This is the conduit box accessory for the EG4 Stride wall-mount indoor battery. It gives you a dedicated, code-friendly entry point for routing wiring into the battery enclosure instead of drilling or improvising a knockout.
The Stride conduit box is purpose-built sheet-metal hardware designed to mate with the EG4 Stride indoor wall-mount battery cabinet. It gives installers a defined wiring entry point instead of an improvised opening, which matters for both inspection sign-off and long-term enclosure integrity. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Designed specifically for the EG4 Stride wall-mount indoor battery.
- Indoor-rated accessory - matches the indoor rating of the Stride battery it mounts to.
- NOT compatible with the EG4 AllWeather WallMount Battery.
- NOT compatible with EG4 Server Rack, Free Standing, Stackable, or Mobile/Golf battery lines.
- NOT rated for outdoor or all-weather installation.
- Wire gauge, ampacity, and terminal lug dimensions: [NEEDS VERIFICATION] - not provided in manufacturer data.
Field friction: conduit entries into battery enclosures are a common spot for pinched conductors and compromised strain relief, especially when installers force oversized cable through an undersized knockout. Left unaddressed, chafed insulation at the entry point can lead to intermittent grounds or, in a worst case, a short that trips a fault code or contributes to a thermal event inside the enclosure. Before final closeout, dry-fit your conductors through the conduit box and check clearance with a set of calipers or a go/no-go gauge rather than eyeballing it, then verify lug torque at the battery terminal with a digital torque wrench to the battery manufacturer's spec. Document the conduit fill and torque values against NEC Chapter 9 conduit fill tables and the battery's listed terminal torque spec as part of your commissioning paperwork.
Key Benefits
- Purpose-matched fit to the Stride wall-mount indoor battery enclosure - no field modification of the cabinet required.
- Gives you a defined, inspectable wiring entry point rather than a drilled knockout.
- Indoor-rated construction consistent with the Stride battery's indoor use case.
- Simplifies code-compliant conduit termination at the battery enclosure.
| Spec | Value | Unit |
|---|---|---|
| Compatible System | EG4 Stride Wall Mount Indoor Battery | - |
| Environment Rating | Indoor | - |
| SKU | EG4CONDUITBOXSWM | - |
| Price | 347.99 | USD |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: EG4 Stride wall-mount indoor battery.
- Does NOT fit: EG4 AllWeather WallMount Battery.
- Does NOT fit: EG4 Server Rack, Free Standing, Stackable, or Mobile/Golf battery models.
- NOT rated for outdoor exposure - indoor use only, matching the Stride battery's indoor rating.
| Compliance Item | Detail |
|---|---|
| UL Listing | [NEEDS VERIFICATION] - not provided for this conduit box accessory |
| IP Rating | [NEEDS VERIFICATION] - not provided |
| NEC Reference | Verify conduit fill and entry point wiring against NEC conduit fill requirements at install |
FAQ
Does this conduit box fit any EG4 wall-mount battery?
No. It is built specifically for the EG4 Stride wall-mount indoor battery enclosure. It is not confirmed to fit the EG4 AllWeather wall-mount battery or other EG4 battery form factors.
Is this conduit box rated for outdoor installations?
No. This is an indoor-rated accessory for the indoor-rated Stride wall-mount battery. It is not intended for outdoor or all-weather enclosures.
What wire gauge or terminal lug size does this conduit box support?
[NEEDS VERIFICATION] - the manufacturer data provided does not list a specific gauge or lug size for this conduit box.
Does this include mounting hardware?
[NEEDS VERIFICATION] - hardware contents are not specified in the manufacturer data provided for this item.
Warranty & Registration
Manufacturer warranty terms specific to this conduit box accessory are [NEEDS VERIFICATION]. For the governing warranty document covering the EG4 Stride wall-mount battery system and its accessories, refer to the "Resources (System Manuals and Warranty)" Tab above on this page. Ask us before you order if you need the warranty document confirmed for your specific install.
