The HVAC Mirage Ventus X 12,000 BTU 19 SEER2 Single-Zone Mini Split System provides efficient, quiet cooling and heating for your space. It is designed to offer a complete turn-key solution for targeted comfort control.
This system features Variable Speed Comfort, meaning the inverter-driven compressor adapts smoothly to temperature changes, enhancing both efficiency and quiet operation. Its wall-mounted design ensures optimal airflow for targeted comfort.
Indoor Air Handler
Outdoor Condenser
Wireless Remote Control
Installation Requirements & Accessories
- Requires a dedicated 115V single-phase electrical circuit.
- Requires a 1/4" Liquid x 1/2" Suction copper line set (NOT included).
- Wall sleeve/mounting bracket NOT included.
- Professional installation is required to validate the warranty.
Pro-Installer Tip
Prevent Leaking Flare Connections: To avoid refrigerant loss on standard flare systems, always use a Digital Torque Wrench when tightening the 1/4" and 1/2" copper flare nuts. Proper torquing ensures a perfect seal and prevents "E1" communication codes caused by low refrigerant charge. As per EPA 608 mandates, all connections should be pressure tested and vacuumed below 500 microns before releasing the R-410A factory charge.
Key Benefits
- High-efficiency 19.0 SEER2 rating for lower energy bills.
- Variable speed inverter technology maintains precise temperatures.
- Eco-friendly R-410A factory direct pre-charged refrigerant.
- Compact, unobtrusive wall-mount design.
- Included wireless remote control for convenient adjustments.
Technical Specifications
| Attribute | Specification |
|---|---|
| Cooling Capacity | 12,000 BTU/h (1.0 Ton) |
| SEER2 | 19.0 |
| Electrical Voltage | 115V |
| Indoor Unit Architecture | Wall Mounted |
| Zone Count | 1 |
| DIY Status | No — Professional Installation Required |
| Line Set Connections | 1/4" Liquid x 1/2" Suction |
| Refrigerant | R-454B (Factory Pre-Charged) |
Compatibility & Fitment
- Compatible with matched AHRI-certified indoor (IMZH120C) and outdoor (OMZH120C) units.
- Compatible with dedicated 115V single-phase circuits.
- Not compatible with 208/230V circuits.
- Not included: Line set NOT included unless explicitly listed as a DIY pre-charged kit.
FAQ
- Is professional installation required to keep the warranty valid, or is this a true DIY kit?
- This system requires professional installation to keep the warranty valid; it is not a DIY kit.
- What electrical voltage is required for this system?
- This system requires a dedicated 115V power supply.
- Is the line set included?
- No, a line set is not included. You will need a 1/4" Liquid x 1/2" Suction line set.
Compliance & Warranty
This system includes a 7-Year Compressor and 5-Year Parts Limited Warranty. To ensure coverage, installation must be performed by a licensed HVAC professional following all local codes and manufacturer guidelines.
4 Reviews Hide Reviews Show Reviews
-
Smooth Installation & Fast Shipping
Arrived well packaged on a pallet. All components were clearly labeled. System started up immediately upon vacuum leak test and charge release.
-
Great Value Direct from Manufacturer
Compared this model to higher priced brands and could not be happier. Clean aesthetic, high SEER2 efficiency, and clear submittal sheets. Fast order processing.
-
Outstanding Heating Capacity in Cold Weather
We bought this unit for supplemental heating in our garage workspace. It ran flawlessly all winter through sub-zero temperatures. Great build quality and technical documentation.
-
Extremely Quiet & Efficient Heat Pump
Installed this system in my home office. It is whisper quiet inside and cools the room down in under 5 minutes. Shipping from Mini Split Systems Direct was fast with liftgate delivery included.
