This is the conduit box that lets you route and terminate cabling for an EG4 PowerPro Indoor battery installation without exposed wire runs. It's built for installers who want a clean, code-conscious cable entry point on wall-mounted energy storage systems.
The EG4 PowerPro Indoor System is a 14.34 kWh wall-mountable home energy storage unit intended for grid-tied and hybrid setups in homes, cabins, offices, and light commercial spaces. This conduit box is the accessory that manages the field wiring for that system, giving you a fixed, enclosed pathway for conductors instead of loose cable runs behind the battery cabinet. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
- Designed specifically for the EG4 PowerPro Indoor System (14.34 kWh) wiring layout.
- Supports clean conduit entry and cable termination at the battery enclosure.
- NOT confirmed for use with other EG4 or third-party battery enclosures — fitment data outside the PowerPro Indoor system is [NEEDS VERIFICATION].
- NOT a substitute for a UL9540/UL9540A-rated battery enclosure — this is a cable management accessory, not a certified pressure or fire enclosure component on its own.
- Purpose-built enclosure sized to the EG4 PowerPro Indoor System's cable entry points.
- Supports a cleaner, more serviceable wiring installation versus open cable runs.
- Pairs with a system rated for an 8,000-cycle lifespan when installed to spec.
- Complements the parent system's UL9540, UL9540A, and UL1973 certifications by keeping field wiring enclosed and organized.
| Spec | Value | Unit |
|---|---|---|
| SKU | CNT100 | — |
| Compatible Parent System | EG4 PowerPro Indoor System | — |
| Parent System Capacity | 14.34 | kWh |
| Parent System Cycle Life | 8,000 | cycles |
| Parent Enclosure IP Rating | IP65 | — |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
- Fits: EG4 PowerPro Indoor System (14.34 kWh) installations requiring an enclosed conduit/cable path.
- Does NOT have confirmed fitment with other EG4 product lines or third-party indoor ESS enclosures.
- Does NOT replace or substitute the UL-listed battery enclosure itself — it is a wiring accessory only.
| Certification/Rating | Applies To | Value |
|---|---|---|
| UL9540 | EG4 PowerPro Indoor System (parent) | Certified |
| UL9540A | EG4 PowerPro Indoor System (parent) | Certified |
| UL1973 | EG4 PowerPro Indoor System battery pack (parent) | Certified |
| IP65 | EG4 PowerPro Indoor System enclosure (parent) | Rated |
FAQ
What is the Indoor Buildable Conduit Box used for?
It provides a conduit entry and cable management enclosure for wiring into the EG4 PowerPro Indoor System, keeping cable runs organized and protected.
Does this conduit box fit any battery system besides EG4 PowerPro Indoor?
The manufacturer data provided identifies compatibility with the EG4 PowerPro Indoor System only. Fitment with other enclosures is not confirmed and should be verified before ordering.
Is this conduit box rated for outdoor use?
The parent EG4 PowerPro Indoor System enclosure carries an IP65 rating suitable for indoor or protected outdoor use. Specific IP rating data for the conduit box itself was not provided by the manufacturer.
What certifications back the EG4 PowerPro system this box is designed for?
The parent EG4 PowerPro Indoor System carries UL9540, UL9540A, and UL1973 certifications, per the manufacturer.
Warranty & Registration
Manufacturer warranty terms specific to the Indoor Buildable Conduit Box were not included in the supplied data. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for the current manufacturer warranty documentation and registration requirements.
