null Skip to main content

Polar Cool | 1ft-5ft | HVLS Ceiling Fan Aluminum Extension Bar | PP-015 | For Skyblade HVLS Fans

Polar Cool

$60.00 - $195.00
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout
Direct Factory Delivery: Ships directly from wholesale warehouse with scheduled liftgate delivery & tracking.
Adding to cart… The item has been added
This is an extension bar for mounting your Skyblade HVLS ceiling fan lower from the ceiling, letting you dial in the correct blade height above the floor. It's sold in fixed lengths from 1 to 5 feet, so you pick the drop that matches your ceiling height and mounting hardware. Extension bars are a straightforward but important part of an HVLS fan install: get the length wrong and you either lose ceiling clearance or end up with a fan hanging too high to move air effectively at floor level. This bar is built from aluminum and offered in fixed lengths so you can match drop height to your specific ceiling. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
  • Available in 1 ft, 2 ft, 3 ft, 4 ft, and 5 ft lengths, in 1-foot increments
  • Standard assembly includes a 6-1/2" bar
  • Constructed from aluminum
  • Compatible with Skyblade HVLS ceiling fans
  • NOT compatible with the I-Beam Kit — do not combine this extension bar with I-Beam mounting hardware
Pro-Installer Tip: Stacking an extension bar under a fan without checking total drop against the manufacturer's minimum blade-to-floor clearance is a common friction point — too much drop can put the blade tips within reach or too close to racking below. Confirm your total mounting height (ceiling bracket + extension bar length + fan body) before final assembly to prevent an unsafe installed height or a callback to shorten the drop. Use a tape measure and a torpedo level at the mounting point to verify the bar hangs plumb before you torque down the coupling hardware — a bar installed out of plumb transmits vibration into the ceiling structure over time. Follow the manufacturer's structural mounting limits referenced in the Resources tab, and never mix extension bar hardware with the I-Beam Kit, since the two mounting systems are not engineered to interface.
  • Aluminum construction for the extension bar body
  • Fixed-length options let you match drop height without field-cutting
  • 1-foot increments simplify ordering for varied ceiling heights
  • Standard assembly ships with a 6-1/2" bar included
SpecValueUnit
Length Option 11ft
Length Option 22ft
Length Option 33ft
Length Option 44ft
Length Option 55ft
Length Increment1ft
Standard Assembly Bar Length6-1/2in
MaterialAluminum

Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.

Options & SKUs

VariantSKUPrice (USD)
1 ftPP-015.160.00
2 ftPP-015.295.00
3 ftPP-015.3130.00
4 ftPP-015.4160.00
5 ftPP-015.5195.00
  • Fits: Skyblade HVLS ceiling fans requiring an aluminum extension bar for adjustable mounting drop
  • Fits: Installations needing 1 ft through 5 ft of additional drop, in 1-foot increments
  • Does NOT fit: Installations using the I-Beam Kit — the extension bar is not compatible with that mounting system
ItemDetail
Material SafetyAluminum construction
Mounting Compatibility RestrictionNot compatible with I-Beam Kit

FAQ

What lengths does this extension bar come in?
It's available in 1 ft, 2 ft, 3 ft, 4 ft, and 5 ft lengths, in 1-foot increments.

Will this work with an I-Beam mounting kit?
No. The manufacturer states this extension bar is not compatible with the I-Beam Kit.

What is included with standard assembly?
Standard assembly includes a 6-1/2 inch bar.

What material is the extension bar made from?
This extension bar is made from aluminum.

Warranty & Registration

Manufacturer warranty terms for this extension bar are not included in the data provided for this listing. [NEEDS VERIFICATION] Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for manufacturer warranty documentation, or contact us and we'll help track it down — we always reply back.

Wholesale Specifications & Compliance Guarantee

Official MSSD Direct Distribution Data for Polar Cool Item #

🚚 Wholesale Freight Shipping Structure

  • Palletized Freight Delivery: Securely packaged and strapped to prevent coil or cabinet transit damage.
  • Liftgate Unloading Included: Every system price reflects complete residential or jobsite liftgate unloading services.
  • Terminal Tracking: Direct carrier tracking with scheduled delivery appointment confirmation.

🛡️ EPA Refrigerant & Safety Compliance

  • Low-GWP Mandate Certified: Compliant with 2025–2026 EPA AIM Act guidelines (R-454B / R-32 next-gen refrigerants).
  • Factory Parts Protection: Full manufacturer warranty integrity preserved via authorized wholesale distribution channels.
  • Factory Pre-Charged: Outdoor condensing units engineered and tested for rated line-set lengths.

📜 Manufacturer Warranty Protection

Authorized Dealer Warranty Protection: All Polar Cool systems purchased through MSSD include full factory manufacturer warranty coverage.

📊 System Engineering & Performance Specifications

Product Model Title Polar Cool | 1ft-5ft | HVLS Ceiling Fan Aluminum Extension Bar | PP-015 | For Skyblade HVLS Fans
Factory SKU / Part #
Brand Entity Polar Cool
Wholesale Freight Rate $0.00 (Palletized Liftgate Unloading Included)