against the wall surface creates a pivot point — over time, vibration and thermal cycling can loosen the fasteners and let the battery shift, straining the DC cable terminals at the battery lugs. Confirm every mounting fastener is torqued to the bracket manufacturer's spec before you hang the battery, and re-check torque after the first 30 days of service. Use a digital torque wrench, not a standard drill driver, to avoid over- or under-torquing into drywall anchors or studs. This matches the general code-compliance principle behind NEC Article 110 requirements for secure equipment mounting — an unsecured battery enclosure is treated as an installation deficiency, not just an aesthetic issue.
Key Benefits
- Purpose-built to the mounting geometry of the Simpliphi 3.8kWh battery.
- Gets the battery off the floor, reducing risk of impact damage and moisture exposure at ground level.
- Frees floor space in tight utility rooms or enclosures.
- Simplifies inspection access to battery terminals and cabling once wall-mounted.
| Spec | Value | Unit |
|---|---|---|
| SKU | B-3.8-ASMB/ | — |
| Compatible Battery | Simpliphi 3.8kWh | — |
| Price | 148.99 | USD |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: Simpliphi 3.8kWh battery.
- Does NOT fit: other Simpliphi battery capacity models [NEEDS VERIFICATION].
- Does NOT fit: battery brands other than Simpliphi.
| Compliance Item | Value |
|---|---|
| UL Listing | [NEEDS VERIFICATION] |
| IP Rating | [NEEDS VERIFICATION] |
| NEC Reference | [NEEDS VERIFICATION] |
FAQ
Which Simpliphi battery does this bracket fit?
This bracket is built for the Simpliphi 3.8kWh battery. It is not confirmed to fit other Simpliphi battery capacities.
Does this bracket include hardware for mounting to the wall stud or wall surface?
Mounting hardware details are not specified in current manufacturer data. Refer to the Resources tab for the installation manual before you order.
Is this bracket rated for outdoor installations?
Environmental rating (IP rating) is not specified in current manufacturer data. Confirm with the Resources tab or contact us before an outdoor install.
Can I use this bracket with a different brand's battery?
No. This bracket is designed around the physical mounting points and weight profile of the Simpliphi 3.8kWh battery. It is not intended for other brands' batteries.
Warranty & Registration
Manufacturer warranty terms for this bracket are not included in current data. Refer to the "Resources (System Manuals and Warranty)" Tab above for warranty documentation, or contact us before you order if you need terms confirmed in writing.
