This is the weatherproof conduit box that protects the cable connections on your EG4 48V PowerPro battery system, keeping wiring sealed from moisture and keeping hands away from live connections during install or inspection.
A conduit box is not a cosmetic add-on. It is the enclosure that houses your battery-side electrical connections and cabling, shielding them from rain, dust, and accidental contact during service or inspection. For a PowerPro installation, running exposed cable glands and grommets without an enclosure leaves your terminations open to weather intrusion and physical damage, both of which raise long-term fault risk. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
- Purpose-built enclosure for EG4 48V PowerPro battery and battery system cabling
- Includes 9x conduit box plugs to seal unused ports
- Includes 9x battery-to-conduit-box grommets for clean cable pass-through
- Includes 16x conduit box cable glands for sealed strain relief on each conductor
- NOT confirmed compatible with EG4 battery models outside the PowerPro line [NEEDS VERIFICATION]
- NOT a substitute for proper conductor sizing, overcurrent protection, or grounding required by your local electrical code
Unsealed cable glands are a common source of nuisance moisture ingress on outdoor PowerPro installs, especially where the enclosure sees direct rain exposure. Over time, moisture at a terminal connection accelerates corrosion and can lead to intermittent connection faults or ground faults at the inverter. Before closing up the box, check each gland with a torque driver appropriate to the gland manufacturer's spec and verify a firm, even compression around the cable jacket — don't just hand-tighten. Confirm the enclosure and grommet seating meets your local code requirements for outdoor electrical enclosures before final sign-off.
Key Benefits
- Enclosure designed specifically for EG4 PowerPro cable and connection management
- Weatherproof housing protects terminations from rain and dust intrusion
- Cable glands provide sealed strain relief at each conductor entry point
- Grommets protect cable jackets from abrasion where they pass into the battery housing
- Plugs seal off unused conduit ports to maintain the weatherproof rating of the box
| Spec | Value | Unit |
|---|---|---|
| Compatible System | EG4 48V PowerPro battery / battery system | - |
| Conduit Box Plugs Included | 9 | pcs |
| Battery to Conduit Box Grommets Included | 9 | pcs |
| Cable Glands Included | 16 | pcs |
| Conduit Boxes Included | 1 | pcs |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Compatibility & Fitment
- Fits: EG4 48V PowerPro battery and PowerPro battery systems
- Does NOT have confirmed fitment with other EG4 battery series or non-PowerPro systems [NEEDS VERIFICATION]
- Does NOT include internal conductors, lugs, or breakers — this is an enclosure and sealing kit only
| Compliance/Environmental Item | Value |
|---|---|
| Weather Protection | All-weather rated enclosure (per manufacturer description) [NEEDS VERIFICATION for specific IP rating] |
| UL Listing | [NEEDS VERIFICATION] |
| NEC Ampacity Reference | [NEEDS VERIFICATION] |
FAQ
What battery systems is this conduit box compatible with?
This conduit box is compatible with EG4's 48V PowerPro battery and battery systems.
Is this conduit box rated for 48V systems?
Yes, it is built for EG4's 48V PowerPro system.
What comes included with the conduit box?
It includes 1 conduit box, 9 conduit box plugs, 9 battery to conduit box grommets, and 16 conduit box cable glands.
Will this conduit box work with other battery brands?
Compatibility outside the EG4 48V PowerPro family is not confirmed in manufacturer data. Confirm fitment before ordering if you run a different battery system.
Warranty & Registration
Manufacturer warranty terms for this item are not included in the source data provided. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the manufacturer's specific warranty coverage and registration steps. [NEEDS VERIFICATION]
