This steel extension bar raises your Skyblade HVLS ceiling fan away from an I-beam mount, giving you the extra drop distance needed for proper blade clearance. It's an I-beam kit only — the fan motor, hub, and blades are sold separately.
Getting the drop distance right on an HVLS fan installation is not a cosmetic detail — it directly affects airflow pattern, blade clearance, and structural load path back to the building frame. This steel extension bar lets you dial in the correct height above the standard 6-1/2" assembly bar without fabricating a custom mount. Note: If you would like to review the manufacturer Product Specifications, Warranty, Brochure, etc., for this system, please refer to the "Resources (System Manuals and Warranty)" Tab above on this page.
Critical Fitment & Requirements
- Available lengths: 1 ft, 2 ft, 3 ft, 4 ft, and 5 ft, sold in 1-foot increments.
- Standard assembly bar (included with the base fan setup) measures 6-1/2 inches; this extension is used in addition to that.
- Constructed of steel, designed specifically for I-beam mounting configurations.
- This is an I-Beam Kit Only — it does NOT include the fan motor, hub, or blades.
- Compatibility with mounting structures other than I-beams is not specified in manufacturer data [NEEDS VERIFICATION].
Extension bar stacking on HVLS fans introduces a common friction point: added leverage at the I-beam connection point, which increases vibration transfer and stresses the mounting hardware if not torqued evenly on all sides. Uneven torque over time can loosen fasteners and lead to wobble or, in worst cases, mounting fatigue. Check bar alignment with a torpedo level before final tightening, and use a calibrated torque wrench to bring bolts to the manufacturer's specified value evenly in a cross pattern — the same principle used when torquing wheel lugs. Follow ASHRAE mounting best practices for suspended ceiling equipment, and confirm the I-beam's load rating supports the fan weight plus the added extension length before final installation.
Key Benefits
- Steel construction built for I-beam mounting applications.
- Offered in five length options so you can match the extension to your ceiling height and drop requirements.
- 1-foot increments simplify planning between 1 ft and 5 ft.
- Works alongside the standard 6-1/2" assembly bar rather than replacing your existing mounting hardware.
| Spec | Value | Unit |
|---|---|---|
| Standard Assembly Bar Length | 6-1/2 | in |
| Extension Length Options | 1, 2, 3, 4, 5 | ft |
| Length Increment | 1 | ft |
| Material | Steel | - |
| Mount Type | I-Beam | - |
Note: See "Resources (System Manuals and Warranty)" Tab above for full specifications.
Options & SKUs
| Variant | SKU | Price (USD) |
|---|---|---|
| 1 ft | DP-013.1 | 115.00 |
| 2 ft | DP-013.2 | 125.00 |
| 3 ft | DP-013.3 | 175.00 |
| 4 ft | DP-013.4 | 200.00 |
| 5 ft | DP-013.5 | 250.00 |
Compatibility & Fitment
- Fits Skyblade HVLS ceiling fan installations mounted to an I-beam, using this extension in combination with the standard 6-1/2" assembly bar.
- Available in 1 ft, 2 ft, 3 ft, 4 ft, and 5 ft lengths to match your required drop distance.
- Does NOT include the fan motor, hub, or blades — this is the extension bar/I-beam kit component only.
- Not confirmed for use with non-I-beam mounting structures [NEEDS VERIFICATION].
| Consideration | Guidance |
|---|---|
| Structural Load | Confirm I-beam load rating accommodates fan weight plus extension length before installation. |
| Material | Steel construction. |
| Mounting Standard | Follow ASHRAE mounting best practices for suspended ceiling equipment. |
FAQ
Will this extension bar fit my Skyblade fan?
It's designed for Skyblade HVLS ceiling fans mounted to an I-beam, used with the standard 6-1/2" assembly bar. Confirm your specific fan model's mounting requirements before ordering.
What lengths does this steel extension bar come in?
It's available in 1 ft, 2 ft, 3 ft, 4 ft, and 5 ft lengths, in 1-foot increments.
Does this kit include the fan motor or blades?
No. This is the I-Beam Kit Only — it includes the steel extension bar hardware for I-beam mounting. The fan motor, hub, and blades are not included.
What is the standard assembly bar length before adding an extension?
Standard assembly includes a 6-1/2 inch bar. Choose one of the 1ft-5ft extension lengths to increase the drop distance.
Can I mix and match extension lengths on the same fan?
This depends on your specific Skyblade fan model's mounting requirements. [NEEDS VERIFICATION]
Is this bar compatible with non-I-beam ceiling structures?
This kit is built as an I-beam mount solution. Compatibility with other structural mounting types is not specified. [NEEDS VERIFICATION]
Warranty & Registration
Manufacturer warranty terms for this extension bar are not included in the provided specification data. Please refer to the "Resources (System Manuals and Warranty)" Tab above on this page for warranty details, registration steps, and full manufacturer documentation. [NEEDS VERIFICATION]
