This is a wall-sleeve air conditioner with electric heat, built for hotel rooms, apartments, or additions near saltwater where standard units corrode. It's a 265V commercial unit suited for property managers and coastal building owners who need self-contained, per-room climate control with added corrosion resistance.
The PTC154J50CXXX is built on Amana's PTC chassis for hospitality and multi-family properties in coastal or high-corrosion environments, where the Seacoast Protection feature (Feature Code C) is specified to extend equipment life. AHRI-rated performance data for this configuration includes 14,800 BTU/h cooling and 10.7 EER. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fit & Power Requirements
- Wall Sleeve: Fits industry-standard 42 in wide x 16-1/16 in high openings (WS900E / WS900QW series).
- Wall Sleeve is NOT included and must be ordered separately.
- Exterior Architectural Grille is NOT included and must be ordered separately.
- Voltage: 265V commercial. Valid operating range 239V minimum / 292V maximum.
- Electric Heat: 5.0 kW, single stage, 17,100 BTU/h heating output at 265V.
- Total Amps with heater: 19.2A. MCA: 23.9A. MOP: 25A.
- Power Cord: NEMA 7-30P.
- This 265V unit requires an Amana sub-base (PTSB4**E series) or hardwire kit PTPWHWK4 with disconnect PSHW04A. Neither is included.
- This unit ships with factory-installed cartridge-style time-delay fuses appropriate for 265V service.
- Not compatible with 115V circuits.
- Not compatible with 230/208V circuits — the 230/208V version of this chassis is model PTC153J.
- Not a drop-in fit for non-standard sleeve openings outside 42 in x 16-1/16 in.
On 265V hospitality jobs, the recurring failure point is techs grabbing a standard LCDI cord assumption or mismatching the receptacle to the sub-base — this unit needs the Amana PTSB4**E sub-base or the PTPWHWK4/PSHW04A hardwire kit, not the plug-and-cord setup used on 230/208V chassis. Confirm receptacle configuration against a NEMA Receptacle Chart before rough-in, since a 7-30P cord end on a mismatched sub-base is a callback and a fire-code violation waiting to happen. Independently, when the sleeve goes in, pitch it 1/4 bubble toward the exterior using a torpedo level — this keeps condensate draining outward instead of pooling against interior drywall, which is the #1 cause of hidden water damage claims in hotel PTAC installs. Both practices align with NEC receptacle/overcurrent protection requirements and standard property-management commissioning checklists for coastal properties.
Key Benefits
- 14,800 BTU/h cooling capacity with 10.7 EER for per-room load matching.
- 4.4 pints/hour dehumidification rate for guest comfort in humid coastal climates.
- 65 CFM fresh-air ventilation intake for make-up air in enclosed guest rooms.
- 5.0 kW electric heat strip delivers 17,100 BTU/h supplemental heating at 265V.
- Seacoast Protection (Feature Code C) corrosion treatment for near-ocean installations.
- R-32 refrigerant, meets or exceeds ASHRAE 90.1 efficiency standards.
| Spec | Value | Unit |
|---|---|---|
| Cooling Capacity | 14,800 | BTU/h |
| Heating Capacity (265V, Electric Heat) | 17,100 | BTU/h |
| Electric Heat Strip Size | 5.0 | kW |
| Heat Strip Stages | 1 | stage |
| EER | 10.7 | — |
| Voltage | 265 | V |
| Compressor Amps | 6.3 | A |
| Compressor Watts | 1,380 | W |
| Total Heater Watts | 5,070 | W |
| Total Amps (with Heater) | 19.2 | A |
| Minimum Circuit Ampacity (MCA) | 23.9 | A |
| Maximum Overcurrent Protection (MOP) | 25 | A |
| NEMA Plug Type | 7-30P | — |
| MCA (Chassis, No Heater) | 7.4 | A |
| CFM Wet High/Low | 400/314 | CFM |
| CFM Dry High/Low | 414/414 | CFM |
| Ventilation CFM | 65 | CFM |
| Dehumidification Rate | 4.4 | pints/hr |
| Net Weight | 113 | lb |
| Shipping Weight | 130 | lb |
| Refrigerant Type | R-32 | — |
| Wall Sleeve Dimensions | Standard 42 x 16-1/16 | in |
| Wall Sleeve Included | Not Included | — |
| Exterior Architectural Grille Included | Not Included | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits industry-standard 42 in wide x 16-1/16 in high wall sleeve openings (WS900E / WS900QW series and compatible variants).
- Compatible with 265V commercial circuits (239V–292V operating range) via NEMA 7-30P power cord, paired with a required Amana sub-base or hardwire kit.
- Not compatible with 115V circuits.
- Not compatible with 230/208V circuits — for that voltage, see chassis model PTC153J.
- Wall Sleeve NOT included — order separately (WS900E, WS900QW, WS900SC seacoast, or other listed sleeve variants).
- Exterior Architectural Grille NOT included — order separately (SGK, AGK, or PGK series).
- Not a drop-in replacement for non-standard or custom sleeve openings.
| Compliance Item | Detail |
|---|---|
| Refrigerant Type | R-32 |
| Efficiency Standard | Meets or exceeds ASHRAE 90.1 |
| Electrical Code | 265V units require factory-installed cartridge-style time-delay fuses; overcurrent protection per NEC and MOP rating of 25A |
| LCDI Cord Compliance | Not applicable — LCDI power cords apply only to units under 250V; this 265V unit uses a hardwire/sub-base connection per UL requirements for that voltage class |
FAQ
Is the wall sleeve included with this unit?
No. The wall sleeve is sold separately. This unit is designed to fit the industry-standard 42 in wide x 16-1/16 in high opening (WS900E / WS900QW series), but the sleeve, drain kit, and exterior grille must be ordered separately.
What breaker size and plug type does this unit require?
With the 5.0 kW electric heat strip installed, this 265V unit has a Minimum Circuit Ampacity of 23.9A and a Maximum Overcurrent Protection rating of 25A. It ships with a NEMA 7-30P power cord.
Can this be hardwired for 265V commercial applications?
Yes. This 265V model requires an Amana brand sub-base (PTSB4**E series) or the PTPWHWK4 hardwire kit with PSHW04A disconnect switch. These are not included and must be ordered separately. It also requires factory-installed cartridge-style time-delay fuses.
Does this require a licensed electrician or HVAC professional to install and keep the warranty valid?
[NEEDS VERIFICATION] - Installer licensing requirements are not specified in the provided source files. Refer to the manufacturer warranty document in the Resources tab for installation terms.
Will this fit a standard 42-inch by 16-inch wall sleeve opening?
Yes. This chassis fits the industry-standard 42 in wide x 16-1/16 in high wall sleeve opening. It is not a drop-in fit for non-standard or custom sleeve openings.
Warranty & Registration
This unit carries a 1-Year Repair/Replace warranty and a 5-Year Parts Limited Warranty on the sealed system, per manufacturer badge documentation. Exact terms, including any distinctions between residential and commercial hospitality usage, are detailed in the warranty PDF found in the "Resources (System Manuals and Warranty)" Tab above on this page. Ask us before you order if you need help confirming warranty terms for a commercial hospitality install — we always reply back.
