The PolarCool SS-Pro 36″ Portable Evaporative Cooler (6622-7000) moves 10,000 CFM through four edge-coated CELdek pads to cool open shops, bays, and wash-down zones up to 3,200 sq ft on a standard 115V circuit.
Why Choose This Configuration: Real-World Value & Install Math
- 38-Gallon Onboard Tank Extends Untethered Shifts: With 38 gallons of rotomolded storage and a 12 GPH evaporation rate at 90 F or hotter, you can run away from a hose bib before rolling back to refill or hooking up a 3/4 in garden hose.
- Narrow 29-Inch Depth Rolls Through Standard Doors: Measuring 51 in W x 66 in H x 29 in D on four 6 in casters, the 6622-7000 clears shop man-doors and aisles that wider 36 in cabinets cannot fit through.
- Stainless Steel Upper Housing Eliminates Paint Failure: Salt air, spray-down moisture, and direct UV light blister powder coat over time, while stainless steel holds its frame and carries a lifetime housing warranty.
- Honest Trade-Off: Direct evaporative cooling adds moisture to the air, so you need open bay doors or exhaust airflow and ambient humidity below 60% RH for meaningful temperature drop.
Overview
If you work around salt air, pressure-wash bays, agricultural wash-downs, or harsh UV exposure, standard painted housings wear out early. The PolarCool 6622-7000 pairs an all-stainless steel upper frame and UV-protected polyethylene reservoir with a 1/2 HP 10-speed direct-drive motor and 3-blade fiberglass propeller. Touchpad controls, automatic low-water pump shutoff, a hinged top cover, and a 20 ft 120VAC GFCI cord make daily operation and pad access straightforward.
System Components
- PolarCool SS-Pro 36″ direct-drive portable evaporative cooler with stainless steel upper housing and 3-blade fiberglass propeller (6403-5605)
- One-piece UV-protected rotationally molded 38-gal polyethylene water reservoir with 4 x 6 in heavy-duty casters (2 fixed, 2 locking swivel)
- 1/2 HP 115V variable-speed motor (6422-6023), 120V submersible water pump (6422-0645), automatic low-water shutoff switch (3001-0050), and touchpad control panel (6450-6060)
- Four edge-coated, algae-resistant CELdek cooling pads measuring 12 in W x 48 in H x 6 in D (replacement set 6450-6014) plus 3/4 in float valve and drain adapter
- 20 ft 120VAC GFCI-protected power cord with front cord-wrapping bracket
Installation Requirements & Accessories
- Dedicated grounded 115-120V, 60 Hz single-phase receptacle matching 8.5A operating current (10A rated draw) within reach of the 20 ft GFCI cord
- Continuous 3/4 in standard garden hose feed for unattended operation, or periodic batch filling of the 38-gal reservoir
- Open cross-ventilation (bay doors, windows, or exhaust fans) so humidified exhaust air leaves the workspace instead of stagnating
- Break in new factory CELdek pads by running the water pump before regular use and draining the initial residue per manual steps
- Not Included: Water supply hose, drain shutoff hose, protective vinyl cover (6521-0051), and PolarCool 90-gal water cart (6540-1809)
- Not Compatible With: Sealed or air-conditioned indoor rooms with zero fresh air exhaust, 230-240V outlets, or bleach and ammonia cleaning chemicals
Pro-Installer Tip
Fresh makeup air and weekly water purging make or break any evaporative cooler. Position the 6622-7000 near an open bay door or window with an exit opening opposite the unit so humid air sweeps out of the room instead of condensing on tools. Before shutting down at the end of a shift, turn off the pump and let the fan dry out the pads to stop algae and mineral scale buildup, remembering that evaporative coolers deliver their sharpest drop when ambient humidity stays below 60% RH.
Key Benefits
- Delivers 10,000 CFM across up to 3,200 sq ft using a 10-speed direct-drive fan and 16 sq ft of 6 in deep CELdek media
- Stainless steel upper cabinet resists coastal salt spray, chemical wash-downs, rust, and sun chalking
- 38-gal rotomolded lower tank prevents leaks and rust while automatic low-water shutoff protects the 120V pump
- Hinged top cover opens quickly without tearing down side panels when rinsing the spray bar, pump filter, and pads
- UL 507 listed and shipped with a 20 ft GFCI-protected 120VAC cord plus cord-wrap bracket
Technical Specifications
| Specification | Value | Unit |
|---|---|---|
| Brand | PolarCool | |
| Series | PolarCool SS-Pro | |
| Model Number | 6622-7000 | |
| Fan Diameter | 36 | in |
| Propeller Type | 3-Blade Fiberglass (Part 6403-5605) | |
| Airflow Capacity | 10,000 | CFM |
| Effective Cooling Area | 3,200 | sq ft |
| Drive Type | Direct Drive | |
| Speed Settings | 10-Speed Variable (Touchpad Control Panel 6450-6060) | |
| Motor Rating | 1/2 HP, 115V, 60 Hz Variable-Speed (Part 6422-6023) | |
| Electrical Supply | 115-120 | VAC, 60 Hz, 1-Phase |
| Operating Current | 8.5 | A |
| Power Consumption Rating | 10 | A at 115V, 60 Hz |
| Power Cord | 20 ft, 120VAC with Inline GFCI Plug (Part 6422-4004) | |
| Reservoir Capacity | 38 | Gallons |
| Water Consumption Rate | 12 | GPH |
| Rated Water Rate Ambient | At least 90 F | |
| Effective Humidity Ceiling | Below 60% RH | |
| Low-Water Pump Shutoff | Equipped (Automatic Liquid Level Switch 3001-0050) | |
| Water Pump | 120V, 60 Hz Submersible Pump (Part 6422-0645) | |
| Cooling Media | 4 Pads – Edge-Coated CELdek 12 in W x 48 in H x 6 in D (Set 6450-6014) | |
| Cooling Media Surface Area | 16 | sq ft |
| Cooling Media Volume | 8 | cu ft |
| Water Inlet Connection | 3/4 in Standard Garden Hose with Float Valve (Part 6422-6016) | |
| Drain Outlet Connection | 3/4 in Garden Hose Adapter (Part 0006-7010 / 0006-0722) | |
| Upper Housing Material | Corrosion-Resistant Stainless Steel | |
| Lower Reservoir Material | UV-Protected Rotationally Molded Polyethylene | |
| Mobility / Mounting | 4 x 6 in Heavy-Duty Casters (2 Fixed 6422-6021, 2 Locking Swivel 6422-6020) | |
| Unit Dimensions (W x H x D) | 51 x 66 x 29 | in |
| Unit Weight (Empty / Full) | 198 Empty / 515 Full | lbs |
| Shipping Dimensions (W x H x D) | 55 x 74 x 32 | in |
| Shipping Weight | 314 | lbs |
| Safety Certification | UL 507 Listed | |
| Manufacturer Warranty | 3 Years Motor, Pump and Electronics / Lifetime Stainless Steel Housing |
Compatibility & Fitment
- Compatible With: Standard grounded 115-120V, 60 Hz single-phase circuits rated for 8.5A running / 10A consumption via 20 ft GFCI cord
- Compatible With: Standard 3/4 in garden hose water supply fittings and PolarCool 90-Gal Water Cart (6540-1809)
- Compatible With: PolarCool Pro 36 in Replacement Pad Set (6450-6014), Single Pad (6450-6070), Protective Cover (6521-0051), and Evap-O-Matic Tablets
- Not Compatible With: 230-240V receptacles or three-phase electrical systems
- Not Compatible With: PolarCool Classic 36 in 8 in deep pads (6450-6010) or Classic 36 in protective cover (6421-13012)
- Not Compatible With: Harsh cleaners containing bleach or ammonia
- Not Included: Garden water supply hose and drain shutoff hose
- Not Included: PolarCool 90-Gallon Water Cart (6540-1809)
- Not Included: Pro 36 in Protective Vinyl Cover (6521-0051)
- Not Rated For: Sealed enclosed rooms without open doors, windows, or mechanical exhaust
- Not Rated For: High-humidity environments consistently above 60% RH
- Not Rated For: Spot cooling without grounded electrical circuit protection
Frequently Asked Questions
How much floor space can the PolarCool SS-Pro 6622-7000 cool?
The 6622-7000 moves 10,000 CFM across an effective cooling area of 3,200 sq ft in well-ventilated spaces where relative humidity stays below 60 percent.
How large is the water reservoir and can you connect a continuous garden hose?
It holds 38 gallons in its rotationally molded polyethylene tank and uses about 12 GPH in 90 F or warmer spaces. A built-in 3/4 in garden hose float valve lets you connect a hose for continuous automatic fill.
What electrical outlet does the PolarCool 6622-7000 require?
You plug it into a standard grounded 115-120V, 60 Hz single-phase outlet. It draws 8.5A running (10A power consumption rating) and includes a 20 ft GFCI-protected cord.
What protects the pump and housing in wet shop or outdoor use?
An automatic low-water shutoff switch stops the 120V submersible pump before the tank runs dry, and the stainless steel upper cabinet and GFCI cord are built for wet environments and UL 507 listed.
Compliance & Warranty
Operation on a properly grounded circuit matching the nameplate voltage and amperage rating, along with routine water and cooling-pad maintenance per the PolarCool Owner’s Manual, is required to maintain warranty coverage. PolarCool (HH Technologies, Inc.) backs the 6622-7000 from invoice date with a 3-year limited warranty on the motor and electrical components plus a lifetime limited warranty on the stainless steel housing (excluding ordinary wear and tear, labor, freight, and unauthorized modifications or non-PolarCool parts). Unit registration and proof of original purchase are required. Have a question on sizing, electrical hookup, or replacement parts before you order? Reach out anytime — we always reply back.

















Reviews
There are no reviews yet.