This is the conduit box accessory for EG4's 100Ah indoor wall-mount battery — it gives you a code-compliant wiring entry point for hardwired conduit runs into the battery enclosure.
The conduit box is a wiring accommodation part for indoor ESS installations — it routes and protects field wiring where it enters the battery enclosure, keeping the termination point enclosed and inspection-ready. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Designated for: EG4 100Ah Indoor Wall Mount Battery.
- Indoor Rated — not intended for outdoor or exposed-weather mounting locations.
- Wire gauge capacity, conduit knockout size, and terminal/lug size are not specified in available manufacturer data [NEEDS VERIFICATION].
- NOT confirmed compatible with EG4 280Ah or 314Ah Indoor Wall Mount Battery models — do not assume cross-fitment [NEEDS VERIFICATION].
- NOT rated for outdoor/AllWeather EG4 battery enclosures based on available data [NEEDS VERIFICATION].
Conduit entry points are a common source of loose or pinched conductors after a battery is buttoned up for inspection. Once wire is routed through the conduit box, check every termination for full seating before you close the enclosure — a loose connection at this stage causes resistive heating and nuisance fault codes months later, not on day one. Verify torque on any lugs or gland fittings with a digital torque wrench set to the manufacturer's spec sheet found under the Resources tab, since torque values are not listed on this page. Confirm your conduit fill and conductor sizing against the NEC ampacity tables for the circuit before final closeout — this is standard practice for any hardwired ESS termination, not just EG4 hardware.
Key Benefits
- Provides an enclosed, inspection-ready wiring entry point for the EG4 100Ah Indoor Wall Mount Battery.
- Indoor-rated construction matched to the battery's intended installation environment.
- Keeps conduit terminations contained and protected from accidental contact.
- Purpose-built accessory rather than a universal fit part, reducing guesswork on physical mounting to the battery enclosure.
| Spec | Value | Unit |
|---|---|---|
| Compatible Battery | EG4 100Ah Indoor Wall Mount Battery | — |
| Environment Rating | Indoor | — |
| SKU | EG4CONDUITBOXWM100A | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: EG4 100Ah Indoor Wall Mount Battery.
- Does NOT have confirmed fitment with EG4 280Ah or 314Ah Indoor Wall Mount Battery models [NEEDS VERIFICATION].
- Not intended for outdoor/AllWeather-rated EG4 battery enclosures.
Compliance & Environment
| Category | Value |
|---|---|
| UL Listing | [NEEDS VERIFICATION] |
| NEC Ampacity Rating | [NEEDS VERIFICATION] |
| IP Rating | [NEEDS VERIFICATION] |
| Environment Designation | Indoor Rated |
FAQ
What size is this conduit box built for?
This conduit box is designated for the EG4 100Ah Indoor Wall Mount Battery. Exact conduit knockout size and wire gauge capacity are not specified in available manufacturer data [NEEDS VERIFICATION].
Is this conduit box rated for outdoor installation?
No. This is listed as Indoor Rated. Do not install it in an outdoor or exposed-weather location.
Will this conduit box fit EG4's 280Ah or 314Ah wall mount batteries?
That is not confirmed. This SKU is designated for the 100Ah Wall Mount Battery specifically. Do not assume fitment across the 280Ah or 314Ah wall mount models without checking with MSSD first.
What terminal or lug sizes does this box accept?
Terminal and lug sizing is not provided in current manufacturer data for this part [NEEDS VERIFICATION].
Warranty & Registration
Manufacturer warranty terms for this conduit box are not included in the provided data [NEEDS VERIFICATION]. Check the "Resources (System Manuals and Warranty)" Tab above for the current warranty document, or ask us before you order and we'll confirm coverage for your system.
