This is a complete wall-mounted evaporative cooling package for warehouses, shops, and commercial buildings — it pairs the 36" stainless steel Pro fan with the wall mounting kit so you're not sourcing components separately.
The 36" SS Pro + Wall Mount Kit Combo is built for facilities that need cooling capacity without giving up floor space — warehouses, manufacturing plants, distribution centers, automotive shops, and food processing environments where forklifts, storage, and foot traffic compete for room. The 304 stainless steel fan housing is suited to hygienic and corrosive-exposure environments, including food processing and agricultural facilities. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
System Components
- 36" evaporative cooling fan, 304 stainless steel construction
- Wall-mount galvanized brackets in place of standard casters
- Premium evaporative cooling media
- Heavy-duty motor rated for continuous operation
- Integrated water distribution system
- Weather-resistant, exterior-grade components throughout
- Wall Mounting Kit (6540-1060): heavy-duty galvanized metal mounting components, building attachment hardware, and structural support system
Installation Requirements & Accessories
- Mounting location: exterior building wall
- Control: remote-mounted controller, pre-wired for connection — hardwiring required by installer
- Recommended addition (sold separately): 36" RollSeal Shutter (6621-0300-HH)
- Additional materials likely required: building framing, electrical wiring, water supply connections, drainage, and sealing materials
- Casters are NOT included — this configuration is wall-mount only, not floor-mount
- RollSeal shutter, electrical wiring, water supply connections, drainage, and sealing materials are NOT included in this combo
Pro-Installer Tip
Evaporative cooling only works when displaced humid air has somewhere to go — wall-mounted units perform best when installed opposite an exhaust fan or open door so the building maintains negative pressure and a continuous air exchange. Without that cross-draft path, humidity builds up near the unit and can lead to condensation on interior surfaces over time. When planning the installation, position units to face exhaust points directly and verify the water distribution system and drainage lines are sealed and draining properly before startup. As with all evaporative systems, performance drops in humid climates — this equipment is most effective in relative humidity below 60%, and water usage should be monitored as part of routine facility water conservation practices.
Key Benefits
- Wall mounting eliminates floor footprint, freeing space for storage, equipment, and workflow
- Creates permanent, fixed cooling infrastructure rather than a relocatable floor unit
- Remote controller allows operation from inside the building without accessing the exterior unit
- Supports cross-draft cooling when multiple units are positioned opposite exhaust fans or open doors
- Keeps equipment out of the path of forklifts, carts, and personnel traffic
- 304 stainless steel construction resists corrosion and holds up to outdoor exposure with low maintenance
Technical Table
| Spec | Value | Unit |
|---|---|---|
| Fan Size | 36 | in |
| Construction Material | 304 stainless steel | — |
| Mounting Type | Wall-mount galvanized brackets | — |
| Casters Included | No | — |
| Pad / Cooling Media Type | Premium evaporative cooling media | — |
| Control Type | Remote-mounted, pre-wired, hardwiring required | — |
| Included Components | 6622-7001 fan + 6540-1060 mounting kit | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Compatible with exterior wall-mount installation using the included galvanized brackets and structural support system
- Compatible with the 36" RollSeal Shutter (6621-0300-HH), sold separately, as a recommended addition
- Not compatible with floor-mount/caster-based setups — casters are not included in this configuration
- Not included: building framing, electrical wiring, water supply connections, drainage materials, and sealing materials
- Not included: 36" RollSeal Shutter (6621-0300-HH) — must be ordered separately
FAQ
Does this unit require a continuous water connection?
The fan includes a water distribution system, but water supply connections and drainage materials are not included and must be provided during installation. [NEEDS VERIFICATION] on reservoir capacity and continuous fill float valve details.
Can this be used indoors without open windows?
No. This is an exterior wall-mounted unit designed to introduce cooled air into a building. It performs best as part of a cross-draft configuration with exhaust fans or open doors on the opposite side of the space.
What kind of power outlet is required?
The controller is pre-wired for remote connection but requires hardwiring by a qualified installer. Specific voltage and amperage figures are [NEEDS VERIFICATION] — refer to the manufacturer Resources tab for electrical specifications.
Is the mounting kit sold separately from the fan?
No, not in this listing. This combo (6622-7006) bundles the 36" SS Pro Wall Mount Model (6622-7001) with the Wall Mounting Kit (6540-1060) as a single package.
Compliance & Warranty
Warranty terms are [NEEDS VERIFICATION] — refer to the manufacturer Resources tab above for full warranty documentation. Safety and compliance certifications (UL/ETL or similar) are [NEEDS VERIFICATION] and not confirmed in the source data provided.
