This is the conduit box accessory for EG4 wall mount indoor batteries — a wiring enclosure that gives you a clean, code-friendly way to route conductors into the battery cabinet instead of drilling ad-hoc holes in the case.
Field-installed conduit accessories like this one exist to keep your wiring entry point sealed, strain-relieved, and inspection-friendly. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Designed as a buildable conduit box accessory for the EG4 Wall Mount Indoor Battery.
- Indoor-rated enclosure — manufacturer data does not list an IP rating or outdoor/all-weather certification for this specific accessory.
- NOT confirmed compatible with the EG4 AllWeather WallMount Battery — differing enclosure design between indoor and all-weather models is not verified as matching. [NEEDS VERIFICATION]
- NOT confirmed compatible with EG4 Server Rack, Free Standing, Stackable, or Mobile/Golf battery lines — source data only references the wall mount indoor family. [NEEDS VERIFICATION]
- Wire gauge, knockout size, and terminal/lug specifications are not listed in the source data. [NEEDS VERIFICATION]
Conduit entry points are a common spot for pinched insulation and loose strain relief, both of which raise resistance at the entry fitting over time. Left unchecked, that resistance point can heat under load and eventually contribute to a fault at the battery terminal block. Before closing up the box, check that conductors are seated fully in any strain-relief fitting and that the enclosure knockouts are properly sized to the conduit — an improperly sized knockout is a common cause of chafed insulation. Verify termination torque at the battery's terminal block with a digital torque wrench per the battery manufacturer's spec sheet, and route/size conductors according to NEC ampacity tables for the circuit's continuous current. Confirm exact torque and gauge requirements against the EG4 battery documentation in the Resources tab before energizing the circuit.
Key Benefits
- Purpose-built as a wall mount battery accessory rather than a generic universal box.
- Buildable design lets you configure the conduit entry to match your specific wiring run.
- Indoor-rated construction matched to the EG4 Wall Mount Indoor Battery's intended install environment.
- Keeps wiring entry enclosed and organized at the battery cabinet, supporting a cleaner inspection pass.
Technical Table
| Spec | Value | Unit |
|---|---|---|
| Brand | EG4 | — |
| SKU | EG4CONDUITBOXWM | — |
| Product Type | Buildable Conduit Box | — |
| Rating | Indoor | — |
| Compatible Parent System | EG4 Wall Mount Indoor Battery, 48V 280AH | — |
| Price | 109.99 | USD |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: EG4 Wall Mount Indoor Battery (48V 280AH).
- NOT confirmed to fit: EG4 AllWeather WallMount Battery. [NEEDS VERIFICATION]
- NOT confirmed to fit: EG4 Server Rack, Free Standing, Stackable, or Mobile/Golf battery models. [NEEDS VERIFICATION]
- NOT rated for outdoor or all-weather exposure based on available manufacturer data.
Compliance & Environment Table
| Spec | Value | Unit |
|---|---|---|
| Environment Rating | Indoor | — |
| UL Listing | [NEEDS VERIFICATION] | — |
| IP Rating | [NEEDS VERIFICATION] | — |
| NEC Ampacity Reference | [NEEDS VERIFICATION] | — |
FAQ
What is this conduit box used for?
It is a buildable conduit entry box designed to pair with the EG4 wall mount indoor battery, giving you a defined, enclosed path for wiring into the battery cabinet.
Is this rated for outdoor installation?
No. This unit is labeled indoor rated. The manufacturer data provided does not confirm an outdoor or all-weather rating, so treat this as an indoor-only accessory.
Will this fit the EG4 AllWeather WallMount battery?
That is not confirmed in available specifications. This conduit box is listed against the indoor wall mount battery, and cabinet dimensions between indoor and all-weather models are not verified as identical. Confirm fitment before ordering.
What wire gauge or terminal size does this box accept?
That detail is not specified in current manufacturer data. [NEEDS VERIFICATION]
Warranty & Registration
Manufacturer warranty terms for this specific conduit box accessory are not included in the provided data. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the applicable warranty documentation, or ask us before you order if you need confirmation on coverage.
