This kit bundles four BigBattery Husky 2 batteries wired for 24V output, along with a charger, capacity meter, and cabling to get a 24V system running. It's built for RV, camper van, commercial vehicle, and off-grid backup use where you need dependable 24V power in a compact footprint.
Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Why This Kit
BigBattery builds these packs around LiFePO4 cells as a lead-acid replacement for 24V applications. The Husky 2 line is positioned for demanding environments — the manufacturer notes tolerance for intense heat and cold, plus vibration resistance, which matters for mobile installs like Class A/B/C RVs, camper vans, commercial vehicles, and food trucks. This kit is also suited to emergency backup and compact storage use where space is limited.
Battery Characteristics
Chemistry: LiFePO4 (Lithium Iron Phosphate). This kit contains four Husky 2 battery units configured to deliver 24V nominal system voltage. Group size and individual unit dimensions are not specified in the source data for this listing — refer to the Resources tab for the manufacturer's dimensional drawings.
Wiring & Configuration Limits
This kit is pre-configured as a 4-unit pack wired to produce 24V nominal output. The manufacturer data provided does not specify additional series/parallel expansion limits beyond this kit configuration. [NEEDS VERIFICATION] for maximum series/parallel expansion beyond the included 4x Husky 2 arrangement.
Do not mix this kit with lead-acid, AGM, or Gel batteries in the same bank. Do not combine batteries of different ages or cycle histories in series or parallel strings.
Pro-Installer Tip
Wiring lithium packs of mismatched age or state of charge into the same series/parallel bank is a common cause of premature BMS lockout and cell imbalance — even within the same product line. Before connecting this 4-unit kit to any existing bank, verify all packs sit at a similar state of charge and have comparable cycle counts. This prevents one weaker unit from dragging down the whole string over time. Use a shunt-based battery monitor to track pack-level voltage and current independently rather than relying on a single system-wide reading. As a professional standard, plan discharge cycles in the 80-100% DoD range typical for LiFePO4, but confirm the BMS-rated continuous discharge limit before sizing your inverter load.
Key Benefits
- LiFePO4 chemistry as a direct lead-acid replacement for 24V systems
- Rated by the manufacturer for intense heat and cold tolerance
- Vibration resistant construction suited to mobile and vehicle-based installs
- Compact storage footprint for space-constrained applications
- Includes charger, capacity meter, and cabling in one kit
Technical Table
| Spec | Value |
|---|---|
| Nominal Voltage | 24V |
| Chemistry | LiFePO4 |
| Kit Configuration | 4x Husky 2 batteries |
| Included Components | Charger, capacity meter, ring-terminal cables, parallel comm cable |
| Product Type | Golf Cart |
| Capacity (Ah / Wh) | [NEEDS VERIFICATION] |
| Max Continuous Discharge (A) | [NEEDS VERIFICATION] |
| Peak Discharge (A) | [NEEDS VERIFICATION] |
| Cycle Life | [NEEDS VERIFICATION] |
| Dimensions | [NEEDS VERIFICATION] |
| Weight | [NEEDS VERIFICATION] |
| Terminal Type | [NEEDS VERIFICATION] |
| Operating Temp Range | [NEEDS VERIFICATION] |
| Low-Temp Charging Protection | [NEEDS VERIFICATION] |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
This kit is designed for 24V applications, including Class A, B, and C RVs, camper vans, commercial vehicles, food trucks, emergency backup systems, and compact storage installs where vibration resistance and temperature tolerance matter.
This kit is NOT intended as a like-for-like drop-in for every lead-acid form factor — verify physical clearance and mounting before install. Standard lead-acid chargers are NOT recommended for this pack; use only a charger rated for LiFePO4 charge profiles. Do not wire this kit in series or parallel with lead-acid, AGM, or Gel batteries. BMS continuous discharge and peak discharge ratings are not specified in available data — confirm against your inverter's draw requirements before use in [NEEDS VERIFICATION].
FAQ
What chemistry is used in this kit?
The Husky 2 batteries in this kit use LiFePO4 (Lithium Iron Phosphate) chemistry.
What voltage does this kit produce?
The kit is configured for 24V nominal output using four Husky 2 batteries.
Can I mix this kit with my existing lead-acid batteries?
No. Do not wire this kit in series or parallel with lead-acid, AGM, or Gel batteries.
Does this kit include a charger?
Yes. The kit includes a charger along with a capacity meter and connecting cables.
Is this kit vibration resistant for vehicle use?
The manufacturer specifies vibration resistance suited to RVs, camper vans, and commercial vehicle applications.
Warranty & Support
Warranty terms for this kit are not included in the data provided here — check the "Resources (System Manuals and Warranty)" tab above for the manufacturer's warranty documentation. If you have questions about fitment or configuration before you order, ask us — we always reply back.
