HVAC Mirage | 9,000 BTU | 19.0 SEER2 | Wall Mounted | Single-Zone Mini Split System | 115V | IMZH090C / OMZH090C

The HVAC Mirage Ventus X 9,000 BTU 19.0 SEER2 is a complete single-zone ductless mini split system designed to provide efficient cooling and heating for individual rooms. Ideal for residential additions or targeted climate control, this wall-mounted system offers quiet, variable-speed comfort without the need for ductwork.

This single-zone system pairs the IMZH090C wall-mounted indoor air handler with the OMZH090C outdoor inverter condenser. The wall-mounted design maximizes floor space while delivering targeted climate control with variable-speed efficiency.

Indoor Air Handler

Outdoor Condenser

Wireless Remote Control

Installation Requirements & Accessories

• Requires a dedicated 115V (110V / 60Hz 1Ph) electrical power supply.
• Requires a 1/4" Liquid x 3/8" Suction copper line set for connections.
• Not Compatible With: 208/230V circuits.
• Not Included: Line set NOT included unless explicitly listed as a DIY pre-charged kit.
• Not Included: Wall sleeve or mounting bracket for the outdoor unit.

Pro-Installer Tip

Preventing Leaking Flare Connections: When installing this non-DIY system, address the risk of leaking flare connections by using an Eccentric Flaring Tool to ensure precise, even flares, and a Digital Torque Wrench to tighten the 1/4" and 3/8" connections to factory specifications. This prevents long-term refrigerant loss and ensures the R-410A charge is maintained. Following proper vacuum procedures (below 500 microns) is also mandated by EPA Section 608 requirements to protect environmental efficiency.

Key Benefits

• Complete turn-key match including the IMZH090C indoor unit and OMZH090C outdoor unit.
• Variable speed comfort driven by an efficient inverter compressor.
• High-efficiency 19.0 SEER2 rating for reduced energy consumption.
• Operates on standard 115V power, ideal for many residential applications.
• EPA AIM Act Compliant Low-GWP Refrigerant system.

Compatibility & Fitment

• Compatible: Matched AHRI-certified combination of IMZH090C (Indoor) and OMZH090C (Outdoor).
• Compatible: Dedicated 115V single-phase electrical circuits.
• Not Compatible With: 208/230V circuits.
• Not Included: Line set NOT included unless explicitly listed as a DIY pre-charged kit.

Frequently Asked Questions

Is professional installation required to keep the warranty valid, or is this a true DIY kit?

This system requires professional installation by a licensed HVAC contractor. It is not a DIY kit. The 7-Year Compressor / 5-Year Parts Limited Warranty requires professional installation.

Is the line set included, and if not, what size do I need to buy?

The line set is [NEEDS VERIFICATION] not included. You will need a copper line set with 1/4" Liquid and 3/8" Suction connections.

What is the voltage requirement for this mini split system?

This system requires a 115V (110V / 60Hz 1Ph) electrical power supply.

Compliance & Warranty

This system comes with a 7-Year Compressor / 5-Year Parts Limited Warranty. Professional installation by a licensed HVAC contractor is required to maintain warranty validity. Installation must adhere to EPA Section 608 requirements regarding refrigerant handling.